0L15Y 9S12XDP512 Flash Problem

[D80]

9s12xdp512 flash can only read but not write ..
I tried three different programmer..
R260, Xprog-m and ELPROSYS of CodiProg-USB.

Friends have better offer programming flash this mask 0L15Y?

Regards

[r-parts]

i use etl, work perfect.

[hcip]

i use etl, work perfect.

ETL not support in XDP512

[JOHNCICY]

You can use AK 500 can recover flash and write back!

[Zmann]

When using Xprog-m and selecting device, looks at the 'info' window on the left at security byte. Compare the read data to the shown 'unsecured state' (FEh)

[D80]

When using Xprog-m and selecting device, looks at the 'info' window on the left at security byte. Compare the read data to the shown 'unsecured state' (FEh)

Tested... Can not write

[T72]

its not posible to read corect xdp512 flash! All files what we have from codiprog, xprog not corect, a lot addreses are "3F".... so you will not corect dump to write!
If CAS still going to diagnostic, try to reflash via OBD

[seed212]

UPA USB it is work perfect

[hcip]

UPA USB it is work perfect

UPA USB Cannot read Flash correctly of any Motorola MCU
it has also no option for writing of flash

[D80]

its not posible to read corect xdp512 flash! All files what we have from codiprog, xprog not corect, a lot addreses are "3F".... so you will not corect dump to write!
If CAS still going to diagnostic, try to reflash via OBD

a lot address are "3F"...
In s12dg128 and dg256 flash also have these "3F",
is a normal flash dump.

obd read and write only eeprom

[T72]

if xprog was not cracked, maybe it was soft for these Motorola mcu, but you guys buing clones.....
Interesting who will make new tools for us in the future?

[hcip]

Interesting who will make new tools for us in the future?

The chinese Cloners................ he he he

[pandora6]

I have origanal X-prog BOX. i tested device on new not locked and bran new XDP512. X-prog read and write perfect only
not locked device. When you lock device, dont try to read flash
many page has damage in XDP and next time X-prog box dont erase a FALSH. in flash is only garbage but not worked dump.

[Speedosoft]

I think R270 is the only one.

[tachonow]

I think R270 is the only one.

Fcuk it R270. I have it from the first models released last year.
Never managed to make it work. 700usd lost , spread in the wind.

[wyz1056]

****,china.clone tool no good.

[tachonow]

Please guys, better watch on tv . Dont make me nervous . If you have some knowledge or something real to post on subject do it, else your words are only to raise your posts counter here on DK, but for nothing.

[nomis]

Fcuk it R270. I have it from the first models released last year.
Never managed to make it work. 700usd lost , spread in the wind.
Send it to me i try to repair ! I have lot of free time .. he he

[tachonow]

Send it to me i try to repair ! I have lot of free time .. he he

Pm me if you can do something, Ill be glad.

[Speedosoft]

Fcuk it R270. I have it from the first models released last year.
Never managed to make it work. 700usd lost , spread in the wind.

Abosultely disagree. I have all Rosfar original tools but the R260 cannot write the flash content of the XDP512. The R270 does it and mine works very well. I never ever had any issue with. I too am agianst the clones but the primary reason I bought this is because it was the only unit that could erase the 35160 successfully. Then I tested it with 9S12 (all of them), read/write eeprom and flash and it works perfectly. But to be honest I only use if I need to.
That said, I believe you when you said you could never make it work because with the chinese it's sort of a gamble when you buy a product, it either works or not.

Regards.

[drpeter]

Abosultely disagree. I have all Rosfar original tools but the R260 cannot write the flash content of the XDP512. The R270 does it and mine works very well. I never ever had any issue with. I too am agianst the clones but the primary reason I bought this is because it was the only unit that could erase the 35160 successfully. Then I tested it with 9S12 (all of them), read/write eeprom and flash and it works perfectly. But to be honest I only use if I need to.
That said, I believe you when you said you could never make it work because with the chinese it's sort of a gamble when you buy a product, it either works or not.

Regards.

At this moment you can get the R270 for 285 dollar (free shipping!). But is it worth the gamble?

[joaopereira]

may indicate the location of sale?

[didi_du_93000]

No one have new about read and write without error a flash of a 9s12xdp512???

[Zmann]

for details xprog verifying error by search the forum, 'counter' and 'xprog' and there should be answer.

or buy a brand new clone (v5.0) and keeps using it for about D0 (208) times before error.