Log in

View Full Version : mitsubishi montero petrol engine ecu swap


medsa
19th August, 2011, 04:57 PM
hello mates please can you show the location of the immo
it s a mitsubishi montero 2001 model petrol v6
here are the pictures of the ecu i have the old one and i want to replace it with a used one
sogaro
19th August, 2011, 06:27 PM
Just program it with a Tcode or SBB, no need to bother about eeprom or anything of such
agabna
19th August, 2011, 07:35 PM
Just program it with a Tcode or SBB, no need to bother about eeprom or anything of such

hello
the ic u need to swap i dont know
but i am not sure in some type of mitsubishi ecu is related with the immo box so some times u cant program the ecu without the immo box

u need them both to program new key

but try if it works let us know
lateef
20th August, 2011, 06:24 AM
if you program with tcode or sbb in case of ecu changing in won`t work.
lateef
20th August, 2011, 06:26 AM
the is one option find if it has immo box program new chip to the immo, when the new chip find the the ecu it will adapt.
medsa
20th August, 2011, 07:47 AM
ok i ll try it with ad 100 PRO and report thanks again to all the informations
Zohar
20th August, 2011, 09:42 PM
This ECU`s don`t have external eeprom IC. All immo data is stored in flash of (ECU firmware) RENESANS MCU MH83xx. The different types of this MCU`s (like 8301, 8302, 8304, 8305, 8305, 8306, etc.) ) have another bootloaders, memory area sizes and flashing methods. You should have a special hardware and software for reading/writing this MCUs.

BR
naelraddad
20th August, 2011, 10:42 PM
hi friends as i know in old mitsubishi it is not possible to make adaptation between second hand immo box and ecu
you need immo box + ecu from the same car and you can program the car original key
( as in mitsubishi bulitines you must replace both of immo box and ecu even when replace with new )

regards
Zohar
21st August, 2011, 08:53 AM
hi friends as i know in old mitsubishi it is not possible to make adaptation between second hand immo box and ecu
you need immo box + ecu from the same car and you can program the car original key
( as in mitsubishi bulitines you must replace both of immo box and ecu even when replace with new )

regards

Ecu exchange is possible! Also any modification in ROM is possible too . This is MMC flasher software website - ??????? ??????? (http://www.mmcflash.ru/catalog/)
This stuff can do many Mitsubishi and Mazda vehicles.

BR