pathfinder r50 nats 5 problem

[automatemad]

hi all

i have a problem with nissan petrol pathfinder 2001 r50 ,vg33

when i try to program mvp ,t300 it shows programming........

but nothing happens .am using 5523 since i dont see in code in dump

then i tried immo with known code but gets the same results programing.........but nothing


then i tried using x431 but i dont get menu for c/u from both 14 pin and 16pins as it has both ports
i chose 14pin sw and used 16pin connectors all options

when i tried diagnose engine says no dtc but further test maybe needed

i remove airflow but still didnt get any dtcs:dontknow:

when i connect immo unit to abrites to nissan sw to write key or read pincode immo does not communicate via k-line

immo in the car produces 1.19 v on antenna for about two seconds on ignition on mean it might be reading transponder:dontknow:



pliz i need your help guys

[Mr_Fix]

This immobox without pincode. Work X431 as NATS-2 or NATS-4.

[automatemad]

does anyone know where ecu data in the immo dump is written

i have added keys to new immo i now need to marry ecu and immo to start car

regards

[automatemad]

This immobox without pincode. Work X431 as NATS-2 or NATS-4.
i did try but it didnt give me option for c/u

before i have used on nats 4 successfully ,x431 is normally a good tool for nats 4

regards