TOYOTA G CHIP PROGRAMMING

[nasir]

HI FRIENDS, DOES ANYONE HAS THE SOLUTION FOR PROGRAMMING THE G CHIP MANUALLY IN TOYOTA 2011 MODEL CAR OR ANY TOOL CAN DO THIS .

[usman295]

Tcode Pro can program toyota 2011. Just reset the car immo and then program new keys. Only 1 problem in new toyota and lexus models only in gulf cars land cruiser LX470 cant be programmed with Tcode Pro. Also dont know how to program it some Locksmith program these car but dont know how. Know what they do. They open a box under the dash reset an ic on it and then program it with tcode pro through ObD.

[bram380]

please upload immo dump & keydata.

[shanektm450]

You cant program you need virgine immo and Tech stream to program in new keys ,I learnt the hard way if you need advise I can help what kind of immo box is it for for Hilux or Corrola. Also you need the G-chip and you can buy it from agents for cheap .
PS! You need to understand that this file on the eeproms PAGE4 is locked so you cant see data and so you cant edit dump !!!
Cheers
Shane:wink:

[nasir]

ok i will get the imm part no thanks

[bram380]

To add key data, no need page4.
page1,2 and 3 only.

[shanektm450]

To add key data, no need page4.
page1,2 and 3 only.

Hi if possible then how cause we tried everything, the only machine that can produce key is Tango as the Zedbull sees it as a 4D-67 but its not.
Cheers Shane

[bram380]

Hi if possible then how cause we tried everything, the only machine that can produce key is Tango as the Zedbull sees it as a 4D-67 but its not.
Cheers Shane

TMPro2 & tango can do it.

[lateef]

I use toyota commander and I`ve done many.

[labusas]

Hi, Lateef
Are you using AVDI toy commander Original? I have it. So it works on normal ignition Toy with G chip?
How long does it take once you press reset immo button.
I only need to add key, so can add key be used and no need for immo reset?
Thanks very much

[lateef]

i use AVDI original, when you reset the immo it doesn`t take up to two minutes and you can use it to add the key as well.Done many friend with it.

[LATTINO]

please upload immo dump & keydata.


Dear Brand
posible change G chip by normal 4D-67?

Regards

[ivo123]

not possible exchange of G-chip with ID67.
Reset of immobiliser is possible but can be registered only G-chip.
G-chip is different from ID67.

[bram380]

67 68 70 is 40bit
g-chip 80bit.

[LATTINO]

To add key data, no need page4.
page1,2 and 3 only.

Friends
Can we add data of the G chip in dump like chip 67?

in atach there is a G chip, and the machine
show how 4D67 and never show pag4.

We are waiting the dump friend nasir

Regards

[amir_82013]

hi Thanks.