FG Tech Galletto 2 [Sitemap]

z786

24th August, 2011, 12:31 AM

hi anybody have used this tool,?
isit good?
prices?
new clones possible?
iv been on the website and i cant see any info about this tool?
thanks

wyz1056

24th August, 2011, 01:18 AM

you can chekc siteweb!
Carrozzeria F.lli Galletto (http://www.galletto-flli.it/)

bazare

24th August, 2011, 10:27 AM

new galletto clone is 1600 euro

lolooo1981

24th August, 2011, 11:08 AM

Maybe anyone have car list for new galleto ?

Thanks

z786

24th August, 2011, 11:54 AM

new galletto clone is 1600 euro

works like original?

jolidj

24th August, 2011, 01:15 PM

you bye the original for 2800 euro.work fine .

Eight

24th August, 2011, 02:59 PM

New galeto web page FG Technology (http://www.fgtechnology.it/)
Original is 3300 euro at http://www.vcpowerteam.com/store/product/fgtech-master/

z786

24th August, 2011, 06:20 PM

you bye the original for 2800 euro.work fine .

hi, where is that price?

bazare

24th August, 2011, 06:32 PM

never tested the new galletto clone... but you can't say the original is working great.:) I knew that price for new galletto is 3000 + 1000 / year

z786

24th August, 2011, 07:53 PM

what would you suggest

exxl

24th August, 2011, 10:07 PM

galetto is not bad at all i would say it is great, but most people do underrate it on forums, i don't know why maybe competence or some other interests.

galetto ori and clone both have advantages.

the ori works and has updates but has also subscription 1.000 euro a year and if you don't pay you cant use anymore edc 17 module, bikes, trucks and boats.

the clone you can not update or can update it limited if the supplier has updates but the subscription never ends and you don't lose modules.

now is your choice what is better for you

Eight

24th August, 2011, 10:13 PM

X17 is slightly better solution because it has own memory, useful to writing back org file and more secure writing mod file in case that laptop power fails.

But galeto is cheapest solution that includes obd, bdm and boot mode. I heard that now they are working on update for japan machines.

Also yearly update and support for x17 will increase.For galetho is 1k euro.

VAGR666

24th August, 2011, 11:37 PM

it is the same company, but this site is more oriented for chiptuning

FG Technology (http://www.fgtechnology.it/)

Stanton

25th August, 2011, 08:40 AM

The thing that put me off an original one was 1) their lack of communication when I emailed them 2) too many reports of failing units and excessive repair charge.

In this game we need reliability, and for me can beat a proven track record.....which I couldn't find for the new galletto.

Joe019

25th August, 2011, 10:01 PM

The price of the new galletto clone is expensive.

Think that you can get a new original galletto with one year subscription incluyed and "support" for a 3000 eur. And You will get a secure updates and secure interface....

X17 its a really great great tool. It works really good.
but if you are thinking in buy new galletto, i advice you that its better buy original ;)

BR!

z786

25th August, 2011, 10:24 PM

which ones better, kess v2 or galletto 2?

Joe019

25th August, 2011, 10:53 PM

i had kess v2 in past and i selled two months later.... i dont like kess v2.... its really "special" tool. now im using new galletto and magpro+x17 (both original) and really good tools!! :)

br!

scs-mem

26th August, 2011, 07:57 AM

which ones better, kess v2 or galletto 2?

For 3000 euro u can buy genuine galletto ,and have all enable
car,truck,bike,farm tractor,marine ,bdm,edc17.
One year update is incluse in the price.

Not look for clone,becouse in next month maybe there will be update of interface for new cars and for asian cars.

Update are 1000 euro for year,just like 80 euro month.

Regards

Stanton

26th August, 2011, 08:09 AM

You can't get very far if they don't reply to emails when you've got cash waiting.

Doesn't inspire confidence in future service IMO.

scs-mem

26th August, 2011, 02:18 PM

You can't get very far if they don't reply to emails when you've got cash waiting.

Doesn't inspire confidence in future service IMO.

One month ago ive got 1 opel corda d 1300 edc17,2011 year.
Ive asked to Galletto if was possible to write this car.
He told me read original file and sent me for check.
Later he advised me of wait 2 days before of write car ,just the time for made checksum algo.
Later 2 days ive download new update and write my mod file without problem.

Stanton

26th August, 2011, 03:13 PM

Thats great, but I didnt even get replies to ask about buying...so I cant comment further on their product support :)

scs-mem

26th August, 2011, 04:29 PM

Thats great, but I didnt even get replies to ask about buying...so I cant comment further on their product support :)

They are in vacantion
Will be back on first week of september

Stanton

26th August, 2011, 06:07 PM

I'm talking about a few months ago.

z786

26th August, 2011, 11:02 PM

what the ease of use with galletto scs-mem?

Joe019

26th August, 2011, 11:26 PM

Its easy for use. Select brand, model and driver and go!

Dont be afraid about use, because its easy ;)

BR!

scs-mem

26th August, 2011, 11:29 PM

Yes ,just select and hit button.

z786

27th August, 2011, 01:09 AM

i seen on one website if you buy galletto you get free dpf off files?

bazare

27th August, 2011, 08:00 AM

ecusafe - dpf off files are useless.
working dpf off files always cost money:)

z786

27th August, 2011, 01:46 PM

Welcome to Chiptuning-files (http://www.chiptuning-files.net/TuningTool/fgtech.html)

Package includes:
Main unit
Standard cables
Free realtime techsupport (MSN, Skype)
Training course
Free dpf off
Free vag hot fix
10 Free Tuning Files
included 1 year subscription

bazare

27th August, 2011, 03:24 PM

they are selling a SLAVE unit!!! take care!

jolidj

28th August, 2011, 01:09 AM

hi, where is that price?
you contact a galetto seller in italy and if you have a good smile you bay galletto for 2800 euro.

marcus5

28th August, 2011, 02:21 AM

I use the new rooster for 1 year and I must say that it is really easy to use and is also a really good product, as my friend says JoLidy in Italy it is found on 2800, 3000 ***8364;, but soon released a new interface that will Asian cars too so you might want to wait to buy

cipijoint

24th October, 2011, 08:42 AM

Marcus, what interface u know for denso ecuus?there is in US a tool named OpenPort , but even if read DENSO ecu,who will work on maps?
Here where i am..many cowboys around shout out are tunners but they mostly work on vw audi maps cars.
professionals vag cars...ha ha
Lets see tuners work on japanese and american cars. where they are?

dottecu

3rd November, 2011, 03:26 PM

i need buy clone new galletto ,who have this tool?

moky

3rd November, 2011, 04:13 PM

I search one too,thx.

VAGR666

4th November, 2011, 05:37 PM

i need buy clone new galletto ,who have this tool?

i have one :)

atd

5th November, 2011, 05:50 PM

So how is it working with newest ecus?
Siemens? edc17? Can you read and write properly?

VAGR666

5th November, 2011, 06:33 PM

So how is it working with newest ecus?
Siemens? edc17? Can you read and write properly?

did many, including tricore boot. i am happy with it.

BR

powertdi

7th November, 2011, 09:57 PM

yes its a good choice for this money. But not for Italy as I know. In Italy if you have company you can buy original for the same money. around 1500eur and 150 per/month. For rest of the World good clone is good choice as one of few tools in everyday use. IMHO.

VAGR666

8th November, 2011, 01:21 AM

yes its a good choice for this money. But not for Italy as I know. In Italy if you have company you can buy original for the same money. around 1500eur and 150 per/month. For rest of the World good clone is good choice as one of few tools in everyday use. IMHO.

didn't knew they had that kind of business deal in italy, that is interesting.

BR

moky

11th November, 2011, 09:12 PM

Just buy one.

.

moky

29th November, 2011, 08:10 AM

Someone have got user guide pdf for bdm galletto ?

pinout of bdm?

thx a lot !

Metin

29th November, 2011, 09:04 AM

Someone have got user guide pdf for bdm galletto ?

pinout of bdm?

thx a lot !

yes, contact pm.

moky

29th November, 2011, 09:36 AM

thx metin !

Morette

29th November, 2011, 11:57 PM

So where do people find the v2 clone?

rossoelab

3rd December, 2011, 12:40 AM

same question ..... where to find the clone?

rog3rio

3rd December, 2011, 01:44 AM

hi
i have this pdfs for clone,have friend sell 1850euros.

z786

3rd December, 2011, 07:59 PM

does the clone read/write rsa proteced edc17 via obd?

tehnosoftex

3rd December, 2011, 09:56 PM

does the clone read/write rsa proteced edc17 via obd?

It reads not by obd2 but boot mode

moky

4th December, 2011, 04:31 PM

yes R/W edc17 without anti tuning..and tricore for protected,please answer only of you have got this hardware...

z786

4th December, 2011, 06:48 PM

so tricore means via obd or manually?

moky

4th December, 2011, 06:56 PM

you can do edc17 no protected by obd (with checksum integrated ) or if protected in mode boot tricore,you have the 2 options

moky

4th December, 2011, 06:57 PM

here list Z

moky

9th December, 2011, 07:50 PM

work fine in tricore boot (tested today)

z786

9th December, 2011, 09:38 PM

wat ecu was it?

moky

9th December, 2011, 09:52 PM

Vag edc17 cp04

sery22

9th December, 2011, 11:17 PM

hello
where do people find the v2 clone?
thanks

rog3rio

10th December, 2011, 04:25 AM

hello
where do people find the v2 clone?
thanks
hi i have friend sell.
contact me in pm if you need.

jjrp255630

10th December, 2011, 10:29 AM

hi, i know where is you can buy it contact me

ERIG

10th December, 2011, 06:58 PM

is posible to read and modifi internal eprom
????
i hawe interest for clone

rog3rio

12th December, 2011, 09:01 PM

hi
Link is offline now.

moky

12th December, 2011, 09:14 PM

best price are possible but interesting link thx

DIFITUNING

13th December, 2011, 12:52 PM

I need urgent thank you very much

VAGR666

17th December, 2011, 01:58 PM

hi
Link is offline now.

up again...

z786

27th December, 2011, 12:28 AM

any seen the new 2012 interface?
onb their webpage they claim to have a new one?

VAGR666

27th December, 2011, 10:50 AM

any seen the new 2012 interface?
onb their webpage they claim to have a new one?

from what i am told, it is not for sale yet...

z786

27th December, 2011, 09:08 PM

but whats the difference on new machine

bazare

28th December, 2011, 01:59 PM

anticlone? :P

VAGR666

28th December, 2011, 03:31 PM

anticlone? :P

probably, but there is also lots of new stuff :)

z786

28th December, 2011, 04:55 PM

thats wat i meant
performance, protocols etc

VAGR666

28th December, 2011, 05:58 PM

NEW JTAG - BDM - MOTOROLA - FREESCALE - INFINEON
Freescale MPC 5553/5554/5565/5566 NEXSUS PORT New IAW MJD 8F2 - Mair 8GMF New Delphy DCM3.5xx DCM3.7xx TRW.
Motorola Freescale MPC 555/556/561/562/563/564/565
Motorola MC 68332 - MC YQQCU - MC 68377 Trionic 5/7/8 GM-OPEL-SAAB

Motorola MC 68376 Campi 01 Lamborghini - Lotus
Motorola MC 68336 MEMS D5 ROVER
Motorola ZC 439615 - ZC 439507 IAW FIAT - VAG
New Line OBD protocols VPM GM
Hummer-Corvette-Munstang-Blazer-Cadilac

New Line OBD protocols Tx - Rx
Subaru - Mitsubischi - Hitachi - Denso ecu

br

z786

29th December, 2011, 12:38 AM

would this do all the jap cars, mazda etc?

powertdi

1st January, 2012, 07:04 PM

Most of japanese car. If you have original tool, You should send itl to Italy,pay 1200eur, And your will got new one FGTECH 2012.
If you have piasini tool maybe you dont need it.

z786

16th January, 2012, 02:36 AM

any updates on this?
any1 have UPDATED car list?

z786

18th January, 2012, 09:16 PM

???????????????????????

VAGR666

19th January, 2012, 02:48 PM

i guess everything is still the same...

z786

20th January, 2012, 03:37 AM

some1 must have a list?

risalelettronic

20th January, 2012, 10:14 PM

if you have the piasini do many more things
Now only do the new 2012 cars and the most common
Instead piasini do older cars and motorcycles which do not do the new 2012

Morette

23rd January, 2012, 04:26 PM

Here is a list, Nov 2011.

z786

23rd January, 2012, 08:56 PM

it says denso but no toyota on list

Morette

23rd January, 2012, 10:04 PM

This is still a few months old, more has been added, and it doesn't include the V2 interface.

z786

24th January, 2012, 03:25 AM

where wud u get updated list

worldiagnostic

26th January, 2012, 02:37 PM

it says denso but no toyota on list
Forget Toyota Denso I would suggest :)

z786

26th January, 2012, 03:52 PM

Forget Toyota Denso I would suggest :)

wat wud u suggest

eprommazza

26th January, 2012, 03:56 PM

hi
this is the list

// BDM MODE

#POWER PC
id=193
[BDM ALL MPC55x/56x] 'BDM' ( READ WRITE MICRO / FLASH / EEPROM )
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#MOTOROLA
id=312
[BDM ALL MC32xxx] 'BDM' ( READ WRITE FLASH 256K/512K/1M)
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS
--- REQUIRED FIRMWARE VERSION 52 ----

#MOTOROLA MPC55xx
id=332
[JTAG ALL MPC55xx] 'BDM' ( READ WRITE MICRO / EEPROM)
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS
--- REQUIRED FIRMWARE VERSION 52 ----

#RENESAS
id=319
[AUD RENESAS SH705x] 'BDM' ( READ MICRO 512K/1M)
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS
--- REQUIRED FIRMWARE VERSION 52 ----

// BOOT MODE

#CSIEMENS_BOOTMODE_200_400
id=94
BOOT SIEMENS 29F200/400BB CRIPT - PIN 28 FLASH TO MASS

#CSIEMENS_BOOTMODE_200_400
id=296
BOOT SIEMENS 29F200/400BB CRIPT - PIN 28 FLASH TO MASS

#CSIEMENS_BOOTMODE_200_400
id=72
BOOT SAGEM2000 29F200/400BB - PIN 28 FLASH TO MASS

#CSIMOS_BOOTMODE_200_400
id=335
BOOT SIMOS 3xx - 7.1 - 9.1 29F400BB - PIN 28 FLASH TO MASS

id=161
[BOOT ST10F168 Micro] 'K-Line' (READ WRITE 320K)

id=244
[BOOT ST10F269 Micro] 'K-Line' (READ WRITE 320K)

id=160
[BOOT ALL ST10F27x Micro] 'K-Line' (READ WRITE 896K)

id=229
[BOOT ALL ST10F27x Micro+Flash] 'K-Line' (READ WRITE 2M)

id=165
[BOOT ST10F280 Micro] 'K-Line' (READ WRITE 576K)

id=243
[BOOT ST10F296 Micro] 'K-Line' (READ WRITE 896K)

id=166
[BOOT ALL ST10F27x Micro] 'CAN-BUS' (READ WRITE 896K)

#RENESAS
id=313
[BOOT RENESAS SH705x] 'Rx-Tx' ( WRITE MICRO 512K/1M)
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS
--- REQUIRED FIRMWARE VERSION 52 ----

#MITSUBISHI
id=343
[BOOT MITSUBISHI MH7202] 'K-Line' (READ/WRITE 128K) - INTERNAL FLASH MICRO -
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS
--- REQUIRED FIRMWARE VERSION 52 ----

#BOOT TRICORE
id=308
[BOOT TRICORE SAK TC-1796] 'BOOT-TRICORE' (READ WRITE -INTERNAL/EXTERNAL FLASH TRICORE + EEPROM)
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=326
[BOOT TRICORE SAK TC-1796] 'BOOT-TRICORE' (READ WRITE -INTERNAL/EXTERNAL FLASH TRICORE + EEPROM)
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=309
[BOOT TRICORE SAK TC-1766] 'BOOT-TRICORE' (READ WRITE -INTERNAL/EXTERNAL FLASH TRICORE + EEPROM)
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=327
[BOOT TRICORE SAK TC-1766] 'BOOT-TRICORE' (READ WRITE -INTERNAL/EXTERNAL FLASH TRICORE + EEPROM)
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=310
[BOOT TRICORE SAK TC-1767] 'BOOT-TRICORE' (READ WRITE -INTERNAL/EXTERNAL FLASH TRICORE + EEPROM)
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=328
[BOOT TRICORE SAK TC-1767] 'BOOT-TRICORE' (READ WRITE -INTERNAL/EXTERNAL FLASH TRICORE + EEPROM)
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=311
[BOOT TRICORE SAK TC-1797] 'BOOT-TRICORE' (READ WRITE -INTERNAL/EXTERNAL FLASH TRICORE + EEPROM)
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=329
[BOOT TRICORE SAK TC-1797] 'BOOT-TRICORE' (READ WRITE -INTERNAL/EXTERNAL FLASH TRICORE + EEPROM)
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=279
[BOOT TRICORE SAK TC-1766/1796] 'BOOT-TRICORE' (READ WRITE 1,5/2M) -INTERNAL TRICORE FLASH-
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=280
[BOOT TRICORE SAK TC-1766/1796] 'BOOT-TRICORE' (READ WRITE 2/4M) -FLASH SPANSION S29CD016 / S29CD032-
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=281
[BOOT TRICORE SAK TC-1766/1796] 'BOOT-TRICORE' (READ WRITE 32/128K) -INTERNAL TRICORE EEPROM-
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=306
[BOOT TRICORE SAK TC-1767] 'BOOT-TRICORE' (READ WRITE 2M) -INTERNAL TRICORE FLASH-
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=307
[BOOT TRICORE SAK TC-1767] 'BOOT-TRICORE' (READ WRITE 64K) -INTERNAL TRICORE EEPROM-
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=331
[BOOT TRICORE PASSWORD TPROT V08] 'BOOT-TRICORE' (READ 24 byte) -INTERNAL PASSWORD-
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI IN BOOT TRICORE USER MANUAL - FOLLOW INSTRUCTION IN BOOT TRICORE USER MANUAL

#AUDIME755, ME71.1, ME715BOOTMODE
id=86
[BOSCH ME7.x.x VAG] 'K-Line' (READ WRITE 1Mb ) -FLASH 29F800BB-

#AUDIME755, ME71.1, ME715BOOTMODE
id=90
[BOSCH ME7.x.x VAG] 'K-Line' (READ WRITE 512Kb ) -FLASH 29F400BB-

#AUDIVW ERASE ERROR GATEWAY VAG
id=149
[TOOLS VAG] 'CAN' ERASE ERROR GATEWAY AFTER WRITE

#AUDIVW ERASE ERROR ECU VAG
id=302
[TOOLS VAG] 'CAN' ERASE ERROR ECU AFTER WRITE

#AUDIVW ABILITA COUNTER EDC16 U1
id=91
[ENABLE SET COUNTER EDC16U1] 'K-Line' (READ WRITE 448Kb) - Micro MPC556 -

#AUDIVW ABILITA COUNTER EDC16 DOUBLE U2/C2
id=122
[ENABLE SET COUNTER DOUBLE EDC16U2/C2] 'K-Line' (READ WRITE 448Kb) - Micro MPC556 -

#AUDIVW ABILITA COUNTER EDC16 U34
id=218
[ENABLE SET COUNTER EDC16U34] 'K-Line' (READ WRITE 2 Mb) -FLASH M58BW016xB-

#AUDIVW ABILITA COUNTER EDC16 CP34
id=240
[ENABLE SET COUNTER EDC16CP34] 'K-Line' (READ WRITE 2 Mb) -FLASH M58BW016xB-

#AUDIVW ABILITA COUNTER EDC16 U34 CAN
id=221
[ENABLE SET COUNTER EDC16U34] 'CAN-BUS' (READ WRITE 2 Mb) -FLASH M58BW016xB-

#AUDIVW ABILITA COUNTER EDC16 CP34 CAN
id=219
[ENABLE SET COUNTER EDC16CP34] 'CAN-BUS' (READ WRITE 2 Mb) -FLASH M58BW016xB-

#AUDIVW ABILITA COUNTER EDC16 CP34 CAN -CRAFTER-
id=272
[ENABLE SET COUNTER EDC16CP34 - CRAFTER] 'CAN-BUS' (READ WRITE 2 Mb) -FLASH M58BW016xB-
--- REQUIRED FIRMWARE VERSION 40 ----

#AUDIVW ABILITA COUNTER DOPPIA EDC16 CP34 CAN
id=220
[ENABLE SET COUNTER DOUBLE EDC16CP34] 'CAN-BUS' (READ WRITE 2 Mb x2) -FLASH M58BW016xB-

#AUDIEDC15P
id=54
[EDC15P+ VAG] 'K-Line' (READ WRITE 512Kb ) -FLASH 29F400BT-

#AUDIEDC15VP40_29F400
id=68
[EDC15VP40 V6 VAG] 'K-Line' (READ WRITE 512 Kb) -FLASH 29F400BT-

#AUDIEDC15VP40_29F800
id=89
[EDC15VP40+ V6 VAG] 'K-Line' (READ WRITE 1 Mb) -FLASH 29F800BT- CHECK VOLTAGE BATTERY

#VWEDC15V
id=55
[EDC15V VAG] 'K-Line' (READ WRITE 512 Kb) -FLASH 29F400BT-

#VWEDC15Pa
id=63
' BASSA VELOCITA / SLOW SPEED '
[EDC15P+ VAG] 'K-Line' (READ WRITE 512 Kb) -FLASH 29F400BT-

// EDC16

#AUDIVWEDC16U1
id=102
[AUDI VW SEAT SKODA EDC16 U1] 'K-Line' (READ WRITE 1Mb) -FLASH 29F802CB-

#CAUDIVWEDC16_U1_CAN
id=180
[AUDI VW SEAT SKODA EDC16 U1] 'CAN BUS' (READ WRITE 1 Mb) -FLASH 29BL802CB- CHECK VOLTAGE BATTERY

#AUDIVWEDC16U31_4C
id=133
[EDC16U3x VAG] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CAUDIVWEDC16_U3x_CAN
id=196
[EDC16U3x VAG] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB -

#AUDIVWEDC16 CP34
id=125
[EDC16CP34 VAG] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB- CHECK VOLTAGE BATTERY

#AUDIVWEDC16 CP34
id=175
[EDC16CP34 VAG] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB- CHECK VOLTAGE BATTERY

#AUDIVWEDC16 CP34
id=271
[EDC16CP34 VAG] 'CAN BUS' (READ WRITE 2Mb) -FLASH S29CD016GxP- CHECK VOLTAGE BATTERY
--- REQUIRED FIRMWARE VERSION 39 ----

#CAUDIVWEDC16C2_4_DOPPIA
id=202
[EDC16C2_4 V10 VAG 2 ECU] 'K-Line' (READ WRITE 2 ECUS 1Mb X2) -FLASH 29BL802CB- CHECK VOLTAGE BATTERY

#CAUDIVWEDC16C2_4_DOPPIA
id=203
[EDC16C2_4 V10 VAG 2 ECU] 'K-Line' (READ WRITE 2 ECUS 1Mb X2) -FLASH 29BL802CB- CHECK VOLTAGE BATTERY

#CAUDIVWEDC16CP34_V8_CAN
id=24
[EDC16C4 V8 VAG 2 ECU] 'CAN BUS' (READ WRITE 2 ECUS 2Mb X2) -FLASH M58BW016xB- CHECK VOLTAGE BATTERY

// BENZINA

#AUDIME7.5.5
id=66
[BOSCH ME7.5.5 VAG] 'K-Line' (READ WRITE 1Mb ) -FLASH 29F800BB- CHECK VOLTAGE BATTERY

#CAUDIME751_400
id=88
[BOSCH ME7.5.1 VAG] 'K-Line' (READ WRITE 512Kb ) -FLASH 29F400BB- CHECK VOLTAGE BATTERY

#CAUDIVW_MED9510
id=178
[BOSCH MED 9.5.10 VAG] 'K-Line' (READ WRITE 2 Mb) -FLASH M58BW016xB- CHECK VOLTAGE BATTERY

#CAUDIVW_MED9510
id=179
[BOSCH MED 9.5.10 VAG] 'CAN BUS' (READ WRITE 2 Mb) -FLASH M58BW016xB- CHECK VOLTAGE BATTERY
--- REQUIRED FIRMWARE VERSION 47 ----

#CAUDIVW_MED91
id=183
[BOSCH MED 9.1 VAG] 'CAN BUS' (READ WRITE 2 Mb) -FLASH M58BW016xB- CHECK VOLTAGE BATTERY
--- REQUIRED FIRMWARE VERSION 47 ----

#CAUDIVW_MED91
id=147
[BOSCH MED 9.1 VAG] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB- CHECK VOLTAGE BATTERY
--- REQUIRED FIRMWARE VERSION 47 ----

#CAUDIVWMED9.1_V10_DOPPIA
id=148
[MED9.1 V8/V10 FSI 2 ECU] 'CAN BUS' (READ WRITE 2 ECUS 2Mb X2) -FLASH M58BW016xB- CHECK VOLTAGE BATTERY
--- REQUIRED FIRMWARE VERSION 47 ----

#AUDIME7.1 V6
id=45
[BOSCH ME7.1 VAG] 'K-Line' (READ WRITE 1Mb ) -FLASH 29F800BB- CHECK VOLTAGE BATTERY

#AUDIME7.1.1 V6
id=128
[BOSCH ME7.1.1 VAG] 'K-Line' (READ WRITE 1Mb ) -FLASH 29F800BB- CHECK VOLTAGE BATTERY

#AUDIME7.1.1 V6 CAN
id=238
[BOSCH ME7.1.1 VAG] 'CAN BUS' (READ WRITE 1Mb ) -FLASH 29F800BB- CHECK VOLTAGE BATTERY

#CAUDIVW_IAW_MV
id=27
[MARELLI IAW MV] 'K-LINE' (READ WRITE 512Kb) -FLASH 29F400BB-

#CAUDIVW_IAW_HV
id=247
[MARELLI IAW 4HV] 'K-LINE' (READ WRITE 896Kb) -MICRO ST10F296-

#AUDI SIEMENS PPD1
id=209
[SIEMENS PPD1 VAG] 'K-Line' (READ WRITE 2Mb ) -FLASH M58BW016xB-

#AUDI SIEMENS PPD1
id=84
[SIEMENS PPD1 VAG] 'CAN BUS' (READ WRITE 2Mb ) -FLASH M58BW016xB-

#AUDI SIMOS 6.2/6.3
id=268
[SIMOS 6.2/6.3 VAG] 'CAN BUS' (READ WRITE 2Mb ) -FLASH M58BW016xB-

#AUDI SIMOS 3 / 9.1
id=334
[SIMOS 3 / 9.1 VAG] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB-

//TRICORE

#VW EDC17CP14
id=249
[BOSCH EDC17CP04_14 VAG] 'CAN BUS' (READ WRITE 2Mb ) -INT FLASH TRICORE / FLASH S29CD0xxGB-

#VW EDC17CP14
id=250
[BOSCH EDC17CP04_14 VAG] 'CAN BUS' (READ WRITE 2Mb ) -INT FLASH TRICORE / FLASH S29CD0xxGB-

#AUDI MED17
id=245
[BOSCH MED17 VAG] 'CAN BUS' (READ WRITE 2Mb ) -INT FLASH TRICORE / FLASH S29CD0xxGB-

#AUDI MED17
id=269
[BOSCH MED17 VAG] 'CAN BUS' (READ WRITE 2Mb ) -INT FLASH TRICORE / FLASH S29CD0xxGB-

#BMW330D
id=0
[BMW BOSCH DDE4] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#BMW320D
id=9
[BMW BOSCH DDE3] 'K-Line' (READ WRITE 256Kb) -FLASH 2 X 29F010-

#BMW318M52
id=8
[BMW BOSCH DME M5.2] 'K-Line' (READ WRITE 16Kb) -FLASH CC460-

#BMW318BMS46
id=17
[BMW BOSCH BMS46] 'K-Line' (READ WRITE3 2Kb) -FLASH 29F200BB-

#BMW318M52
id=126
[BMW BOSCH M5.2.1] 'K-Line' (READ WRITE3 2Kb) -FLASH 29F200BB-

#BMWMSS50M3E36
id=2
[BMW SIEMENS MSS50] 'K-Line' (READ WRITE 32Kb) -FLASH 2 X 28F200BxB-

#BMWMSS52M3E46
id=1
[BMW SIEMENS MSS52] 'K-Line' (READ WRITE 32Kb) -FLASH 2 X 29F200BB-

#BMWMSS53E46CSL
id=44
[BMW SIEMENS MSS54] 'K-Line' (READ WRITE 64Kb) -FLASH 2 X 29F400BB-

#BMWMINI90_110_S VDO_SIEMENS 2 DRIVERS IN 1
id=3
[BMW SIEMENS / VDO_SIEMENS E3 E4 ] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB-

#BMWMS41
id=5
[BMW SIEMENS MS41] 'K-Line' (READ WRITE 16Kb) -FLASH 28F200BB-

#BMWMS42
id=6
[BMW SIEMENS MS42] 'K-Line' (READ WRITE 32Kb) -FLASH 29F400BB-

#BMWMS43
id=7
[BMW SIEMENS MS43] 'K-Line' (READ WRITE 32Kb) -FLASH 29F400BB 32Kb-

#BMW_EDC16C31
id=23
[BMW BOSCH EDC16C31] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW_EDC16C35
id=237
[BMW BOSCH EDC16C35/CP35] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW_EDC16C35_CAN
id=236
[BMW BOSCH EDC16C35/CP35] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW_EDC17_CAN
id=158
[BMW BOSCH EDC17 CP02/C06] 'CAN BUS' (READ WRITE 2Mb) -INT FLASH TRICORE-
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW_MINI_MED17_CAN
id=298
[BMW-MINI BOSCH MED172/MEV172] 'CAN-BUS' (READ WRITE 2Mb) -INT FLASH TRICORE / FLASH S29CD0xxGB-
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW_MSS60/65_CAN
id=211
[BMW BOSCH MSS60/65] 'CAN BUS' (READ WRITE 128Kb/5Mb) - 2 x Micro MPC563+Flash -
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW_MSV70/MSS70
id=299
[BMW BOSCH MSV70/MSS70] 'K-Line' (READ WRITE 2,5Mb/128Kb) - Micro MPC563 + FLASH AM29BDD160GB -
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW_MSD80
id=235
[BMW BOSCH MSD80] 'K-LINE' (READ WRITE 2Mb) -INT FLASH TRICORE-
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW_MSD80_CAN
id=301
[BMW BOSCH MSD80] 'CAN BUS' (READ WRITE 2Mb) -INT FLASH TRICORE-
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW318ME9
id=48
[BMW BOSCH ME9] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-

#BMWMODULOTV
id=76
ATTIVAZIONE MODULO TV

#BMWME71
id=79
[BMW BOSCH ME7.1] 'K-Line' (READ WRITE 64Kb) -FLASH 29F400BB-

#CHEVROLET_SIRIUS_5WY
id=169
[CHEVROLET SIEMENS SIRIUS 5WY] 'K-Line' (READ WRITE 32Kb) -FLASH 29F400BB-

#CHEVROLET_EDC16C39
id=207
[CHEVROLET BOSCH EDC16C39] 'CAN-BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CHRYSLEREDC15C2
id=65
[CHRYSLER EDC15C2] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#CHRYSLEREDC16C299
id=210
[CHRYSLER EDC16C2.9.9] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-

#CHRYSLEREDC16C2
id=278
[CHRYSLER EDC16C2] 'CAN BUS' (READ WRITE 1Mb) -FLASH 29BL802CB-

#CCITROEN_DELPHI_16
id=95
[DELPHI DELCO PSA] 'K-Line' (READ WRITE 448Kb) -FLASH MPC555-

#CCITROEN_DELPHI_DCM34
id=113
[DELPHI DELCO DCM 3.4 PSA] 'K-Line' (READ WRITE 1Mb)

#CCITROEN_DELPHI_DCM34_CAN
id=141
[DELPHI DELCO DCM 3.4 PSA] 'CAN BUS' (READ WRITE 1Mb)

#CCITROEN_DELPHI_DCM35_CAN
id=336
[DELPHI DCM 3.5 PSA] 'CAN BUS' (READ WRITE 3Mb) -MICRO MPC 5566-

#CCITROEN_VISTEON_DCU102
id=226
[VISTEON DCU102 PSA] 'K-Line' (WRITE 896Kb) -MICRO ST10F276-

#CORVETTE_DELPHY_E5
id=253
[DELPHY LS3] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-
--- REQUIRED FIRMWARE VERSION 35 ----

#HUMMER_DELPHY_E5
id=267
[DELPHY LH8] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-
--- REQUIRED FIRMWARE VERSION 35 ----

#CORVETTE_DELPHY_E4
id=259
[DELPHY LS2] 'CAN BUS' (READ WRITE 1,5Mb) -MICRO ST10 + Flash-
--- REQUIRED FIRMWARE VERSION 35 ----

#CORVETTE_DELPHY_VPWM
id=270
[DELPHY LS1] 'VPWM' (READ WRITE 512kb) -FLASH 28F400-
--- REQUIRED FIRMWARE VERSION 52 ----

#TRAIL BLAZER_DELPHY_VPWM
id=324
[DELPHY P10] 'VPWM' (READ WRITE 512kb) -FLASH 28F400-
--- REQUIRED FIRMWARE VERSION 52 ----

#SILVERADO_DELPHY_VPWM
id=325
[DELPHY P10] 'VPWM' (READ WRITE 512kb) -FLASH 28F400-
--- REQUIRED FIRMWARE VERSION 52 ----

#HUMMER_DELPHY_VPWM
id=320
[DELPHY P12] 'VPWM' (READ WRITE 1Mb) -FLASH MICRO-
--- REQUIRED FIRMWARE VERSION 52 ----

#CDAF_MS62
id=152
[BOSCH MS6.2 DAF ] 'K-Line' (READ WRITE 256Kb) -2 FLASH 29F010-

#CDAF_DELPHY
id=206
[DELPHY DMCI DAF ] 'CAN-BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CDAF_EDC7_Cummins
id=16
[BOSCH EDC7 CUMMINS DAF] 'CAN-BUS' (READ WRITE 456kb) -MICRO MPC555-
--- REQUIRED FIRMWARE VERSION 38 ----

#CDAF_EDC7 C3
id=303
[BOSCH EDC7 C3 Cummins] 'K-Line' (READ WRITE 448Kb) -FLASH MPC555-

#CDEUTZ_EDC16UC40
id=293
[BOSCH EDC16UC40 DEUTZ ] 'K Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CDEUTZ_LC5E
id=305
[ECU DEUTZ ] 'K Line' (READ WRITE 8kb) -EEPROM AT24C64-

#CDODGE_EDC16U31
id=223
[BOSCH EDC16U31 DODGE ] 'CAN-BUS' (VIRTUAL READ - WRITE 2Mb) -FLASH M58BW016xB-

#DUCATI IAW5SM
id=283
[MARELLI IAW 5SM] 'K-Line' (READ WRITE 576Kb) -MICRO ST10F280-

#PIAGGIO MARELLI MIU
id=285
[MARELLI MIU] 'K-Line' (READ WRITE 320Kb) -MICRO ST10F269-

#APRILIA IAW5DM
id=290
[MARELLI IAW 5DM] 'K-Line' (READ WRITE 896Kb) -MICRO ST10F296-

#FERRARIM52
id=34
[BOSCH M5.2 FERRARI ] 'K-Line' (WRITE 128Kb) -FLASH CC460-

#FERRARI360ME7
id=41
[2 ECUS BOSCH ME7.3H4 FERRARI ] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB-

#FERRARI 430 ME7.3.2
id=150
[2ECUS BOSCH ME7.3.2 FERRARI ] 'K-Line' (READ WRITE 1Mb) -FLASH 29F800BB-
[ECU BOSCH MED7.1 MASERATI ] 'K-Line' (READ WRITE 1Mb) -FLASH 29F800BB-

#Fiat/Alfa: m155
id=4
[BOSCH M1.5.5 FIAT/ALFA/LANCIA] 'K-Line' (WRITE 128Kb) -FLASH 29F010- PIN 10 TO 12V ENABLE PROGRAM SEE DOCUMENTS

#Fiat/Alfa/Lancia euro2
id= 13
[BOSCH EDC15 C5 FIAT] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#Fiat/Alfa/Lancia: euro3
id= 22
[BOSCH EDC15 C6/7/9] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#IAW MJD 6J MULTIGET
id=83
[MARELLI IAW MJD FIAT] 'K-Line' (READ WRITE 64/448Kb) -FLASH MPC555-

#CFIAT_IAWMJD6F3_K
id=38
[MARELLI IAW MJD6F3 FIAT] 'K-Line' (READ WRITE 2M/2,5M) -FLASH M58BW016xB-

#CFIAT_IAWMJD6F3_CAN
id=185
[MARELLI IAW MJD6F3 FIAT] 'CAN BUS' (VIRTUAL READ WRITE 64Kb) -FLASH M58BW016xB-

#CFIAT_IAW_5SF3_CAN
id=212
[MARELLI IAW 5SF3 (HW>=300) FIAT] 'CAN BUS' (VIRTUAL READ WRITE 448Kb) -MICRO ST10F280-

#CFIAT_IAW_5SF8_CAN
id=242
[MARELLI IAW 5SF8 FIAT] 'CAN BUS' (WRITE 896Kb) -MICRO ST10F296-

#CFIAT_IAW_8GMF_CAN
id=333
[MARELLI IAW 8GMF FIAT] 'CAN BUS' (WRITE 2Mb) -MICRO MPC5565-
--- REQUIRED FIRMWARE VERSION 52 ----

#CFIAT_IAW_MJ8DF_CAN
id=339
[MARELLI IAW MJ8DF FIAT] 'CAN BUS' (WRITE 2Mb) -MICRO MPC5565-
--- REQUIRED FIRMWARE VERSION 52 ----

#CFIAT_IAW_Injector_CAN
id=340
[FIAT MULTIAIR INJECTOR CODER] 'CAN BUS' (READ WRITE 4Kb)
--- REQUIRED FIRMWARE VERSION 52 ----

#CFIAT_IAW_MJ8DF
id=341
[MARELLI IAW MJ8DF FIAT] 'K-Line' (WRITE 2Mb) -MICRO MPC5565-
--- REQUIRED FIRMWARE VERSION 52 ----

#CFIAT_IAW_Injector
id=342
[FIAT MULTIAIR INJECTOR CODER] 'K-Line' (READ WRITE 4Kb)
--- REQUIRED FIRMWARE VERSION 52 ----

#FIATME7.2.1 EURO3
id=37
[BOSCH ME7 FIAT] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB- BOOT MODE PIN 20 TO MASS

#CALFA_MED711
id=215
[BOSCH MED 7.1.1 ALFA JTS] 'K-LINE' (WRITE 1Mb) -FLASH 29F800BB-
***Read with TOOL BOOT MODE - C167 - BOSCH ME7 1 Micro - Flash 800***

#CALFA_MED761
id=216
[BOSCH MED 7.6.1 ALFA JTS] 'K-LINE' (WRITE 896Kb) -MICRO ST10F275-
***"Read with TOOL BOOT MODE - ST10F273/5/6***

#CALFA_MED762
id=230
[BOSCH MED 7.6.2 ALFA JTS] 'K-LINE' (WRITE 2Mb) -FLASH 29F800BB-
***Read with TOOL BOOT MODE - ST10F273/5/6 BOOT MODE MICRO + FLASH EXT 29F800BB***

#ALFAME21
id=39
[BOSCH ME7 ALFA] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB- BOOT MODE PIN 20 TO MASS

#ALFAME731HA
id=40
[BOSCH ME7.3.1 ALFA E4] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB- BOOT MODE PIN 20 TO MASS

#ALFAM21 28F200BXB
id=53
[BOSCH ME2.1 ALFA] 'K-Line' (READ WRITE 256Kb) -FLASH 28F200BxB- READ BOOT MODE PIN 24 FLASH TO MASS

#FIATIAW 4AF 59F ST10
id=103
[MARELLI IAW 4AF 59F FIAT] 'K-Line' (READ WRITE 320Kb) -FLASH ST10168-

#FIATIAW 4AF 59F
id=106
[MARELLI IAW 4AF 59F FIAT] 'K-Line' (READ WRITE 320Kb) -FLASH ST10168- READ BOOT MODE PIN 104 MICRO TO MASS
DECODIFICA E CLONA TUTTE IAW 4AF/59F -- VEDI PDF IN CARTELLA DOCUMENTI
DECODE END CLONE ALL IAW 4AF/ 59F -- SEE PDF IN FOLDER DOCUMENTS

#IAW 59F / 5NF MOTOROLA
id=120
[MARELLI IAW 49F/4EF/59F/5NF FIAT] 'K-Line' (READ WRITE 256Kb) -MICRO MOTOROLA FLASH 29F200BB-

#FIATEDC16C8
id=50
[EDC16C8 FIAT/ALFA/LANCIA] 'K-Line' (READ WRITE 1Mb) -FLASH 29F802CB-

#FIATEDC16C39
id=132
[EDC16C39 FIAT/ALFA/LANCIA] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CFIAT_EDC16C39_CAN
id=191
[EDC16 C39 FIAT/ALFA/LANCIA] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CFIAT_ME7910_CAN
id=18
[BOSCH ME7 9.10 FIAT/ALFA/LANCIA] 'CAN BUS' (VIRTUAL READ WRITE 896Kb) -MICRO ST10F275-

#CFIAT_ME7910
id=224
[BOSCH ME7 9.10 FIAT/ALFA/LANCIA] 'K-Line' (VIRTUAL READ WRITE 896Kb) -MICRO ST10F275-

#CFIAT_MED17
id=251
[BOSCH MED17.31 FIAT/ALFA/LANCIA] 'K-Line' (VIRTUAL READ WRITE 2Mb) -MICRO TRICORE TC1766-

#FORD_EDC16C3
id=195
[EDC16C3 FORD] 'CAN BUS' (READ WRITE 1Mb) -FLASH 29F802CB -

#FORD_EDC16C34
id=304
[EDC16C34 FORD] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#FORD_EDC16CP39
id=263
[BOSCH EDC16CP39 FORD/LAND ROVER] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#FORD_DELPHY_DCM3.5
id=337
[DELPHY DCM 3.5 FORD] 'CAN BUS' (WRITE 3Mb) -MICRO MPC 5566-

#CFORD_SID202_CAN
id=194
[SIEMENS SID202 FORD] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CFORD_SID206_CAN Focus2000
id=214
[SIEMENS SID206 FORD] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CFORD_SID206_CAN NewFiesta1400
id=231
[SIEMENS SID206 FORD] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CFORD_SID803_CAN
id=144
[SIEMENS SID803 FORD] 'CAN BUS' (READ WRITE 448Kb)

#CFORD_SID803A_CAN
id=42
[SIEMENS SID803A FORD] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CFORD_SID802_CAN
id=190
[SIEMENS SID 802/804 FORD] 'CAN BUS' (READ WRITE 512Kb) -FLASH 29F400BB-

#CFORD_SIM 22_CAN
id=61
[SIEMENS SIM 22] 'CAN BUS' (READ WRITE 512Kb) -FLASH 29F400BB

#CFORD_EMS200_CAN
id=232
[SIEMENS EMS 200] 'CAN BUS' (READ WRITE 512Kb) -FLASH 29F400BB

#FORD_ME90 2,5 20V
id=136
[ME90 FORD] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-
PROGRAMMARE UNA VOLTA IN BDM PRIMA DI SCRIVERE FILE MODIFICATO
PROGRAMME ONCE IN BDM MODE BEFORE MODIFIED FILE WRITING

#CFORDELPHY_FOMOCO_CAN
id=87
[FoMoCo FORD] 'CAN BUS' (READ WRITE 896Kb) -ST10F276-

#CFORDELPHY_TDI_J1850
id=187
[VISTEON TDI EEC-V FORD *PWM*] '* P.W.M.*' (READ WRITE 256/320/448Kb) -FLASH 28F200BXB / ST10Fxx / MPC555-

#CFORDELPHY_EEC5_J1850
id=189
[VISTEON EEC-V FORD *PWM*] '* P.W.M.*' (READ WRITE 128Kb) -FLASH xxxx-

#HONDA_EDC16C31
id=156
[BOSCH EDC16C31 HONDA] 'K-Line' (READ WRITE 2Mb) -FLASH 29F802CB-

#ISUZU_TRANSTRON
id=286
[TRANSTRON ISUZU ] 'CAN BUS' (READ WRITE 1Mb) -MICRO RENESAS-

#IVECO_MS63_200
id=143
[BOSCH MS6.3/4 IVECO ] 'K-Line' (READ WRITE 256Kb) -FLASH 29F400BT-

#IVECO_EDC7
id=51
[BOSCH EDC7C1 IVECO ] 'K-Line' (READ WRITE 64Kb) -FLASH MPC555-

#CIVECO_EDC7UC31
id=60
[BOSCH EDC7 UC31 IVECO ] 'K-Line' (READ WRITE 64Kb) -FLASH M58BW016xB-

#CIVECO_MS62
id=97
[BOSCH MS6.2 IVECO ] 'K-Line' (READ WRITE 32Kb) -2 FLASH 29F010-

#IVECO_EDC16 C8
id=99
[BOSCH EDC16C8 IVECO ] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-

#IVECO_EDC16 C39_5
id=173
[BOSCH EDC16C39 IVECO ] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#JAGUAR SID 201 CAN
id=225
[SIEMENS SID201] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#JHON DEERE L6
id=265
[JOHN DEERE L4/L6] 'CAN BUS' (READ WRITE 32Kb) -2 FLASH 29F010-
--- REQUIRED FIRMWARE VERSION 35 ----

#JHON DEERE L11
id=252
[JOHN DEERE L9/L11/L12] 'CAN BUS' (READ WRITE 32Kb) -MICRO ST10-
--- REQUIRED FIRMWARE VERSION 35 ----

#JHON DEERE L14
id=246
[JOHN DEERE L14] 'CAN BUS' (READ WRITE 512Kb) -MICRO MPC564-
--- REQUIRED FIRMWARE VERSION 35 ----

#JHON DEERE L14 INJECTOR
id=260
[JOHN DEERE L14 GEAR/INJECTOR CODER] 'CAN BUS' (READ WRITE 64Kb)
--- REQUIRED FIRMWARE VERSION 35 ----

#JHON DEERE L16
id=261
[JOHN DEERE L16] 'CAN BUS' (READ WRITE 896Kb) -MICRO ST10F275-
--- REQUIRED FIRMWARE VERSION 35 ----

#JHON DEERE L16 INJECTOR
id=264
[JOHN DEERE L16 GEAR/INJECTOR CODER] 'CAN BUS' (READ WRITE 64Kb)
--- REQUIRED FIRMWARE VERSION 35 ----

#CLAAS L16
id=323
[CLAAS L16] 'CAN BUS' (READ WRITE 896Kb) -MICRO ST10F275-
--- REQUIRED FIRMWARE VERSION 35 ----

#CLAAS L16 INJECTOR
id=322
[CLAAS L16 GEAR/INJECTOR CODER] 'CAN BUS' (READ WRITE 64Kb)
--- REQUIRED FIRMWARE VERSION 35 ----

#KIA DELPHI DDCR E3
id=119
[DELPHI DDCR E3 KIA] 'K-Line' (READ WRITE 40Kb/256Kb) -FLASH 29F200BB-

#KIA DELPHI DDCR - BOOTMODE
id=167
[DELPHI DDCR E3] 'K-Line' (READ WRITE 256Kb) -FLASH 29F200BB-

#KIA DELPHI DCM 32
id=140
[DELPHI DCM32 E4 KIA] 'CAN BUS' ( VIRTUAL READ WRITE 2,5 Mb) -FLASH M58BW016xB-

#KIA_EDC16+c39
id=145
[BOSCH EDC16 C39 KIA] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#KIA_EDC17
id=277
[BOSCH EDC17 KIA] 'CAN BUS' (VIRTUAL READ - WRITE 2Mb) -INT FLASH TRICORE-

#HYUNDAI_EDC17
id=321
[BOSCH EDC17 HYUNDAI] 'CAN BUS' (VIRTUAL READ - WRITE 1,5Mb) -INT FLASH TRICORE-

#MAN_EDC7 C3
id=139
[BOSCH EDC7 C3 MAN] 'K-Line' (READ WRITE 448Kb) -FLASH MPC555-

#MAN_EDC7 C32+
id=201
[BOSCH EDC7 C32+ MAN] 'K-Line' (READ WRITE 2Mb)

#MAN_MS6.1
id=151
[BOSCH MS6.1 MAN] 'K-Line' (READ WRITE 256Kb) -FLASH 29F200BT-

#MAN_MS6.4
id=157
[BOSCH MS6.4 MAN] 'K-Line' (READ WRITE 256Kb) -FLASH 29F200BT-

#MASSEY_FERGUSON_SISU_EDC7UC31
id=291
[BOSCH EDC7UC31] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#MASSEY_FERGUSON_SISU_EDC7UC31
id=292
[BOSCH EDC7UC31] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#MERCEDESEDC15C5
id=58
[BOSCH EDC16C5 MERCEDES] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#MERCEDESEDC15C6
id=59
[BOSCH EDC16C6 MERCEDES] 'K-Line' (READ WRITE 1Mb) -FLASH 29F800BT-

#MERCEDES ACTROS BOOT 200
id=142
[TEMIC TRACK MERCEDES] 'K-Line' (READ WRITE 256Kb) -FLASH 29F200- BOOT MODE SEE DOCUMENTS

#MERCEDES ACTROS BOOT 400
id=155
[TEMIC TRACK MERCEDES] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400- BOOT MODE SEE DOCUMENTS

#MERCEDES EDC16+ C31 C32
id=177
[BOSCH EDC16+ C31 C32 MERCEDES] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#MERCEDES EDC16 C2_7 29BL802CB
id=121
[BOSCH EDC16 C2/4/7 MERCEDES] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-

#MERCEDES EDC16CP31
id=222
[BOSCH EDC16+ CP31 ] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#MERCEDES EDC16CP31 CAN
id=176
[BOSCH EDC16+ CP31 ] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#MERCEDESME728
id=70
[BOSCH ME7.2.7/8 MERCEDES] 'K-Line' (READ WRITE 512b) -FLASH 29F400BB- READ BOOT MODE PIN 24 FLASH TO MASS

#MERCEDESME728AMG
id=77
[BOSCH ME7.2.7/8 AMG MERCEDES] 'K-Line' (READ WRITE 512b) -FLASH 29F400BB- READ BOOT MODE PIN 24 FLASH TO MASS

#MERCEDESME21
id=78
[BOSCH ME2.1MERCEDES] 'K-Line' (READ WRITE 256Kb) -FLASH 28F200BB- PIN B3 TO 12V ENABLE PROGRAM

#MERCEDES_SIEMENS_5WK9_SIM4LE
id=100
[SIEMENS SIM4LE MERCEDES] 'K-Line' (READ WRITE 141Kb) -FLASH 29F400BB-

#MERCEDES_SIEMENS_SIM4LKE
id=172
[SIEMENS SIM4LE MERCEDES] 'K-Line' (READ WRITE 320Kb) -FLASH 29F800BB-

#MERCEDES_SIEMENS_SIM266
id=255
[SIEMENS SIM266 MERCEDES] 'CAN BUS' (WRITE 2Mb) -FLASH AM29BDD160GB-

#NISSANEDC15C2
id=62
[BOSCH EDC15C2 NISSAN] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#OPEL17DTI16V_1
id=10
[DELPHI DELCO Y17L ECM EURO2] 'K-Line' (READ WRITE 208Kb) -FLASH 29F200BB- CHECK VOLTAGE BATTERY

#OPEL17DTI16V_2
id=12
[DELPHI DELCO Y17L ECM EURO3] 'K-Line' (READ WRITE 256Kb) -FLASH 29F200BB- CHECK VOLTAGE BATTERY

#OPEL17DTI16V_3
id=110
[DELPHI DELCO Y17L ECM EURO4] 'K-Line' (READ WRITE 256Kb) -FLASH 29F200BB- CHECK VOLTAGE BATTERY

#OPELEDC15M
id=21
[BOSCH EDC 15M OPEL EURO2] 'K-Line' (WRITE 256Kb) -FLASH 29F200BB / 2 PLCC 29F010- CHECK VOLTAGE BATTERY

#OPELEDC15C7 euro3
id= 294
[BOSCH EDC15 C7] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#OPEL2200DTR
id=71
[BOSCH EDC16VM IBRIDA SU POMPA OPEL EURO 3] 'K-Line' (WRITE 1Mb) -FLASH 29BL802CB-

#OPEL_IAW_MJD
id=104
[MARELLI IAW MJD OPEL EURO 3] 'K-Line' (READ WRITE 448Kb / 64Kb) -FLASH MPC555- CHECK VOLTAGE BATTERY

#COPEL_IAW_MJD+6F3_K
id=241
[MARELLI IAW MJD+ 6F3 OPEL] 'K-Line' (READ WRITE 2M/2,5M) -FLASH M58BW016xB-

#COPEL_IAW_MJD+6F3_Can TAB
id=257
[MARELLI IAW MJD+ 6F3 OPEL] 'CAN BUS' (READ WRITE 2M) -FLASH M58BW016xB-

#COPEL_IAW_MJD+6F3_Can INTERA
id=248
[MARELLI IAW MJD+ 6F3 OPEL] 'CAN BUS' (READ WRITE 2M) -FLASH M58BW016xB-

#COPEL_EDC16C9_CAN
id=184
[BOSCH EDC16_C3 OPEL EURO 4] 'CAN BUS' (WRITE 1Mb) -FLASH 29BL802CB-

#COPEL_EDC16C39_CAN
id=162
[BOSCH EDC16_C39 OPEL] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#COPEL_ME762_CAN
id=186
[BOSCH ME762 OPEL] 'CAN BUS' (READ WRITE 832K)

#OPELM155E3
id=15
[BOSCH M1.5.5 EURO 3] 'K-Line' (READ WRITE 128Kb) -FLASH 29F010- CHECK VOLTAGE BATTERY

#OPELME155E4
id=14
[BOSCH ME1.5.5 OPEL EURO4] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB- CHECK VOLTAGE BATTERY

#OPELME761E4
id=254
[BOSCH ME7.6.1 OPEL EURO4] 'K-Line' (READ WRITE 1Mb) -FLASH 29F800BB- CHECK VOLTAGE BATTERY

#OPELDELCO_1
id=35
[DELPHI DELCO 1.4/1.6 16V ECM EURO 2] 'K-Line' (WRITE 128Kb) -FLASH 29F010 PLCC-

#OPELDELCO_2
id=31
[DELPHI DELCO 1.4/1.6 16V ECM EURO 3] 'K-Line' (READ WRITE 88Kb) -FLASH 29F010-

#OPELDELCO_3
id=30
[DELPHI DELCO 1.4/1.6 16V ECM EURO 4] 'K-Line' (READ WRITE 256Kb) -FLASH 29F200BB-

#OPEL DELCO Z22SE
id=32
[DELPHI DELCO 2.2 OPEL] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB-

#OPELSIMTEC56
id=73
[SIEMENS SIMTEC 56 EURO 2] 'K-Line' (READ WRITE 64Kb) -FLASH 29F010-

#OPELSIMTEC70
id=29
[SIEMENS SIMTEC 90 EURO 3] 'K-Line' (READ WRITE 112Kb) -FLASH 29F010-

#OPELSIMTEC90
id=52
[SIEMENS SIMTEC 90 EURO 4] 'K-Line' (READ WRITE 24Kb) -FLASH 29F010-

#PEUGEOTEDC15C2
id=19
[BOSCH EDC15Cx EURO 3] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#PEUGEOT SID 801/4
id=81
[SIEMENS SID 801/2/4] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB- READ BOOT MODE PIN 28 FLASH TO MASS

#PEUGEOT SID 806
id=228
[SIEMENS SID 806] 'CAN-BUS' (WRITE 512Kb) -FLASH 29F400BB- READ BOOT MODE PIN 28 FLASH TO MASS

#PEUGEOT SID 803 2000cc 16V 29BL802CB
id=129
[SIEMENS SID 803 EURO 3] 'K-Line' (WRITE 448Kb) -FLASH 29BL802CB- READ BDM

#PEUGEOT SID 803A 2000cc 16V M58BW016xB
id=146
[SIEMENS SID 803A EURO 4] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#PEUGEOT SID 803A CAN M58BW016xB
id=114
[SIEMENS SID 803A EURO 4] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#PEUGEOT SID 803A CAN M58BW016xB
id=234
[SIEMENS SID 201 EURO 4] 'CAN BUS' (WRITE 2Mb) -FLASH M58BW016xB- READ BDM

#PEUGEOT SID 201 M58BW016xB
id=101
[SIEMENS SID 201 EURO 4] 'K-LINE' (WRITE 2Mb) -FLASH M58BW016xB- READ BDM

#CPEUGEOTSDI_BOOTMODE400 881/801/804/806 1400cc ,2000CC
id=94
[SIEMENS SID 881/801/804/806] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB- READ WRITE BOOT MODE PIN 28 FLASH TO MASS

#PEUGEOT_EDC16C3/9 1,4 1,6 16V
id=96
[BOSCH EDC16 C0/8 C3/9 EURO 3] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-

#PEUGEOT_EDC16 C34 1,4 1,6 16V
id=130
[BOSCH EDC16 C34/C39 EURO 4/5 FAP] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#PEUGEOT_EDC16C34_CAN 1,4 1,6 16V
id=26
[BOSCH EDC16C34/C39 EURO 4/5 FAP] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#PEUGEOT_EDC16C39 // tipo MITSUBISHI
id=64
[BOSCH EDC16C39 EURO 5 FAP] 'K-LINE' (READ WRITE 2Mb) -FLASH M58BW016xB-

#PEUGEOT_EDC16C39_CAN // tipo MITSUBISHI
id=75
[BOSCH EDC16C39 EURO 5 FAP] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CPEUGEOT_MED17_CAN SAK 1796
id=49
[BOSCH MEx17 E4 PSA] 'CAN BUS' (READ WRITE 2Mb) -FLASH CD032GORFAN01-

#CPEUGEOT_MED17_CAN SAK 1796
id=314
[BOSCH MEx17 E5 PSA] 'CAN BUS' (WRITE 2Mb) -INTERNAL FLASH TRICORE-

#PEUGEOTME744
id=33
[BOSCH PSA ME7.4.4 EURO 3] 'K-Line' (READ WRITE 64Kb) -FLASH 29F400BB-

#PEUGEOTME745
id=138
[BOSCH PSA ME7.4.5 EURO 4] 'K-Line' (READ WRITE 128Kb) -FLASH ST10F275-

#CPEUGEOT_ME745_CAN
id=67
[BOSCH ME7.4.5 EURO 4] 'CAN BUS' (READ WRITE 128Kb) -FLASH ST10F275-

#PEUGEOTME795
id=275
[BOSCH PSA-TOYOTA ME7.9.5 EURO 4] 'K-Line' (WRITE 896Kb) -FLASH ST10F276-

#PEUGEOTIAW48P
id=43
[MARELLI IAW 48P] 'K-Line' (WRITE 256Kb) -FLASH 29F200BB-

#PEUGEOTIAW48P2
id=80
[MARELLI IAW 48P2] 'K-Line' (READ WRITE 64Kb) -FLASH 29F400BB-

#PEUGEOTIAW6LPA01_20
id=82
[MARELLI IAW 6LP01] 'K-Line' (READ WRITE 64Kb/ 448-480Kb) -FLASH ST10F275-

#PEUGEOTIAW6KPB
id=316
[MARELLI IAW 6KPB] 'K-Line' (WRITE 128Kb/ 896Kb) -FLASH ST10F296-

#PEUGEOTIAW6KPB_CAN
id=317
[MARELLI IAW 6KPB] 'CAN BUS' (WRITE 128Kb/ 896Kb) -FLASH ST10F296-

#PEUGEOT_VALEO_JOHNSON
id=233
[PSA VALEO JOHNSON] 'K-Line' (READ WRITE 576Kb)
--- SE NON COMUNICA COLLEGARE LINEA K A PIN B1 (presa grande ECU) ---
--- IF WAKE ERROR CONNECT K-LINE TO PIN B1 (big plug ECU) ---

#PEUGEOT_VALEO_JOHNSON CAN
id=274
[PSA VALEO JOHNSON] 'CAN BUS' (READ WRITE 576Kb)
--- SE NON COMUNICA COLLEGARE LINEA K A PIN B1 (presa grande ECU) E USA DRIVER K ---
--- IF WAKE ERROR CONNECT K-LINE TO PIN B1 (big plug ECU) AND USE K-LINE DRIVER ---

#PEUGEOT_SAGEM2000_14_E3
id=118
[SAGEM 2000 PEUGEOT E3] 'K-Line' (READ WRITE 32Kb) -FLASH 29F200BB-

#PEUGEOT_SAGEM2000_14_E4
id=112
[SAGEM 2000 PEUGEOT E4] 'K-Line' (READ WRITE 64Kb) -FLASH 29F400BB-

#PORSCHE CLEAR ERROR K-LINE
id=204
[BOSCH ME7.1.1 PORSCHE] 'K-Line' CLEAR ERROR AFTER WRITE FOR ME7.1.1 (CAYENNE)

#PORSCHE996_CC460
id=115
[BOSCH M5.2 PORSCHE] 'K-Line' (READ WRITE 16Kb) -FLASH CC460-

#PORSCHE_ME72_400
id=124
[BOSCH ME7.2 PORSCHE] 'K-Line' (BOOT READ WRITE 512Kb) -FLASH 29F400BB-

#PORSCHE_ME784_800
id=154
[BOSCH ME7.8.4 PORSCHE] 'K-Line' (BOOT READ WRITE 1Mb) -FLASH 29F800BB-

#PORSCHE_ME7.1.1_800 TURBO
id=127
[BOSCH ME7.1.1 PORSCHE] 'K-Line' (READ WRITE 1Mb) -FLASH 29F800BB-

#PORSCHE_ME7.1.1_800 ASP
id=273
[BOSCH ME7.1.1 PORSCHE] 'K-Line' (READ WRITE 1Mb) -FLASH 29F800BB-

#RENAULT DELPHIJTD
id=28
[DELPHI DELCO DDCR NISSAN/RENAULT] 'K-Line' (READ WRITE 40Kb) -FLASH 29F200BB-

#RENAULT DELPHIJTD E4
id=98
[DELPHI DELCO DDCR NISSAN/RENAULT] 'K-Line' (READ WRITE 128Kb) -FLASH ST10F275-

#CRENAULT_DELPHY_E4_dCi_CAN
id=123
[DELPHI DELCO DDCR NISSAN/RENAULT] 'CAN BUS' (READ WRITE 128Kb) -FLASH ST10F275-

#CRENAULT_DENSO_DH5
id=116
[DENSO DH5 RENAULT] 'K-Line' (READ WRITE 224Kb) -FLASH 29F400BB-

RENAULT_SID301
id=109
[SIEMENS SID 301 RENAUT] 'CAN-BUS' (READ WRITE 2Mb) -FLASH AM29BDD160-

#CRENAULT_EDC16C3_INJECTOR_CAN
id=181
[INJECTOR CODE BOSCH EDC16 C3 EURO 3] 'CAN BUS' (READ WRITE) -95C040-

#RENAULT_EDC16C3
id=117
[BOSCH EDC16C3-9 EURO 3] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-
ATTENZIONE!!! LETTURA & SCRITTURA ABILITATE PER TEMPERATURA MOTORE MINORE DI 50?C
LEGGERE GLI INIETTORI CON "INJECTOR CODER" PRIMA DI SCRIVERE
ATTENTION!!! READ & WRITE OPERATIONS AVAILABLE FOR ENGINE TEMPERATURE LESS THAN 50?C
READ INJECTOR WHIT "INJECTOR CODER" BEFORE WRITE

#RENAULT_EDC16CP33
id=171
[BOSCH EDC16CP33 OPEL / RENAULT EURO 4] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-
PER RENAULT MASCOTT --> VEDERE PLUG DIAGNOSE PDF - SEE PDF PLUG DIAGNOSE
ATTENZIONE!!! PER AUTO CON CHIAVE INTELLIGENTE INSERIRE COMUNQUE LA CHIAVE NEL PIANTONE
ATTENTION!!! IN CAR WITH INTELLIGENT KEY INSERT KEY IN THE DASHBOARD ANYWAY

#CRENAULT_EDC16CP33_C36_CAN
id=182
[BOSCH EDC16CP33 OPEL / RENAULT EURO 4] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-
[BOSCH EDC16C3-9 EURO 3] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-
ATTENZIONE!!! LETTURA & SCRITTURA ABILITATE PER TEMPERATURA MOTORE MINORE DI 50?C
ATTENTION!!! READ & WRITE OPERATIONS AVAILABLE FOR ENGINE TEMPERATURE LESS THAN 50?C
ATTENZIONE!!! PER AUTO CON CHIAVE INTELLIGENTE INSERIRE COMUNQUE LA CHIAVE NEL PIANTONE
ATTENTION!!! IN CAR WITH INTELLIGENT KEY INSERT KEY IN THE DASHBOARD ANYWAY

#RENAULTSIRIUS32
id=11
[SIEMENS SIRIUS 32 RENAULT] 'K-Line' (READ WRITE 32Kb) -FLASH 29F200BB-

#RENAULTSIRIUS34
id=107
[SIEMENS SIRIUS 34 RENAULT] 'K-Line' (READ WRITE 32Kb) -FLASH 29F400BB-

#RENAULT_IAW5NR
id=105
[MARELLI IAW 5NR RENAULT] 'K-Line' (READ WRITE 32Kb) -FLASH 29F200BB-

#RENAULT_SAGEM3000
id=174
[SAGEM 3000 RENAULT] 'K-Line' (READ WRITE 64Kb) -MICRO 64F7055F40-
ATTENZIONE!!! LETTURA & SCRITTURA ABILITATE PER TEMPERATURA MOTORE MINORE DI 50?C
ATTENTION!!! READ & WRITE OPERATIONS AVAILABLE FOR ENGINE TEMPERATURE LESS THAN 50?

#CRENAULT_SAGEM_3000_CAN
id=188
[SAGEM 3000 RENAULT] 'CAN BUS' (READ WRITE 64Kb) -MICRO 64F7055F40-
ATTENZIONE!!! LETTURA & SCRITTURA ABILITATE PER TEMPERATURA MOTORE MINORE DI 50?C
ATTENTION!!! READ & WRITE OPERATIONS AVAILABLE FOR ENGINE TEMPERATURE LESS THAN 50?

#CRENAULT_VALEO_V40_CAN
id=330
[VALEO V40 RENAULT] 'CAN BUS' (READ WRITE 1Mb) -MICRO 64F7055F40-
ATTENZIONE!!! LETTURA & SCRITTURA ABILITATE PER TEMPERATURA MOTORE MINORE DI 50?C
ATTENTION!!! READ & WRITE OPERATIONS AVAILABLE FOR ENGINE TEMPERATURE LESS THAN 50?

#CRENAULT_SIM_32_CAN
id=227
[SIM 32 RENAULT] 'CAN BUS' (READ WRITE 512Kb) -MICRO 64F7055F40-

#RENAULT TRUCK MS6.2
id=282
[BOSCH MS6.2 RENAULT] 'K-Line' (READ WRITE 256Kb) -2 FLASH 29F010-

#RENAULT TRUCK MS6.3
id=168
[BOSCH MS6.3 RENAULT] 'K-Line' (READ WRITE 256Kb) -FLASH 29F400BT-

#RENAULT-NISSAN TRUCK MS6.4
id=93
[BOSCH MS6.4 NISSAN] 'K-Line' (READ WRITE 256Kb) -FLASH 29F400BT-

#CROTAX_SIEMENS_K
id=276
[ROTAX SIEMENS VDO] 'K-Line' (READ WRITE 320Kb) -MICRO ST10F269-

#CROTAX_SIEMENS_CAN
id=287
[ROTAX SIEMENS VDO] 'CAN BUS' (READ WRITE 320Kb) -MICRO ST10F269-
--- REQUIRED FIRMWARE VERSION 45 ----

#CROVER_SID201_CAN
id=192
[SIEMENS SID201] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CROVER_SID203_CAN
id=300
[SIEMENS SID203] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#ROVER_MENS_29F200
id=108
[MENS 3] 'K-Line' (READ WRITE 16Kb) -FLASH 29F200BB-

#CROVER_MENS_TD5_29F200
id=20
[MENSNNN TD5] 'K-Line' (READ WRITE 16Kb) -FLASH 29F200BB-

#ROVER_25_EMS_SIEMENS
id=134
[SIEMENS EMS ROVER 25] 'K-Line' (READ WRITE 32Kb) -FLASH 29F400BB-

#ROVER_EDC16CP39
id=262
[BOSCH EDC16CP39 FORD/LAND ROVER] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#SAAB_TRIONIC
id=135
[TRIONIC 8 SAAB] 'CAN BUS' (READ WRITE 1Mb) -FLASH 29BL802-

#CSCANIA_MS62
id=153
[BOSCH MS6.2 SCANIA ] 'K-Line' (READ WRITE 32Kb) -FLASH 29F400BT / 2 FLASH 29F010-

#CSCANIA_EDC/EMSS6_CAN
id=213
[MOTOROLA EDCS6/EMSS6 SCANIA ] 'CAN BUS' (READ WRITE 448Kb) -FLASH MPC555-

#CSCANIA_EDC/EMSS6_CAN
id=56
[MOTOROLA EDCS6/EMSS6 SCANIA ] 'CAN BUS' (READ WRITE 64Kb) -FLASH MPC555-

#CSCANIA_EMSS7_CAN
id=284
[MOTOROLA EMSS7 SCANIA ] 'CAN BUS' (READ WRITE 512Kb) -FLASH MPC563-

#CSSANGYONG_DELPHI_MPC555
id=159
[DELPHI DELCO 27 CDI] 'K-Line' (READ WRITE 448Kb) -FLASH MPC555-

#CSSANGYONG_DELPHI_DCM32
id=137
[DELPHI DCM32 CDI] 'K-Line' (READ WRITE 2.5Mb) -FLASH + MPC563-

#CSSANGYONG_DELPHI_DCM32 CAN
id=239
[DELPHI DCM32 CDI] 'CAN BUS' (READ WRITE 2.5Mb) -FLASH + MPC563-

#SMARTE2E3
id=46
[BOSCH MCC SMART 600/700cc] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB- READ BOOT MODE PIN 24 FLASH TO MASS

#SMARTEDC15C
id=47
[BOSCH EDC 15C SMART] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#SUZUKI DELPHIJTD E4
id=217
[DELPHI DELCO DDCR SUZUKI] 'K-Line' (READ WRITE 128Kb) -FLASH ST10F275-

#SUZUKI_EDC16C3
id=131
[BOSCH EDC16C3-9 EURO 3] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-
USARE TOOL SUZUKI KEY CODER DOPO SCRITTURA
ATTENZIONE!!! LETTURA & SCRITTURA ABILITATE PER TEMPERATURA MOTORE MINORE DI 50?C
LEGGERE GLI INIETTORI CON "INJECTOR CODER" PRIMA DI SCRIVERE
USE TOOL SUZUKY KEY CODER AFTER PROGRAMMATION
ATTENTION!!! READ & WRITE OPERATIONS AVAILABLE FOR ENGINE TEMPERATURE LESS THAN 50?C
READ INJECTOR WHIT "INJECTOR CODER" BEFORE WRITE

#SUZUKI KEY CODER
id=258
[KEY CODER EDC16C3] 'K-Line'
*** SEGUI ISTRUZIONI IN DOCUMENTS *** FOLLOW INSTRUCTION IN DOCUMENTS ***

#TOYOTA EDC16C10
id=208
[BOSCH EDC 16C10 TOYOTA] 'K-Line' (READ WRITE 1Mb) -FLASH AM29BL802-

#VOLVOD5EDC15C3_BOOT_MODE
id=92
[BOSCH EDC15C3 D5 VOLVO] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#VOLVOEDC16C31_6
id=170
[BOSCH EDC16+ C31 VOLVO] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-
VEDERE DOCUMENTI PDF PER CONNESSIONI - SEE PDF DOCUMENTS FOR CONNECTIONS

VOLVO TRUCK LUCAS
id=69
[LUCAS VOLVO] CAN J1708 (READ WRITE 32Kb)

VOLVO TRUCK TRW
id=205
[TRW VOLVO] CAN J1708 (READ WRITE 64Kb)
VEDERE DOCUMENTI PDF PLUG DIAGNOSI PER CONNESSIONI - SEE PDF DOCUMENTS PLUG DIAGNOSE FOR CONNECTIONS

macxlulu

29th January, 2012, 12:50 PM

i need to buy 4-5 pieces New Galletto - Offer to pw

z786

29th January, 2012, 01:40 PM

clone or ori

alfabit

29th January, 2012, 01:51 PM

clone or ori

Have those chinese already made clones ?

macxlulu

29th January, 2012, 01:56 PM

of course clone :) i have buy

jhonbyte

29th January, 2012, 04:07 PM

Hi, I'm newbie in this forum but it's great. I would like buy gto 2 clone but I have some cuestions for seller. Can somebody contact with me by mp?

Thanks ;)

mislav88

29th January, 2012, 04:16 PM

what is the price of g2 clone?

jhonbyte

29th January, 2012, 04:58 PM

yes, price of this? and if I have an original slave interface expired update, can I only buy cracked software for use it and use it like a master? Thanks

z786

29th January, 2012, 05:44 PM

Have those chinese already made clones ?

not china, another country

of course clone :) i have buy

only galletto fgtech 1 clone available

2012 interface not cloned yet

sorry, all fgtech clones sold out

powertdi

29th January, 2012, 06:47 PM

mislav88 and johnbyte , I have some info for you. Contact me.

risalelettronic

29th January, 2012, 09:35 PM

also of interest to me I have the original subscription expires
work clone on my interface software or hardware changes needed

eprommazza

2nd February, 2012, 10:05 AM

also of interest to me I have the original subscription expires
work clone on my interface software or hardware changes needed

i have successfull stop counter .....
my work forever...

best regards

: Thefinger:

Bazil_mb

2nd February, 2012, 10:37 AM

Marcus, what interface u know for denso ecuus?there is in US a tool named OpenPort , but even if read DENSO ecu,who will work on maps?
Here where i am..many cowboys around shout out are tunners but they mostly work on vw audi maps cars.
professionals vag cars...ha ha
Lets see tuners work on japanese and american cars. where they are?

Open port work with our free software ECU flash and is very nice
tactrix open port is cheaper and good

Zohar

2nd February, 2012, 08:25 PM

Open port work with our free software ECU flash and is very nice
tactrix open port is cheaper and good

Ecuflash works only with Mitsubishi MH7201, MH8206, MH8305 and MH8106 (via CAN) MCUs and Subaru Motorolla and Renesas MCUs. For reading/writing other types ( more than 20 types)of processors you should buy Piasini (master version needed- chinese clone works fine in JTAG mode, via OBD has many bugs ) or MMCFlasher software (better for chiptuning, may do reflash via OBD on car and works with any J2534 based interface, like Tactrix Openport 2.0, Mangoose orig. and clone, ALLScaner VCI, etc.). I have both products and everyone is good, but both have the pluses and minuses.

BR

z786

11th February, 2012, 09:27 PM

any updates?????

exxl

2nd March, 2012, 11:43 PM

they arent sold out :) maybe only your source is sold out :)

regards

not china, another country

only galletto fgtech 1 clone available

2012 interface not cloned yet

sorry, all fgtech clones sold out

zecas

3rd March, 2012, 12:05 AM

they arent sold out :) maybe only your source is sold out :)

regards

if your source is in PT they stop making it that is way it it sold out
if not let us know where to buy

regards

3abas27

4th March, 2012, 10:53 PM

hi
this is the list

// BDM MODE

#POWER PC
id=193
[BDM ALL MPC55x/56x] 'BDM' ( READ WRITE MICRO / FLASH / EEPROM )
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#MOTOROLA
id=312
[BDM ALL MC32xxx] 'BDM' ( READ WRITE FLASH 256K/512K/1M)
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS
--- REQUIRED FIRMWARE VERSION 52 ----

#MOTOROLA MPC55xx
id=332
[JTAG ALL MPC55xx] 'BDM' ( READ WRITE MICRO / EEPROM)
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS
--- REQUIRED FIRMWARE VERSION 52 ----

#RENESAS
id=319
[AUD RENESAS SH705x] 'BDM' ( READ MICRO 512K/1M)
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS
--- REQUIRED FIRMWARE VERSION 52 ----

// BOOT MODE

#CSIEMENS_BOOTMODE_200_400
id=94
BOOT SIEMENS 29F200/400BB CRIPT - PIN 28 FLASH TO MASS

#CSIEMENS_BOOTMODE_200_400
id=296
BOOT SIEMENS 29F200/400BB CRIPT - PIN 28 FLASH TO MASS

#CSIEMENS_BOOTMODE_200_400
id=72
BOOT SAGEM2000 29F200/400BB - PIN 28 FLASH TO MASS

#CSIMOS_BOOTMODE_200_400
id=335
BOOT SIMOS 3xx - 7.1 - 9.1 29F400BB - PIN 28 FLASH TO MASS

id=161
[BOOT ST10F168 Micro] 'K-Line' (READ WRITE 320K)

id=244
[BOOT ST10F269 Micro] 'K-Line' (READ WRITE 320K)

id=160
[BOOT ALL ST10F27x Micro] 'K-Line' (READ WRITE 896K)

id=229
[BOOT ALL ST10F27x Micro+Flash] 'K-Line' (READ WRITE 2M)

id=165
[BOOT ST10F280 Micro] 'K-Line' (READ WRITE 576K)

id=243
[BOOT ST10F296 Micro] 'K-Line' (READ WRITE 896K)

id=166
[BOOT ALL ST10F27x Micro] 'CAN-BUS' (READ WRITE 896K)

#RENESAS
id=313
[BOOT RENESAS SH705x] 'Rx-Tx' ( WRITE MICRO 512K/1M)
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS
--- REQUIRED FIRMWARE VERSION 52 ----

#MITSUBISHI
id=343
[BOOT MITSUBISHI MH7202] 'K-Line' (READ/WRITE 128K) - INTERNAL FLASH MICRO -
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS
--- REQUIRED FIRMWARE VERSION 52 ----

#BOOT TRICORE
id=308
[BOOT TRICORE SAK TC-1796] 'BOOT-TRICORE' (READ WRITE -INTERNAL/EXTERNAL FLASH TRICORE + EEPROM)
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=326
[BOOT TRICORE SAK TC-1796] 'BOOT-TRICORE' (READ WRITE -INTERNAL/EXTERNAL FLASH TRICORE + EEPROM)
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=309
[BOOT TRICORE SAK TC-1766] 'BOOT-TRICORE' (READ WRITE -INTERNAL/EXTERNAL FLASH TRICORE + EEPROM)
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=327
[BOOT TRICORE SAK TC-1766] 'BOOT-TRICORE' (READ WRITE -INTERNAL/EXTERNAL FLASH TRICORE + EEPROM)
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=310
[BOOT TRICORE SAK TC-1767] 'BOOT-TRICORE' (READ WRITE -INTERNAL/EXTERNAL FLASH TRICORE + EEPROM)
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=328
[BOOT TRICORE SAK TC-1767] 'BOOT-TRICORE' (READ WRITE -INTERNAL/EXTERNAL FLASH TRICORE + EEPROM)
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=311
[BOOT TRICORE SAK TC-1797] 'BOOT-TRICORE' (READ WRITE -INTERNAL/EXTERNAL FLASH TRICORE + EEPROM)
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=329
[BOOT TRICORE SAK TC-1797] 'BOOT-TRICORE' (READ WRITE -INTERNAL/EXTERNAL FLASH TRICORE + EEPROM)
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=279
[BOOT TRICORE SAK TC-1766/1796] 'BOOT-TRICORE' (READ WRITE 1,5/2M) -INTERNAL TRICORE FLASH-
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=280
[BOOT TRICORE SAK TC-1766/1796] 'BOOT-TRICORE' (READ WRITE 2/4M) -FLASH SPANSION S29CD016 / S29CD032-
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=281
[BOOT TRICORE SAK TC-1766/1796] 'BOOT-TRICORE' (READ WRITE 32/128K) -INTERNAL TRICORE EEPROM-
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=306
[BOOT TRICORE SAK TC-1767] 'BOOT-TRICORE' (READ WRITE 2M) -INTERNAL TRICORE FLASH-
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=307
[BOOT TRICORE SAK TC-1767] 'BOOT-TRICORE' (READ WRITE 64K) -INTERNAL TRICORE EEPROM-
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI DI BOOT IN DOCUMENTI - FOLLOW BOOT INSTRUCTION IN DOCUMENTS

#BOOT TRICORE
id=331
[BOOT TRICORE PASSWORD TPROT V08] 'BOOT-TRICORE' (READ 24 byte) -INTERNAL PASSWORD-
--- REQUIRED FIRMWARE VERSION 43 ----
SEGUIRE ISTRUZIONI IN BOOT TRICORE USER MANUAL - FOLLOW INSTRUCTION IN BOOT TRICORE USER MANUAL

#AUDIME755, ME71.1, ME715BOOTMODE
id=86
[BOSCH ME7.x.x VAG] 'K-Line' (READ WRITE 1Mb ) -FLASH 29F800BB-

#AUDIME755, ME71.1, ME715BOOTMODE
id=90
[BOSCH ME7.x.x VAG] 'K-Line' (READ WRITE 512Kb ) -FLASH 29F400BB-

#AUDIVW ERASE ERROR GATEWAY VAG
id=149
[TOOLS VAG] 'CAN' ERASE ERROR GATEWAY AFTER WRITE

#AUDIVW ERASE ERROR ECU VAG
id=302
[TOOLS VAG] 'CAN' ERASE ERROR ECU AFTER WRITE

#AUDIVW ABILITA COUNTER EDC16 U1
id=91
[ENABLE SET COUNTER EDC16U1] 'K-Line' (READ WRITE 448Kb) - Micro MPC556 -

#AUDIVW ABILITA COUNTER EDC16 DOUBLE U2/C2
id=122
[ENABLE SET COUNTER DOUBLE EDC16U2/C2] 'K-Line' (READ WRITE 448Kb) - Micro MPC556 -

#AUDIVW ABILITA COUNTER EDC16 U34
id=218
[ENABLE SET COUNTER EDC16U34] 'K-Line' (READ WRITE 2 Mb) -FLASH M58BW016xB-

#AUDIVW ABILITA COUNTER EDC16 CP34
id=240
[ENABLE SET COUNTER EDC16CP34] 'K-Line' (READ WRITE 2 Mb) -FLASH M58BW016xB-

#AUDIVW ABILITA COUNTER EDC16 U34 CAN
id=221
[ENABLE SET COUNTER EDC16U34] 'CAN-BUS' (READ WRITE 2 Mb) -FLASH M58BW016xB-

#AUDIVW ABILITA COUNTER EDC16 CP34 CAN
id=219
[ENABLE SET COUNTER EDC16CP34] 'CAN-BUS' (READ WRITE 2 Mb) -FLASH M58BW016xB-

#AUDIVW ABILITA COUNTER EDC16 CP34 CAN -CRAFTER-
id=272
[ENABLE SET COUNTER EDC16CP34 - CRAFTER] 'CAN-BUS' (READ WRITE 2 Mb) -FLASH M58BW016xB-
--- REQUIRED FIRMWARE VERSION 40 ----

#AUDIVW ABILITA COUNTER DOPPIA EDC16 CP34 CAN
id=220
[ENABLE SET COUNTER DOUBLE EDC16CP34] 'CAN-BUS' (READ WRITE 2 Mb x2) -FLASH M58BW016xB-

#AUDIEDC15P
id=54
[EDC15P+ VAG] 'K-Line' (READ WRITE 512Kb ) -FLASH 29F400BT-

#AUDIEDC15VP40_29F400
id=68
[EDC15VP40 V6 VAG] 'K-Line' (READ WRITE 512 Kb) -FLASH 29F400BT-

#AUDIEDC15VP40_29F800
id=89
[EDC15VP40+ V6 VAG] 'K-Line' (READ WRITE 1 Mb) -FLASH 29F800BT- CHECK VOLTAGE BATTERY

#VWEDC15V
id=55
[EDC15V VAG] 'K-Line' (READ WRITE 512 Kb) -FLASH 29F400BT-

#VWEDC15Pa
id=63
' BASSA VELOCITA / SLOW SPEED '
[EDC15P+ VAG] 'K-Line' (READ WRITE 512 Kb) -FLASH 29F400BT-

// EDC16

#AUDIVWEDC16U1
id=102
[AUDI VW SEAT SKODA EDC16 U1] 'K-Line' (READ WRITE 1Mb) -FLASH 29F802CB-

#CAUDIVWEDC16_U1_CAN
id=180
[AUDI VW SEAT SKODA EDC16 U1] 'CAN BUS' (READ WRITE 1 Mb) -FLASH 29BL802CB- CHECK VOLTAGE BATTERY

#AUDIVWEDC16U31_4C
id=133
[EDC16U3x VAG] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CAUDIVWEDC16_U3x_CAN
id=196
[EDC16U3x VAG] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB -

#AUDIVWEDC16 CP34
id=125
[EDC16CP34 VAG] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB- CHECK VOLTAGE BATTERY

#AUDIVWEDC16 CP34
id=175
[EDC16CP34 VAG] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB- CHECK VOLTAGE BATTERY

#AUDIVWEDC16 CP34
id=271
[EDC16CP34 VAG] 'CAN BUS' (READ WRITE 2Mb) -FLASH S29CD016GxP- CHECK VOLTAGE BATTERY
--- REQUIRED FIRMWARE VERSION 39 ----

#CAUDIVWEDC16C2_4_DOPPIA
id=202
[EDC16C2_4 V10 VAG 2 ECU] 'K-Line' (READ WRITE 2 ECUS 1Mb X2) -FLASH 29BL802CB- CHECK VOLTAGE BATTERY

#CAUDIVWEDC16C2_4_DOPPIA
id=203
[EDC16C2_4 V10 VAG 2 ECU] 'K-Line' (READ WRITE 2 ECUS 1Mb X2) -FLASH 29BL802CB- CHECK VOLTAGE BATTERY

#CAUDIVWEDC16CP34_V8_CAN
id=24
[EDC16C4 V8 VAG 2 ECU] 'CAN BUS' (READ WRITE 2 ECUS 2Mb X2) -FLASH M58BW016xB- CHECK VOLTAGE BATTERY

// BENZINA

#AUDIME7.5.5
id=66
[BOSCH ME7.5.5 VAG] 'K-Line' (READ WRITE 1Mb ) -FLASH 29F800BB- CHECK VOLTAGE BATTERY

#CAUDIME751_400
id=88
[BOSCH ME7.5.1 VAG] 'K-Line' (READ WRITE 512Kb ) -FLASH 29F400BB- CHECK VOLTAGE BATTERY

#CAUDIVW_MED9510
id=178
[BOSCH MED 9.5.10 VAG] 'K-Line' (READ WRITE 2 Mb) -FLASH M58BW016xB- CHECK VOLTAGE BATTERY

#CAUDIVW_MED9510
id=179
[BOSCH MED 9.5.10 VAG] 'CAN BUS' (READ WRITE 2 Mb) -FLASH M58BW016xB- CHECK VOLTAGE BATTERY
--- REQUIRED FIRMWARE VERSION 47 ----

#CAUDIVW_MED91
id=183
[BOSCH MED 9.1 VAG] 'CAN BUS' (READ WRITE 2 Mb) -FLASH M58BW016xB- CHECK VOLTAGE BATTERY
--- REQUIRED FIRMWARE VERSION 47 ----

#CAUDIVW_MED91
id=147
[BOSCH MED 9.1 VAG] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB- CHECK VOLTAGE BATTERY
--- REQUIRED FIRMWARE VERSION 47 ----

#CAUDIVWMED9.1_V10_DOPPIA
id=148
[MED9.1 V8/V10 FSI 2 ECU] 'CAN BUS' (READ WRITE 2 ECUS 2Mb X2) -FLASH M58BW016xB- CHECK VOLTAGE BATTERY
--- REQUIRED FIRMWARE VERSION 47 ----

#AUDIME7.1 V6
id=45
[BOSCH ME7.1 VAG] 'K-Line' (READ WRITE 1Mb ) -FLASH 29F800BB- CHECK VOLTAGE BATTERY

#AUDIME7.1.1 V6
id=128
[BOSCH ME7.1.1 VAG] 'K-Line' (READ WRITE 1Mb ) -FLASH 29F800BB- CHECK VOLTAGE BATTERY

#AUDIME7.1.1 V6 CAN
id=238
[BOSCH ME7.1.1 VAG] 'CAN BUS' (READ WRITE 1Mb ) -FLASH 29F800BB- CHECK VOLTAGE BATTERY

#CAUDIVW_IAW_MV
id=27
[MARELLI IAW MV] 'K-LINE' (READ WRITE 512Kb) -FLASH 29F400BB-

#CAUDIVW_IAW_HV
id=247
[MARELLI IAW 4HV] 'K-LINE' (READ WRITE 896Kb) -MICRO ST10F296-

#AUDI SIEMENS PPD1
id=209
[SIEMENS PPD1 VAG] 'K-Line' (READ WRITE 2Mb ) -FLASH M58BW016xB-

#AUDI SIEMENS PPD1
id=84
[SIEMENS PPD1 VAG] 'CAN BUS' (READ WRITE 2Mb ) -FLASH M58BW016xB-

#AUDI SIMOS 6.2/6.3
id=268
[SIMOS 6.2/6.3 VAG] 'CAN BUS' (READ WRITE 2Mb ) -FLASH M58BW016xB-

#AUDI SIMOS 3 / 9.1
id=334
[SIMOS 3 / 9.1 VAG] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB-

//TRICORE

#VW EDC17CP14
id=249
[BOSCH EDC17CP04_14 VAG] 'CAN BUS' (READ WRITE 2Mb ) -INT FLASH TRICORE / FLASH S29CD0xxGB-

#VW EDC17CP14
id=250
[BOSCH EDC17CP04_14 VAG] 'CAN BUS' (READ WRITE 2Mb ) -INT FLASH TRICORE / FLASH S29CD0xxGB-

#AUDI MED17
id=245
[BOSCH MED17 VAG] 'CAN BUS' (READ WRITE 2Mb ) -INT FLASH TRICORE / FLASH S29CD0xxGB-

#AUDI MED17
id=269
[BOSCH MED17 VAG] 'CAN BUS' (READ WRITE 2Mb ) -INT FLASH TRICORE / FLASH S29CD0xxGB-

#BMW330D
id=0
[BMW BOSCH DDE4] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#BMW320D
id=9
[BMW BOSCH DDE3] 'K-Line' (READ WRITE 256Kb) -FLASH 2 X 29F010-

#BMW318M52
id=8
[BMW BOSCH DME M5.2] 'K-Line' (READ WRITE 16Kb) -FLASH CC460-

#BMW318BMS46
id=17
[BMW BOSCH BMS46] 'K-Line' (READ WRITE3 2Kb) -FLASH 29F200BB-

#BMW318M52
id=126
[BMW BOSCH M5.2.1] 'K-Line' (READ WRITE3 2Kb) -FLASH 29F200BB-

#BMWMSS50M3E36
id=2
[BMW SIEMENS MSS50] 'K-Line' (READ WRITE 32Kb) -FLASH 2 X 28F200BxB-

#BMWMSS52M3E46
id=1
[BMW SIEMENS MSS52] 'K-Line' (READ WRITE 32Kb) -FLASH 2 X 29F200BB-

#BMWMSS53E46CSL
id=44
[BMW SIEMENS MSS54] 'K-Line' (READ WRITE 64Kb) -FLASH 2 X 29F400BB-

#BMWMINI90_110_S VDO_SIEMENS 2 DRIVERS IN 1
id=3
[BMW SIEMENS / VDO_SIEMENS E3 E4 ] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB-

#BMWMS41
id=5
[BMW SIEMENS MS41] 'K-Line' (READ WRITE 16Kb) -FLASH 28F200BB-

#BMWMS42
id=6
[BMW SIEMENS MS42] 'K-Line' (READ WRITE 32Kb) -FLASH 29F400BB-

#BMWMS43
id=7
[BMW SIEMENS MS43] 'K-Line' (READ WRITE 32Kb) -FLASH 29F400BB 32Kb-

#BMW_EDC16C31
id=23
[BMW BOSCH EDC16C31] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW_EDC16C35
id=237
[BMW BOSCH EDC16C35/CP35] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW_EDC16C35_CAN
id=236
[BMW BOSCH EDC16C35/CP35] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW_EDC17_CAN
id=158
[BMW BOSCH EDC17 CP02/C06] 'CAN BUS' (READ WRITE 2Mb) -INT FLASH TRICORE-
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW_MINI_MED17_CAN
id=298
[BMW-MINI BOSCH MED172/MEV172] 'CAN-BUS' (READ WRITE 2Mb) -INT FLASH TRICORE / FLASH S29CD0xxGB-
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW_MSS60/65_CAN
id=211
[BMW BOSCH MSS60/65] 'CAN BUS' (READ WRITE 128Kb/5Mb) - 2 x Micro MPC563+Flash -
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW_MSV70/MSS70
id=299
[BMW BOSCH MSV70/MSS70] 'K-Line' (READ WRITE 2,5Mb/128Kb) - Micro MPC563 + FLASH AM29BDD160GB -
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW_MSD80
id=235
[BMW BOSCH MSD80] 'K-LINE' (READ WRITE 2Mb) -INT FLASH TRICORE-
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW_MSD80_CAN
id=301
[BMW BOSCH MSD80] 'CAN BUS' (READ WRITE 2Mb) -INT FLASH TRICORE-
--- REQUIRED FIRMWARE VERSION 43 ----

#BMW318ME9
id=48
[BMW BOSCH ME9] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-

#BMWMODULOTV
id=76
ATTIVAZIONE MODULO TV

#BMWME71
id=79
[BMW BOSCH ME7.1] 'K-Line' (READ WRITE 64Kb) -FLASH 29F400BB-

#CHEVROLET_SIRIUS_5WY
id=169
[CHEVROLET SIEMENS SIRIUS 5WY] 'K-Line' (READ WRITE 32Kb) -FLASH 29F400BB-

#CHEVROLET_EDC16C39
id=207
[CHEVROLET BOSCH EDC16C39] 'CAN-BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CHRYSLEREDC15C2
id=65
[CHRYSLER EDC15C2] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#CHRYSLEREDC16C299
id=210
[CHRYSLER EDC16C2.9.9] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-

#CHRYSLEREDC16C2
id=278
[CHRYSLER EDC16C2] 'CAN BUS' (READ WRITE 1Mb) -FLASH 29BL802CB-

#CCITROEN_DELPHI_16
id=95
[DELPHI DELCO PSA] 'K-Line' (READ WRITE 448Kb) -FLASH MPC555-

#CCITROEN_DELPHI_DCM34
id=113
[DELPHI DELCO DCM 3.4 PSA] 'K-Line' (READ WRITE 1Mb)

#CCITROEN_DELPHI_DCM34_CAN
id=141
[DELPHI DELCO DCM 3.4 PSA] 'CAN BUS' (READ WRITE 1Mb)

#CCITROEN_DELPHI_DCM35_CAN
id=336
[DELPHI DCM 3.5 PSA] 'CAN BUS' (READ WRITE 3Mb) -MICRO MPC 5566-

#CCITROEN_VISTEON_DCU102
id=226
[VISTEON DCU102 PSA] 'K-Line' (WRITE 896Kb) -MICRO ST10F276-

#CORVETTE_DELPHY_E5
id=253
[DELPHY LS3] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-
--- REQUIRED FIRMWARE VERSION 35 ----

#HUMMER_DELPHY_E5
id=267
[DELPHY LH8] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-
--- REQUIRED FIRMWARE VERSION 35 ----

#CORVETTE_DELPHY_E4
id=259
[DELPHY LS2] 'CAN BUS' (READ WRITE 1,5Mb) -MICRO ST10 + Flash-
--- REQUIRED FIRMWARE VERSION 35 ----

#CORVETTE_DELPHY_VPWM
id=270
[DELPHY LS1] 'VPWM' (READ WRITE 512kb) -FLASH 28F400-
--- REQUIRED FIRMWARE VERSION 52 ----

#TRAIL BLAZER_DELPHY_VPWM
id=324
[DELPHY P10] 'VPWM' (READ WRITE 512kb) -FLASH 28F400-
--- REQUIRED FIRMWARE VERSION 52 ----

#SILVERADO_DELPHY_VPWM
id=325
[DELPHY P10] 'VPWM' (READ WRITE 512kb) -FLASH 28F400-
--- REQUIRED FIRMWARE VERSION 52 ----

#HUMMER_DELPHY_VPWM
id=320
[DELPHY P12] 'VPWM' (READ WRITE 1Mb) -FLASH MICRO-
--- REQUIRED FIRMWARE VERSION 52 ----

#CDAF_MS62
id=152
[BOSCH MS6.2 DAF ] 'K-Line' (READ WRITE 256Kb) -2 FLASH 29F010-

#CDAF_DELPHY
id=206
[DELPHY DMCI DAF ] 'CAN-BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CDAF_EDC7_Cummins
id=16
[BOSCH EDC7 CUMMINS DAF] 'CAN-BUS' (READ WRITE 456kb) -MICRO MPC555-
--- REQUIRED FIRMWARE VERSION 38 ----

#CDAF_EDC7 C3
id=303
[BOSCH EDC7 C3 Cummins] 'K-Line' (READ WRITE 448Kb) -FLASH MPC555-

#CDEUTZ_EDC16UC40
id=293
[BOSCH EDC16UC40 DEUTZ ] 'K Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CDEUTZ_LC5E
id=305
[ECU DEUTZ ] 'K Line' (READ WRITE 8kb) -EEPROM AT24C64-

#CDODGE_EDC16U31
id=223
[BOSCH EDC16U31 DODGE ] 'CAN-BUS' (VIRTUAL READ - WRITE 2Mb) -FLASH M58BW016xB-

#DUCATI IAW5SM
id=283
[MARELLI IAW 5SM] 'K-Line' (READ WRITE 576Kb) -MICRO ST10F280-

#PIAGGIO MARELLI MIU
id=285
[MARELLI MIU] 'K-Line' (READ WRITE 320Kb) -MICRO ST10F269-

#APRILIA IAW5DM
id=290
[MARELLI IAW 5DM] 'K-Line' (READ WRITE 896Kb) -MICRO ST10F296-

#FERRARIM52
id=34
[BOSCH M5.2 FERRARI ] 'K-Line' (WRITE 128Kb) -FLASH CC460-

#FERRARI360ME7
id=41
[2 ECUS BOSCH ME7.3H4 FERRARI ] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB-

#FERRARI 430 ME7.3.2
id=150
[2ECUS BOSCH ME7.3.2 FERRARI ] 'K-Line' (READ WRITE 1Mb) -FLASH 29F800BB-
[ECU BOSCH MED7.1 MASERATI ] 'K-Line' (READ WRITE 1Mb) -FLASH 29F800BB-

#Fiat/Alfa: m155
id=4
[BOSCH M1.5.5 FIAT/ALFA/LANCIA] 'K-Line' (WRITE 128Kb) -FLASH 29F010- PIN 10 TO 12V ENABLE PROGRAM SEE DOCUMENTS

#Fiat/Alfa/Lancia euro2
id= 13
[BOSCH EDC15 C5 FIAT] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#Fiat/Alfa/Lancia: euro3
id= 22
[BOSCH EDC15 C6/7/9] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#IAW MJD 6J MULTIGET
id=83
[MARELLI IAW MJD FIAT] 'K-Line' (READ WRITE 64/448Kb) -FLASH MPC555-

#CFIAT_IAWMJD6F3_K
id=38
[MARELLI IAW MJD6F3 FIAT] 'K-Line' (READ WRITE 2M/2,5M) -FLASH M58BW016xB-

#CFIAT_IAWMJD6F3_CAN
id=185
[MARELLI IAW MJD6F3 FIAT] 'CAN BUS' (VIRTUAL READ WRITE 64Kb) -FLASH M58BW016xB-

#CFIAT_IAW_5SF3_CAN
id=212
[MARELLI IAW 5SF3 (HW>=300) FIAT] 'CAN BUS' (VIRTUAL READ WRITE 448Kb) -MICRO ST10F280-

#CFIAT_IAW_5SF8_CAN
id=242
[MARELLI IAW 5SF8 FIAT] 'CAN BUS' (WRITE 896Kb) -MICRO ST10F296-

#CFIAT_IAW_8GMF_CAN
id=333
[MARELLI IAW 8GMF FIAT] 'CAN BUS' (WRITE 2Mb) -MICRO MPC5565-
--- REQUIRED FIRMWARE VERSION 52 ----

#CFIAT_IAW_MJ8DF_CAN
id=339
[MARELLI IAW MJ8DF FIAT] 'CAN BUS' (WRITE 2Mb) -MICRO MPC5565-
--- REQUIRED FIRMWARE VERSION 52 ----

#CFIAT_IAW_Injector_CAN
id=340
[FIAT MULTIAIR INJECTOR CODER] 'CAN BUS' (READ WRITE 4Kb)
--- REQUIRED FIRMWARE VERSION 52 ----

#CFIAT_IAW_MJ8DF
id=341
[MARELLI IAW MJ8DF FIAT] 'K-Line' (WRITE 2Mb) -MICRO MPC5565-
--- REQUIRED FIRMWARE VERSION 52 ----

#CFIAT_IAW_Injector
id=342
[FIAT MULTIAIR INJECTOR CODER] 'K-Line' (READ WRITE 4Kb)
--- REQUIRED FIRMWARE VERSION 52 ----

#FIATME7.2.1 EURO3
id=37
[BOSCH ME7 FIAT] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB- BOOT MODE PIN 20 TO MASS

#CALFA_MED711
id=215
[BOSCH MED 7.1.1 ALFA JTS] 'K-LINE' (WRITE 1Mb) -FLASH 29F800BB-
***Read with TOOL BOOT MODE - C167 - BOSCH ME7 1 Micro - Flash 800***

#CALFA_MED761
id=216
[BOSCH MED 7.6.1 ALFA JTS] 'K-LINE' (WRITE 896Kb) -MICRO ST10F275-
***"Read with TOOL BOOT MODE - ST10F273/5/6***

#CALFA_MED762
id=230
[BOSCH MED 7.6.2 ALFA JTS] 'K-LINE' (WRITE 2Mb) -FLASH 29F800BB-
***Read with TOOL BOOT MODE - ST10F273/5/6 BOOT MODE MICRO + FLASH EXT 29F800BB***

#ALFAME21
id=39
[BOSCH ME7 ALFA] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB- BOOT MODE PIN 20 TO MASS

#ALFAME731HA
id=40
[BOSCH ME7.3.1 ALFA E4] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB- BOOT MODE PIN 20 TO MASS

#ALFAM21 28F200BXB
id=53
[BOSCH ME2.1 ALFA] 'K-Line' (READ WRITE 256Kb) -FLASH 28F200BxB- READ BOOT MODE PIN 24 FLASH TO MASS

#FIATIAW 4AF 59F ST10
id=103
[MARELLI IAW 4AF 59F FIAT] 'K-Line' (READ WRITE 320Kb) -FLASH ST10168-

#FIATIAW 4AF 59F
id=106
[MARELLI IAW 4AF 59F FIAT] 'K-Line' (READ WRITE 320Kb) -FLASH ST10168- READ BOOT MODE PIN 104 MICRO TO MASS
DECODIFICA E CLONA TUTTE IAW 4AF/59F -- VEDI PDF IN CARTELLA DOCUMENTI
DECODE END CLONE ALL IAW 4AF/ 59F -- SEE PDF IN FOLDER DOCUMENTS

#IAW 59F / 5NF MOTOROLA
id=120
[MARELLI IAW 49F/4EF/59F/5NF FIAT] 'K-Line' (READ WRITE 256Kb) -MICRO MOTOROLA FLASH 29F200BB-

#FIATEDC16C8
id=50
[EDC16C8 FIAT/ALFA/LANCIA] 'K-Line' (READ WRITE 1Mb) -FLASH 29F802CB-

#FIATEDC16C39
id=132
[EDC16C39 FIAT/ALFA/LANCIA] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CFIAT_EDC16C39_CAN
id=191
[EDC16 C39 FIAT/ALFA/LANCIA] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CFIAT_ME7910_CAN
id=18
[BOSCH ME7 9.10 FIAT/ALFA/LANCIA] 'CAN BUS' (VIRTUAL READ WRITE 896Kb) -MICRO ST10F275-

#CFIAT_ME7910
id=224
[BOSCH ME7 9.10 FIAT/ALFA/LANCIA] 'K-Line' (VIRTUAL READ WRITE 896Kb) -MICRO ST10F275-

#CFIAT_MED17
id=251
[BOSCH MED17.31 FIAT/ALFA/LANCIA] 'K-Line' (VIRTUAL READ WRITE 2Mb) -MICRO TRICORE TC1766-

#FORD_EDC16C3
id=195
[EDC16C3 FORD] 'CAN BUS' (READ WRITE 1Mb) -FLASH 29F802CB -

#FORD_EDC16C34
id=304
[EDC16C34 FORD] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#FORD_EDC16CP39
id=263
[BOSCH EDC16CP39 FORD/LAND ROVER] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#FORD_DELPHY_DCM3.5
id=337
[DELPHY DCM 3.5 FORD] 'CAN BUS' (WRITE 3Mb) -MICRO MPC 5566-

#CFORD_SID202_CAN
id=194
[SIEMENS SID202 FORD] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CFORD_SID206_CAN Focus2000
id=214
[SIEMENS SID206 FORD] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CFORD_SID206_CAN NewFiesta1400
id=231
[SIEMENS SID206 FORD] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CFORD_SID803_CAN
id=144
[SIEMENS SID803 FORD] 'CAN BUS' (READ WRITE 448Kb)

#CFORD_SID803A_CAN
id=42
[SIEMENS SID803A FORD] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CFORD_SID802_CAN
id=190
[SIEMENS SID 802/804 FORD] 'CAN BUS' (READ WRITE 512Kb) -FLASH 29F400BB-

#CFORD_SIM 22_CAN
id=61
[SIEMENS SIM 22] 'CAN BUS' (READ WRITE 512Kb) -FLASH 29F400BB

#CFORD_EMS200_CAN
id=232
[SIEMENS EMS 200] 'CAN BUS' (READ WRITE 512Kb) -FLASH 29F400BB

#FORD_ME90 2,5 20V
id=136
[ME90 FORD] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-
PROGRAMMARE UNA VOLTA IN BDM PRIMA DI SCRIVERE FILE MODIFICATO
PROGRAMME ONCE IN BDM MODE BEFORE MODIFIED FILE WRITING

#CFORDELPHY_FOMOCO_CAN
id=87
[FoMoCo FORD] 'CAN BUS' (READ WRITE 896Kb) -ST10F276-

#CFORDELPHY_TDI_J1850
id=187
[VISTEON TDI EEC-V FORD *PWM*] '* P.W.M.*' (READ WRITE 256/320/448Kb) -FLASH 28F200BXB / ST10Fxx / MPC555-

#CFORDELPHY_EEC5_J1850
id=189
[VISTEON EEC-V FORD *PWM*] '* P.W.M.*' (READ WRITE 128Kb) -FLASH xxxx-

#HONDA_EDC16C31
id=156
[BOSCH EDC16C31 HONDA] 'K-Line' (READ WRITE 2Mb) -FLASH 29F802CB-

#ISUZU_TRANSTRON
id=286
[TRANSTRON ISUZU ] 'CAN BUS' (READ WRITE 1Mb) -MICRO RENESAS-

#IVECO_MS63_200
id=143
[BOSCH MS6.3/4 IVECO ] 'K-Line' (READ WRITE 256Kb) -FLASH 29F400BT-

#IVECO_EDC7
id=51
[BOSCH EDC7C1 IVECO ] 'K-Line' (READ WRITE 64Kb) -FLASH MPC555-

#CIVECO_EDC7UC31
id=60
[BOSCH EDC7 UC31 IVECO ] 'K-Line' (READ WRITE 64Kb) -FLASH M58BW016xB-

#CIVECO_MS62
id=97
[BOSCH MS6.2 IVECO ] 'K-Line' (READ WRITE 32Kb) -2 FLASH 29F010-

#IVECO_EDC16 C8
id=99
[BOSCH EDC16C8 IVECO ] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-

#IVECO_EDC16 C39_5
id=173
[BOSCH EDC16C39 IVECO ] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#JAGUAR SID 201 CAN
id=225
[SIEMENS SID201] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#JHON DEERE L6
id=265
[JOHN DEERE L4/L6] 'CAN BUS' (READ WRITE 32Kb) -2 FLASH 29F010-
--- REQUIRED FIRMWARE VERSION 35 ----

#JHON DEERE L11
id=252
[JOHN DEERE L9/L11/L12] 'CAN BUS' (READ WRITE 32Kb) -MICRO ST10-
--- REQUIRED FIRMWARE VERSION 35 ----

#JHON DEERE L14
id=246
[JOHN DEERE L14] 'CAN BUS' (READ WRITE 512Kb) -MICRO MPC564-
--- REQUIRED FIRMWARE VERSION 35 ----

#JHON DEERE L14 INJECTOR
id=260
[JOHN DEERE L14 GEAR/INJECTOR CODER] 'CAN BUS' (READ WRITE 64Kb)
--- REQUIRED FIRMWARE VERSION 35 ----

#JHON DEERE L16
id=261
[JOHN DEERE L16] 'CAN BUS' (READ WRITE 896Kb) -MICRO ST10F275-
--- REQUIRED FIRMWARE VERSION 35 ----

#JHON DEERE L16 INJECTOR
id=264
[JOHN DEERE L16 GEAR/INJECTOR CODER] 'CAN BUS' (READ WRITE 64Kb)
--- REQUIRED FIRMWARE VERSION 35 ----

#CLAAS L16
id=323
[CLAAS L16] 'CAN BUS' (READ WRITE 896Kb) -MICRO ST10F275-
--- REQUIRED FIRMWARE VERSION 35 ----

#CLAAS L16 INJECTOR
id=322
[CLAAS L16 GEAR/INJECTOR CODER] 'CAN BUS' (READ WRITE 64Kb)
--- REQUIRED FIRMWARE VERSION 35 ----

#KIA DELPHI DDCR E3
id=119
[DELPHI DDCR E3 KIA] 'K-Line' (READ WRITE 40Kb/256Kb) -FLASH 29F200BB-

#KIA DELPHI DDCR - BOOTMODE
id=167
[DELPHI DDCR E3] 'K-Line' (READ WRITE 256Kb) -FLASH 29F200BB-

#KIA DELPHI DCM 32
id=140
[DELPHI DCM32 E4 KIA] 'CAN BUS' ( VIRTUAL READ WRITE 2,5 Mb) -FLASH M58BW016xB-

#KIA_EDC16+c39
id=145
[BOSCH EDC16 C39 KIA] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#KIA_EDC17
id=277
[BOSCH EDC17 KIA] 'CAN BUS' (VIRTUAL READ - WRITE 2Mb) -INT FLASH TRICORE-

#HYUNDAI_EDC17
id=321
[BOSCH EDC17 HYUNDAI] 'CAN BUS' (VIRTUAL READ - WRITE 1,5Mb) -INT FLASH TRICORE-

#MAN_EDC7 C3
id=139
[BOSCH EDC7 C3 MAN] 'K-Line' (READ WRITE 448Kb) -FLASH MPC555-

#MAN_EDC7 C32+
id=201
[BOSCH EDC7 C32+ MAN] 'K-Line' (READ WRITE 2Mb)

#MAN_MS6.1
id=151
[BOSCH MS6.1 MAN] 'K-Line' (READ WRITE 256Kb) -FLASH 29F200BT-

#MAN_MS6.4
id=157
[BOSCH MS6.4 MAN] 'K-Line' (READ WRITE 256Kb) -FLASH 29F200BT-

#MASSEY_FERGUSON_SISU_EDC7UC31
id=291
[BOSCH EDC7UC31] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#MASSEY_FERGUSON_SISU_EDC7UC31
id=292
[BOSCH EDC7UC31] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#MERCEDESEDC15C5
id=58
[BOSCH EDC16C5 MERCEDES] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#MERCEDESEDC15C6
id=59
[BOSCH EDC16C6 MERCEDES] 'K-Line' (READ WRITE 1Mb) -FLASH 29F800BT-

#MERCEDES ACTROS BOOT 200
id=142
[TEMIC TRACK MERCEDES] 'K-Line' (READ WRITE 256Kb) -FLASH 29F200- BOOT MODE SEE DOCUMENTS

#MERCEDES ACTROS BOOT 400
id=155
[TEMIC TRACK MERCEDES] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400- BOOT MODE SEE DOCUMENTS

#MERCEDES EDC16+ C31 C32
id=177
[BOSCH EDC16+ C31 C32 MERCEDES] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#MERCEDES EDC16 C2_7 29BL802CB
id=121
[BOSCH EDC16 C2/4/7 MERCEDES] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-

#MERCEDES EDC16CP31
id=222
[BOSCH EDC16+ CP31 ] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#MERCEDES EDC16CP31 CAN
id=176
[BOSCH EDC16+ CP31 ] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#MERCEDESME728
id=70
[BOSCH ME7.2.7/8 MERCEDES] 'K-Line' (READ WRITE 512b) -FLASH 29F400BB- READ BOOT MODE PIN 24 FLASH TO MASS

#MERCEDESME728AMG
id=77
[BOSCH ME7.2.7/8 AMG MERCEDES] 'K-Line' (READ WRITE 512b) -FLASH 29F400BB- READ BOOT MODE PIN 24 FLASH TO MASS

#MERCEDESME21
id=78
[BOSCH ME2.1MERCEDES] 'K-Line' (READ WRITE 256Kb) -FLASH 28F200BB- PIN B3 TO 12V ENABLE PROGRAM

#MERCEDES_SIEMENS_5WK9_SIM4LE
id=100
[SIEMENS SIM4LE MERCEDES] 'K-Line' (READ WRITE 141Kb) -FLASH 29F400BB-

#MERCEDES_SIEMENS_SIM4LKE
id=172
[SIEMENS SIM4LE MERCEDES] 'K-Line' (READ WRITE 320Kb) -FLASH 29F800BB-

#MERCEDES_SIEMENS_SIM266
id=255
[SIEMENS SIM266 MERCEDES] 'CAN BUS' (WRITE 2Mb) -FLASH AM29BDD160GB-

#NISSANEDC15C2
id=62
[BOSCH EDC15C2 NISSAN] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#OPEL17DTI16V_1
id=10
[DELPHI DELCO Y17L ECM EURO2] 'K-Line' (READ WRITE 208Kb) -FLASH 29F200BB- CHECK VOLTAGE BATTERY

#OPEL17DTI16V_2
id=12
[DELPHI DELCO Y17L ECM EURO3] 'K-Line' (READ WRITE 256Kb) -FLASH 29F200BB- CHECK VOLTAGE BATTERY

#OPEL17DTI16V_3
id=110
[DELPHI DELCO Y17L ECM EURO4] 'K-Line' (READ WRITE 256Kb) -FLASH 29F200BB- CHECK VOLTAGE BATTERY

#OPELEDC15M
id=21
[BOSCH EDC 15M OPEL EURO2] 'K-Line' (WRITE 256Kb) -FLASH 29F200BB / 2 PLCC 29F010- CHECK VOLTAGE BATTERY

#OPELEDC15C7 euro3
id= 294
[BOSCH EDC15 C7] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#OPEL2200DTR
id=71
[BOSCH EDC16VM IBRIDA SU POMPA OPEL EURO 3] 'K-Line' (WRITE 1Mb) -FLASH 29BL802CB-

#OPEL_IAW_MJD
id=104
[MARELLI IAW MJD OPEL EURO 3] 'K-Line' (READ WRITE 448Kb / 64Kb) -FLASH MPC555- CHECK VOLTAGE BATTERY

#COPEL_IAW_MJD+6F3_K
id=241
[MARELLI IAW MJD+ 6F3 OPEL] 'K-Line' (READ WRITE 2M/2,5M) -FLASH M58BW016xB-

#COPEL_IAW_MJD+6F3_Can TAB
id=257
[MARELLI IAW MJD+ 6F3 OPEL] 'CAN BUS' (READ WRITE 2M) -FLASH M58BW016xB-

#COPEL_IAW_MJD+6F3_Can INTERA
id=248
[MARELLI IAW MJD+ 6F3 OPEL] 'CAN BUS' (READ WRITE 2M) -FLASH M58BW016xB-

#COPEL_EDC16C9_CAN
id=184
[BOSCH EDC16_C3 OPEL EURO 4] 'CAN BUS' (WRITE 1Mb) -FLASH 29BL802CB-

#COPEL_EDC16C39_CAN
id=162
[BOSCH EDC16_C39 OPEL] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#COPEL_ME762_CAN
id=186
[BOSCH ME762 OPEL] 'CAN BUS' (READ WRITE 832K)

#OPELM155E3
id=15
[BOSCH M1.5.5 EURO 3] 'K-Line' (READ WRITE 128Kb) -FLASH 29F010- CHECK VOLTAGE BATTERY

#OPELME155E4
id=14
[BOSCH ME1.5.5 OPEL EURO4] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB- CHECK VOLTAGE BATTERY

#OPELME761E4
id=254
[BOSCH ME7.6.1 OPEL EURO4] 'K-Line' (READ WRITE 1Mb) -FLASH 29F800BB- CHECK VOLTAGE BATTERY

#OPELDELCO_1
id=35
[DELPHI DELCO 1.4/1.6 16V ECM EURO 2] 'K-Line' (WRITE 128Kb) -FLASH 29F010 PLCC-

#OPELDELCO_2
id=31
[DELPHI DELCO 1.4/1.6 16V ECM EURO 3] 'K-Line' (READ WRITE 88Kb) -FLASH 29F010-

#OPELDELCO_3
id=30
[DELPHI DELCO 1.4/1.6 16V ECM EURO 4] 'K-Line' (READ WRITE 256Kb) -FLASH 29F200BB-

#OPEL DELCO Z22SE
id=32
[DELPHI DELCO 2.2 OPEL] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB-

#OPELSIMTEC56
id=73
[SIEMENS SIMTEC 56 EURO 2] 'K-Line' (READ WRITE 64Kb) -FLASH 29F010-

#OPELSIMTEC70
id=29
[SIEMENS SIMTEC 90 EURO 3] 'K-Line' (READ WRITE 112Kb) -FLASH 29F010-

#OPELSIMTEC90
id=52
[SIEMENS SIMTEC 90 EURO 4] 'K-Line' (READ WRITE 24Kb) -FLASH 29F010-

#PEUGEOTEDC15C2
id=19
[BOSCH EDC15Cx EURO 3] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#PEUGEOT SID 801/4
id=81
[SIEMENS SID 801/2/4] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB- READ BOOT MODE PIN 28 FLASH TO MASS

#PEUGEOT SID 806
id=228
[SIEMENS SID 806] 'CAN-BUS' (WRITE 512Kb) -FLASH 29F400BB- READ BOOT MODE PIN 28 FLASH TO MASS

#PEUGEOT SID 803 2000cc 16V 29BL802CB
id=129
[SIEMENS SID 803 EURO 3] 'K-Line' (WRITE 448Kb) -FLASH 29BL802CB- READ BDM

#PEUGEOT SID 803A 2000cc 16V M58BW016xB
id=146
[SIEMENS SID 803A EURO 4] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#PEUGEOT SID 803A CAN M58BW016xB
id=114
[SIEMENS SID 803A EURO 4] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#PEUGEOT SID 803A CAN M58BW016xB
id=234
[SIEMENS SID 201 EURO 4] 'CAN BUS' (WRITE 2Mb) -FLASH M58BW016xB- READ BDM

#PEUGEOT SID 201 M58BW016xB
id=101
[SIEMENS SID 201 EURO 4] 'K-LINE' (WRITE 2Mb) -FLASH M58BW016xB- READ BDM

#CPEUGEOTSDI_BOOTMODE400 881/801/804/806 1400cc ,2000CC
id=94
[SIEMENS SID 881/801/804/806] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB- READ WRITE BOOT MODE PIN 28 FLASH TO MASS

#PEUGEOT_EDC16C3/9 1,4 1,6 16V
id=96
[BOSCH EDC16 C0/8 C3/9 EURO 3] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-

#PEUGEOT_EDC16 C34 1,4 1,6 16V
id=130
[BOSCH EDC16 C34/C39 EURO 4/5 FAP] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#PEUGEOT_EDC16C34_CAN 1,4 1,6 16V
id=26
[BOSCH EDC16C34/C39 EURO 4/5 FAP] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#PEUGEOT_EDC16C39 // tipo MITSUBISHI
id=64
[BOSCH EDC16C39 EURO 5 FAP] 'K-LINE' (READ WRITE 2Mb) -FLASH M58BW016xB-

#PEUGEOT_EDC16C39_CAN // tipo MITSUBISHI
id=75
[BOSCH EDC16C39 EURO 5 FAP] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CPEUGEOT_MED17_CAN SAK 1796
id=49
[BOSCH MEx17 E4 PSA] 'CAN BUS' (READ WRITE 2Mb) -FLASH CD032GORFAN01-

#CPEUGEOT_MED17_CAN SAK 1796
id=314
[BOSCH MEx17 E5 PSA] 'CAN BUS' (WRITE 2Mb) -INTERNAL FLASH TRICORE-

#PEUGEOTME744
id=33
[BOSCH PSA ME7.4.4 EURO 3] 'K-Line' (READ WRITE 64Kb) -FLASH 29F400BB-

#PEUGEOTME745
id=138
[BOSCH PSA ME7.4.5 EURO 4] 'K-Line' (READ WRITE 128Kb) -FLASH ST10F275-

#CPEUGEOT_ME745_CAN
id=67
[BOSCH ME7.4.5 EURO 4] 'CAN BUS' (READ WRITE 128Kb) -FLASH ST10F275-

#PEUGEOTME795
id=275
[BOSCH PSA-TOYOTA ME7.9.5 EURO 4] 'K-Line' (WRITE 896Kb) -FLASH ST10F276-

#PEUGEOTIAW48P
id=43
[MARELLI IAW 48P] 'K-Line' (WRITE 256Kb) -FLASH 29F200BB-

#PEUGEOTIAW48P2
id=80
[MARELLI IAW 48P2] 'K-Line' (READ WRITE 64Kb) -FLASH 29F400BB-

#PEUGEOTIAW6LPA01_20
id=82
[MARELLI IAW 6LP01] 'K-Line' (READ WRITE 64Kb/ 448-480Kb) -FLASH ST10F275-

#PEUGEOTIAW6KPB
id=316
[MARELLI IAW 6KPB] 'K-Line' (WRITE 128Kb/ 896Kb) -FLASH ST10F296-

#PEUGEOTIAW6KPB_CAN
id=317
[MARELLI IAW 6KPB] 'CAN BUS' (WRITE 128Kb/ 896Kb) -FLASH ST10F296-

#PEUGEOT_VALEO_JOHNSON
id=233
[PSA VALEO JOHNSON] 'K-Line' (READ WRITE 576Kb)
--- SE NON COMUNICA COLLEGARE LINEA K A PIN B1 (presa grande ECU) ---
--- IF WAKE ERROR CONNECT K-LINE TO PIN B1 (big plug ECU) ---

#PEUGEOT_VALEO_JOHNSON CAN
id=274
[PSA VALEO JOHNSON] 'CAN BUS' (READ WRITE 576Kb)
--- SE NON COMUNICA COLLEGARE LINEA K A PIN B1 (presa grande ECU) E USA DRIVER K ---
--- IF WAKE ERROR CONNECT K-LINE TO PIN B1 (big plug ECU) AND USE K-LINE DRIVER ---

#PEUGEOT_SAGEM2000_14_E3
id=118
[SAGEM 2000 PEUGEOT E3] 'K-Line' (READ WRITE 32Kb) -FLASH 29F200BB-

#PEUGEOT_SAGEM2000_14_E4
id=112
[SAGEM 2000 PEUGEOT E4] 'K-Line' (READ WRITE 64Kb) -FLASH 29F400BB-

#PORSCHE CLEAR ERROR K-LINE
id=204
[BOSCH ME7.1.1 PORSCHE] 'K-Line' CLEAR ERROR AFTER WRITE FOR ME7.1.1 (CAYENNE)

#PORSCHE996_CC460
id=115
[BOSCH M5.2 PORSCHE] 'K-Line' (READ WRITE 16Kb) -FLASH CC460-

#PORSCHE_ME72_400
id=124
[BOSCH ME7.2 PORSCHE] 'K-Line' (BOOT READ WRITE 512Kb) -FLASH 29F400BB-

#PORSCHE_ME784_800
id=154
[BOSCH ME7.8.4 PORSCHE] 'K-Line' (BOOT READ WRITE 1Mb) -FLASH 29F800BB-

#PORSCHE_ME7.1.1_800 TURBO
id=127
[BOSCH ME7.1.1 PORSCHE] 'K-Line' (READ WRITE 1Mb) -FLASH 29F800BB-

#PORSCHE_ME7.1.1_800 ASP
id=273
[BOSCH ME7.1.1 PORSCHE] 'K-Line' (READ WRITE 1Mb) -FLASH 29F800BB-

#RENAULT DELPHIJTD
id=28
[DELPHI DELCO DDCR NISSAN/RENAULT] 'K-Line' (READ WRITE 40Kb) -FLASH 29F200BB-

#RENAULT DELPHIJTD E4
id=98
[DELPHI DELCO DDCR NISSAN/RENAULT] 'K-Line' (READ WRITE 128Kb) -FLASH ST10F275-

#CRENAULT_DELPHY_E4_dCi_CAN
id=123
[DELPHI DELCO DDCR NISSAN/RENAULT] 'CAN BUS' (READ WRITE 128Kb) -FLASH ST10F275-

#CRENAULT_DENSO_DH5
id=116
[DENSO DH5 RENAULT] 'K-Line' (READ WRITE 224Kb) -FLASH 29F400BB-

RENAULT_SID301
id=109
[SIEMENS SID 301 RENAUT] 'CAN-BUS' (READ WRITE 2Mb) -FLASH AM29BDD160-

#CRENAULT_EDC16C3_INJECTOR_CAN
id=181
[INJECTOR CODE BOSCH EDC16 C3 EURO 3] 'CAN BUS' (READ WRITE) -95C040-

#RENAULT_EDC16C3
id=117
[BOSCH EDC16C3-9 EURO 3] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-
ATTENZIONE!!! LETTURA & SCRITTURA ABILITATE PER TEMPERATURA MOTORE MINORE DI 50?C
LEGGERE GLI INIETTORI CON "INJECTOR CODER" PRIMA DI SCRIVERE
ATTENTION!!! READ & WRITE OPERATIONS AVAILABLE FOR ENGINE TEMPERATURE LESS THAN 50?C
READ INJECTOR WHIT "INJECTOR CODER" BEFORE WRITE

#RENAULT_EDC16CP33
id=171
[BOSCH EDC16CP33 OPEL / RENAULT EURO 4] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-
PER RENAULT MASCOTT --> VEDERE PLUG DIAGNOSE PDF - SEE PDF PLUG DIAGNOSE
ATTENZIONE!!! PER AUTO CON CHIAVE INTELLIGENTE INSERIRE COMUNQUE LA CHIAVE NEL PIANTONE
ATTENTION!!! IN CAR WITH INTELLIGENT KEY INSERT KEY IN THE DASHBOARD ANYWAY

#CRENAULT_EDC16CP33_C36_CAN
id=182
[BOSCH EDC16CP33 OPEL / RENAULT EURO 4] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-
[BOSCH EDC16C3-9 EURO 3] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-
ATTENZIONE!!! LETTURA & SCRITTURA ABILITATE PER TEMPERATURA MOTORE MINORE DI 50?C
ATTENTION!!! READ & WRITE OPERATIONS AVAILABLE FOR ENGINE TEMPERATURE LESS THAN 50?C
ATTENZIONE!!! PER AUTO CON CHIAVE INTELLIGENTE INSERIRE COMUNQUE LA CHIAVE NEL PIANTONE
ATTENTION!!! IN CAR WITH INTELLIGENT KEY INSERT KEY IN THE DASHBOARD ANYWAY

#RENAULTSIRIUS32
id=11
[SIEMENS SIRIUS 32 RENAULT] 'K-Line' (READ WRITE 32Kb) -FLASH 29F200BB-

#RENAULTSIRIUS34
id=107
[SIEMENS SIRIUS 34 RENAULT] 'K-Line' (READ WRITE 32Kb) -FLASH 29F400BB-

#RENAULT_IAW5NR
id=105
[MARELLI IAW 5NR RENAULT] 'K-Line' (READ WRITE 32Kb) -FLASH 29F200BB-

#RENAULT_SAGEM3000
id=174
[SAGEM 3000 RENAULT] 'K-Line' (READ WRITE 64Kb) -MICRO 64F7055F40-
ATTENZIONE!!! LETTURA & SCRITTURA ABILITATE PER TEMPERATURA MOTORE MINORE DI 50?C
ATTENTION!!! READ & WRITE OPERATIONS AVAILABLE FOR ENGINE TEMPERATURE LESS THAN 50?

#CRENAULT_SAGEM_3000_CAN
id=188
[SAGEM 3000 RENAULT] 'CAN BUS' (READ WRITE 64Kb) -MICRO 64F7055F40-
ATTENZIONE!!! LETTURA & SCRITTURA ABILITATE PER TEMPERATURA MOTORE MINORE DI 50?C
ATTENTION!!! READ & WRITE OPERATIONS AVAILABLE FOR ENGINE TEMPERATURE LESS THAN 50?

#CRENAULT_VALEO_V40_CAN
id=330
[VALEO V40 RENAULT] 'CAN BUS' (READ WRITE 1Mb) -MICRO 64F7055F40-
ATTENZIONE!!! LETTURA & SCRITTURA ABILITATE PER TEMPERATURA MOTORE MINORE DI 50?C
ATTENTION!!! READ & WRITE OPERATIONS AVAILABLE FOR ENGINE TEMPERATURE LESS THAN 50?

#CRENAULT_SIM_32_CAN
id=227
[SIM 32 RENAULT] 'CAN BUS' (READ WRITE 512Kb) -MICRO 64F7055F40-

#RENAULT TRUCK MS6.2
id=282
[BOSCH MS6.2 RENAULT] 'K-Line' (READ WRITE 256Kb) -2 FLASH 29F010-

#RENAULT TRUCK MS6.3
id=168
[BOSCH MS6.3 RENAULT] 'K-Line' (READ WRITE 256Kb) -FLASH 29F400BT-

#RENAULT-NISSAN TRUCK MS6.4
id=93
[BOSCH MS6.4 NISSAN] 'K-Line' (READ WRITE 256Kb) -FLASH 29F400BT-

#CROTAX_SIEMENS_K
id=276
[ROTAX SIEMENS VDO] 'K-Line' (READ WRITE 320Kb) -MICRO ST10F269-

#CROTAX_SIEMENS_CAN
id=287
[ROTAX SIEMENS VDO] 'CAN BUS' (READ WRITE 320Kb) -MICRO ST10F269-
--- REQUIRED FIRMWARE VERSION 45 ----

#CROVER_SID201_CAN
id=192
[SIEMENS SID201] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#CROVER_SID203_CAN
id=300
[SIEMENS SID203] 'CAN BUS' (READ WRITE 2Mb) -FLASH M58BW016xB-

#ROVER_MENS_29F200
id=108
[MENS 3] 'K-Line' (READ WRITE 16Kb) -FLASH 29F200BB-

#CROVER_MENS_TD5_29F200
id=20
[MENSNNN TD5] 'K-Line' (READ WRITE 16Kb) -FLASH 29F200BB-

#ROVER_25_EMS_SIEMENS
id=134
[SIEMENS EMS ROVER 25] 'K-Line' (READ WRITE 32Kb) -FLASH 29F400BB-

#ROVER_EDC16CP39
id=262
[BOSCH EDC16CP39 FORD/LAND ROVER] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-

#SAAB_TRIONIC
id=135
[TRIONIC 8 SAAB] 'CAN BUS' (READ WRITE 1Mb) -FLASH 29BL802-

#CSCANIA_MS62
id=153
[BOSCH MS6.2 SCANIA ] 'K-Line' (READ WRITE 32Kb) -FLASH 29F400BT / 2 FLASH 29F010-

#CSCANIA_EDC/EMSS6_CAN
id=213
[MOTOROLA EDCS6/EMSS6 SCANIA ] 'CAN BUS' (READ WRITE 448Kb) -FLASH MPC555-

#CSCANIA_EDC/EMSS6_CAN
id=56
[MOTOROLA EDCS6/EMSS6 SCANIA ] 'CAN BUS' (READ WRITE 64Kb) -FLASH MPC555-

#CSCANIA_EMSS7_CAN
id=284
[MOTOROLA EMSS7 SCANIA ] 'CAN BUS' (READ WRITE 512Kb) -FLASH MPC563-

#CSSANGYONG_DELPHI_MPC555
id=159
[DELPHI DELCO 27 CDI] 'K-Line' (READ WRITE 448Kb) -FLASH MPC555-

#CSSANGYONG_DELPHI_DCM32
id=137
[DELPHI DCM32 CDI] 'K-Line' (READ WRITE 2.5Mb) -FLASH + MPC563-

#CSSANGYONG_DELPHI_DCM32 CAN
id=239
[DELPHI DCM32 CDI] 'CAN BUS' (READ WRITE 2.5Mb) -FLASH + MPC563-

#SMARTE2E3
id=46
[BOSCH MCC SMART 600/700cc] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BB- READ BOOT MODE PIN 24 FLASH TO MASS

#SMARTEDC15C
id=47
[BOSCH EDC 15C SMART] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#SUZUKI DELPHIJTD E4
id=217
[DELPHI DELCO DDCR SUZUKI] 'K-Line' (READ WRITE 128Kb) -FLASH ST10F275-

#SUZUKI_EDC16C3
id=131
[BOSCH EDC16C3-9 EURO 3] 'K-Line' (READ WRITE 1Mb) -FLASH 29BL802CB-
USARE TOOL SUZUKI KEY CODER DOPO SCRITTURA
ATTENZIONE!!! LETTURA & SCRITTURA ABILITATE PER TEMPERATURA MOTORE MINORE DI 50?C
LEGGERE GLI INIETTORI CON "INJECTOR CODER" PRIMA DI SCRIVERE
USE TOOL SUZUKY KEY CODER AFTER PROGRAMMATION
ATTENTION!!! READ & WRITE OPERATIONS AVAILABLE FOR ENGINE TEMPERATURE LESS THAN 50?C
READ INJECTOR WHIT "INJECTOR CODER" BEFORE WRITE

#SUZUKI KEY CODER
id=258
[KEY CODER EDC16C3] 'K-Line'
*** SEGUI ISTRUZIONI IN DOCUMENTS *** FOLLOW INSTRUCTION IN DOCUMENTS ***

#TOYOTA EDC16C10
id=208
[BOSCH EDC 16C10 TOYOTA] 'K-Line' (READ WRITE 1Mb) -FLASH AM29BL802-

#VOLVOD5EDC15C3_BOOT_MODE
id=92
[BOSCH EDC15C3 D5 VOLVO] 'K-Line' (READ WRITE 512Kb) -FLASH 29F400BT-

#VOLVOEDC16C31_6
id=170
[BOSCH EDC16+ C31 VOLVO] 'K-Line' (READ WRITE 2Mb) -FLASH M58BW016xB-
VEDERE DOCUMENTI PDF PER CONNESSIONI - SEE PDF DOCUMENTS FOR CONNECTIONS

VOLVO TRUCK LUCAS
id=69
[LUCAS VOLVO] CAN J1708 (READ WRITE 32Kb)

VOLVO TRUCK TRW
id=205
[TRW VOLVO] CAN J1708 (READ WRITE 64Kb)
VEDERE DOCUMENTI PDF PLUG DIAGNOSI PER CONNESSIONI - SEE PDF DOCUMENTS PLUG DIAGNOSE FOR CONNECTIONS
why for marelli 5sf mcU st10280 read 576 ko and not 512ko?

ominimicu

5th March, 2012, 12:46 AM

So anyone sells galleto 2 clone?

Drolet8758

5th March, 2012, 07:01 AM

:dontknow:does it work on newer cummins diesel engine with siemens ecm cm 2250 series

dottecu

6th March, 2012, 09:15 AM

my tool original is expired ,who know if existing patch for works free !thanks

chucky69

13th March, 2012, 10:00 AM

my tool original is expired ,who know if existing patch for works free !thanks

im interesting too, must be solution.

blackpirate

13th March, 2012, 10:17 AM

no solution for sw! needs hw modding!!!!!

z786

13th March, 2012, 11:43 AM

BP what version is ur galletto 2?

blackpirate

13th March, 2012, 12:46 PM

Do not confuse it!
its not new Galetto 2012 version! that isnt cloned yet!:P

its FG Galetto2 November 2011 sw!

youk

14th March, 2012, 03:28 PM

can you send my the link or price for the galletto clone 2
MP

jjrp255630

17th March, 2012, 11:16 AM

can you send my the link or price for the galletto clone 2
MP

hi friends, i know who have it, more details in PM

regards

ipejasinovic

17th March, 2012, 12:32 PM

We all know who have it, which one is best working, which one has best cable set, which one is best priced, but we should keep that for our self, because Mr. Galletto is really pissed off.

cp2010

17th March, 2012, 01:13 PM

Heavy Life !

z786

17th March, 2012, 01:15 PM

lol why wats he doing???

eprommazza

17th March, 2012, 01:15 PM

now all sellers galletto2 :celtictop:
price very high....
maybe another few money buy the original!!!
i know also this interface is different from original
i think any car not work

regards

Metin

17th March, 2012, 01:19 PM

only one interface is 1:1 with original but not from pt
i tested 3 different and one working very well

cp2010

17th March, 2012, 01:28 PM

___ :proud:

ipejasinovic

17th March, 2012, 01:58 PM

One of clones which I saw has better final quality build than original :D

zecas

17th March, 2012, 02:57 PM

FACT: know some guy that stopped making g2 and sold everyting and run away.

rummors say he had an gun pointed to his head

z786

17th March, 2012, 04:24 PM

he mustv got caught by the italian mafia lol

TribesMac

17th March, 2012, 05:06 PM

FACT: know some guy that stopped making g2 and sold everyting and run away.

rummors say he had an gun pointed to his head

Finally a good solution to stop cloning :lol:

moky

17th March, 2012, 07:11 PM

now all sellers galletto2 :celtictop:
price very high....
maybe another few money buy the original!!!
i know also this interface is different from original
i think any car not work

regards

i have got one from Pt since few months ,tested on lot of cars obd,bdm,tricore and work just like a charm..

wait report about new clones,project was sold

Stanton

17th March, 2012, 07:36 PM

Haha try explaining to the police:

MrX "but officer, he had a gun to my head for copying his programming device"
Officer "you copied his what?"

moky

17th March, 2012, 08:05 PM

out of subjet.....and not very interesting...sorry

zecas

18th March, 2012, 03:57 PM

i have got one from Pt since few months ,tested on lot of cars obd,bdm,tricore and work just like a charm..

wait report about new clones,project was sold

the project is being sold to as many people possible

D?j? vu

powertdi

19th March, 2012, 06:53 AM

Project alive but in another hands! Will test if it works like it was.:captain:

powertdi

19th March, 2012, 07:22 PM

Today I have test clone from "another hands" for my freind and I can sure everyone this clones works like original.
I have original and can compared on many cars.

moky

19th March, 2012, 08:00 PM

good news,small problem on first clone manufacturer is no cables,only obd2..so good idea if new clone complete with cables and adaptators bdm and tricore.. price more justified..!

What about this ?

.

powertdi

19th March, 2012, 09:15 PM

Yes new series have boot cables for Tricores and obd but w/o Bdm probes. Who need Bdm with this great tool?!:bounce: Most of cars w/o problem through EOBD. VW Crafter= No problem, Marreli= also no prob! Citoen,Peugeot,Fiat...= OBD also.

ipejasinovic

19th March, 2012, 10:17 PM

Yes, some have nice Tricore Boot Cable with device...

looly

20th March, 2012, 08:54 AM

Yes new series have boot cables for Tricores and obd but w/o Bdm probes. Who need Bdm with this great tool?!:bounce: Most of cars w/o problem through EOBD. VW Crafter= No problem, Marreli= also no prob! Citoen,Peugeot,Fiat...= OBD also.

So how much for this great clone?

bazare

20th March, 2012, 09:20 AM

As with any clone price got rapidly down. 1100 now.

eprommazza

20th March, 2012, 09:41 AM

maybe from 5-6 month price 200e

: Ahhhhh:

z786

20th March, 2012, 11:31 AM

if this clone had the 2012 features and cars i would consider buying

at the moment im stuck on what to buy mayb magpro is the way forward?

wud they add jap car obd soon?? are they good with new sprinter crafter obd?

vagtech1

20th March, 2012, 01:27 PM

I got a message that the current price is 900 euro.

ipejasinovic

20th March, 2012, 02:05 PM

Message from future? :D

vagtech1

20th March, 2012, 02:15 PM

In the future it will be 500 euro or less.

jejevfr

20th March, 2012, 06:05 PM

or did you find was 900 euros?

ipejasinovic

20th March, 2012, 09:39 PM

I would like to see picture or video of that 900 euro clone.

blacktoy

23rd March, 2012, 12:48 AM

deleted for some reason

z786

23rd March, 2012, 01:53 AM

price???????

blacktoy

23rd March, 2012, 01:55 AM

deleted for some reason

chucky69

23rd March, 2012, 10:36 AM

only via PM

you need clear your pm box, not possible to write you.

blacktoy

23rd March, 2012, 10:51 AM

Done now

Send again pm

Br

ipejasinovic

24th March, 2012, 01:16 AM

deleted for some reasons

blacktoy

24th March, 2012, 01:22 AM

deleted for some reasons

ipejasinovic

24th March, 2012, 01:26 AM

deleted for some reasons

blacktoy

24th March, 2012, 01:30 AM

deleted for some reasons

ipejasinovic

24th March, 2012, 01:34 AM

deleted for some reasons

blacktoy

24th March, 2012, 01:39 AM

deleted for some reasons

ipejasinovic

24th March, 2012, 01:42 AM

deleted for some reasons

ipejasinovic

24th March, 2012, 12:14 PM

deleted for some reasons

blacktoy

24th March, 2012, 12:19 PM

Will send in the evening

ipejasinovic

24th March, 2012, 12:22 PM

deleted for some reasons

VAGR666

24th March, 2012, 01:23 PM

deleted...

blacktoy

24th March, 2012, 01:29 PM

deleted for some reasons

VAGR666

24th March, 2012, 02:57 PM

deleted...

blacktoy

24th March, 2012, 10:03 PM

deleted for some reasons

exxl

25th March, 2012, 12:23 AM

but tell me one thing that is not logical for me, if you say that the bosnian clone or from where-ever it is, is not working, why dont you send it back for replace? or get your money back? why do you buy other one ? or you have enough money to have couples of it just to try out?

i mean you are talking about people that they are beginners who tries to make money so we could think you are professional or what?

my friend i think you have some interest in this topic and i think you want to make some clones to look bad for what ever interest reasons you have.

i just replied to this topic because i have the same box and look at this video the k-line is working what a wonder, bdm is working boot mode is working everything i try out is working, so i think your story sucks

and i see on photo you sticked off the warranty stickers, you upgraded or downgraded some elements inside the box? to show people it is not working?

i think this video is telling more then any word here:

gal k line - Kostenlose hochqualitative Videospeicherung - Upload and share your videos (http://www.vidup.de/v/ORnwC/)

blacktoy

25th March, 2012, 02:41 AM

deleted for some reasons

Novik_UA

25th March, 2012, 01:15 PM

This clone makes checksumms for EDC17/MED17, or only read/write it ?

blacktoy

25th March, 2012, 01:35 PM

make also the checksums

blackpirate

25th March, 2012, 01:43 PM

I didn't tell serial because i couldn't imagine whatfor you need it (it is irrelevant normaly).

this is the famous box from bosnian guy -> attachement

br
Than clone was tested by a friend from Germany!!!

All works fine!!!!!!!!!!!;)

powertdi

25th March, 2012, 02:30 PM

Me tested too. works fine. EDC17CP20 , like original.

mamanacusa

25th March, 2012, 02:38 PM

I would like to see all those supposed to be working and cheap prices cloned tools making BDM CRAFTER ECU, SIEMENS ECU, MARELLI ECU :) Oh... also K-line boot mode ST would be lovely to see as showing 1 unit working doesn't mean nothing.

I had myself one of those units and to be honest, i got ride of it as soon as i could. Having none, a bad copied hw cloned is useless just because knowing that even legal tools have bugs... Bugs of bugs... no way, an ecu costs money!

Stop the war about flames, show things working!

ipejasinovic

25th March, 2012, 02:41 PM

does anyone know a good source for EVC BDM probes?
EVC BDM probes work OK with Galletto v2? Where did you get that info?

gezame

25th March, 2012, 03:17 PM

EVC BDM probes work OK with Galletto v2? Where did you get that info?

Hi
Bdm new galletto, use the same pin-out i work as bdm to EVC (bdm CMD use reverse pin-out).
See instruction manual for bdm new galletto and compare to EVC.
Regards.

blacktoy

25th March, 2012, 03:27 PM

the benefit of EVC probes is that you don't need Galetto2 -> CMD BDM probes adapter

ipejasinovic

25th March, 2012, 03:40 PM

Nice to know :)

serguei

25th March, 2012, 03:42 PM

Galetto2 -> CMD BDM probes adapterBlacktoy you have pinout of the adapter?

blacktoy

25th March, 2012, 03:51 PM

not yet will have in around one week ready adapter

moky

25th March, 2012, 04:13 PM

here pinout of my galetto clone,Someone have pinout of evc bdm please to compare ?

thx !

http://nsa21.casimages.com/img/2012/03/25/mini_120325052503956168.jpg (http://www.casimages.com/img.php?i=120325052503956168.jpg)

ipejasinovic

25th March, 2012, 04:20 PM

Here it is

jejevfr

25th March, 2012, 06:59 PM

where you found your galletto 2?

blacktoy

25th March, 2012, 10:02 PM

deleted for some reasons

z786

25th March, 2012, 10:19 PM

why dont u tell your "sources" to have a look at the version2012 and clone that, the ones you have are limted upto 2012 and no doubt have bugs etc

exxl

25th March, 2012, 10:35 PM

have seen that clone, i opened the box same elements inside like in the other black box, cant be that this box can work better then black box, all same elements inside.

blacktoy

25th March, 2012, 10:55 PM

deleted for some reasons

exxl

25th March, 2012, 11:11 PM

deleted for some reasons

blacktoy

25th March, 2012, 11:23 PM

does anyone tested Delphi ECU on Mercedes Benz W204 with BDM of Galetto 2 (clone or ori)?

br

exxl

25th March, 2012, 11:29 PM

deleted for some reasons

spiridonas

28th March, 2012, 06:46 AM

Hi guys i want to buy one a FG Tech Galletto 2 clone please i need link from serious site.
Many thanks in advance.

Metin

30th March, 2012, 12:10 AM

try find on ebay

Rito

30th March, 2012, 12:27 AM

All pepople know where bay gallet2..
Is not possible post here??
I know two site... But I see many post?s "delete for some reason"
Why ???

ipejasinovic

30th March, 2012, 08:11 AM

It's not allowed to post links. Post where deleted due to unnecessary flame...

yas200979

30th March, 2012, 08:41 AM

Can someone give me a link to buy.

powertdi

30th March, 2012, 09:51 AM

Alexandr pm me.

moky

30th March, 2012, 04:00 PM

does anyone tested Delphi ECU on Mercedes Benz W204 with BDM of Galetto 2 (clone or ori)?

br

I have one to do too..someone tested Delphi dcm 3.2 with bdm galetto

if you have pinout please..

many thx

Rito

30th March, 2012, 04:07 PM

PM to me I send link...

moky

30th March, 2012, 04:33 PM

I search bdm cable and probes for galetto 2 if someone know where i can buy it

thx !

yas200979

1st April, 2012, 10:24 AM

Who knows where to buy cheaper in 1100euro?

tuningschool

1st April, 2012, 11:06 AM

If someone want give me offert for CLONE 2 i need more pz.

But only chepaer than 1.000 euro.

ipejasinovic

1st April, 2012, 01:09 PM

You can only get non working clone cheaper than 1300 euro.

filoxio

1st April, 2012, 04:17 PM

my friend bought for euro 1300 , and works very well!
if anyone is interested I can tell you where to buy...

eprst

1st April, 2012, 07:50 PM

my friend bought for euro 1300 , and works very well!
if anyone is interested I can tell you where to buy...

could you please give me the link?

moky

1st April, 2012, 08:00 PM

which version of software with this clone ?

blackpirate

1st April, 2012, 08:23 PM

guys what i can tell for sure about it its this:
My partner clones sw expire in 2022 april!;)
works 100% ! no issues!
(i heard that portugal clones that have some problems!)

its your call from where you buy, but first ask the seller all the question and aslo to provide proofs that everything works as its should be!!!

my 2 cents...

glk96000

1st April, 2012, 08:42 PM

any pictures?.

filoxio

1st April, 2012, 10:28 PM

which version of software with this clone ?
the version is FW48

filoxio

1st April, 2012, 10:33 PM

could you please give me the link?

http://img96.imageshack.us/img96/1370/2222zn.jpg

contact me and give you his contact

Metin

1st April, 2012, 10:58 PM

i tested this box and not working with all ecu,
bdm and edc16 ok but yesterday i tested with bmw edc17, silver box have problem with comunication, black box read and writing ok

vlk69

2nd April, 2012, 12:54 AM

:playingball: Is your choice to buy product like "HUGO BOOS" or "HUGO BOSS"...

mislav88

2nd April, 2012, 01:12 AM

vlk69 wtf is wrong with you, not so long time ago you were asking for a licence of some cracked sw, and now you are writing opposite in several threads. are you employed in FGtech or alientech in the meantime?

powertdi

2nd April, 2012, 06:35 AM

As I understand we have 2 paraller projects of Fgetech clones here. I have test just one solution( black box) and find some k-line porblems and chks correction. My seller told me it was a SW problem, not HW. Now it its solved.
So wait for tests no.2

blacktoy

2nd April, 2012, 01:54 PM

@metin: please send me a picture of the backside of silver box via pm

I have also testet edc17 bmw x3 with silver box and it worked

Till now no edc17 problems has been reported (for both boxes black and silver) -> can bus

Black and silver box are nearly identical (i don't write 100% because i don't know which mods has been made on black box since i have looked last time on a black box)

Contact me via pm if you want have infos for galetto -> cmd bdm adapters

raszkiewicz

2nd April, 2012, 08:18 PM

Buy GALETTO 2 100% working 1250euro message to PM.
GREETS

raszkiewicz

2nd April, 2012, 08:19 PM

With wholesale price negotiation quantities :)

PremierD

2nd April, 2012, 08:30 PM

Anyone else unsure about the no trading rule?

worldofchiptuning

4th April, 2012, 10:48 AM

i tested this box and not working with all ecu,
bdm and edc16 ok but yesterday i tested with bmw edc17, silver box have problem with comunication, black box read and writing ok

mmm
for me you don't have tested well

tirlibibi

4th April, 2012, 11:20 AM

1200e what a joke for a clone ! wait 6 months it will be 100e !

Stanton

4th April, 2012, 01:36 PM

Yes, once it's been raped by Chinese who use poorer quality components, can't supply licence / crack, and don't have a clue what they sell.

faiscamix

4th April, 2012, 02:17 PM

Bad clones nice for business

moky

4th April, 2012, 02:23 PM

1200 euros is a good price if 100% working,it's a good hardware,I pay more for mine but 6 months ago and I'm not worried when i work...! (obd/bdm/tricore)

yas200979

4th April, 2012, 06:25 PM

Can anyone share - a good tool. Works 100%?

powertdi

5th April, 2012, 10:34 PM

I heard alubox from Ireland very nice w/0 bugs like black one.
Here is screen of bugs( black unit) after BDM flash and car dont start and picture alubox from Irish guys. :wink:

youk

7th April, 2012, 09:43 PM

can you send me the software in mp

macxlulu

7th April, 2012, 10:14 PM

hello i have orginal ABT Flasher edc16 edc17 -c3Flash ,but this is slave version - propably hardware is this same as galletto
someone knows something about this?

masterb

8th April, 2012, 08:34 AM

who can share more info about the different clones ?
which one work now 100% right ...

br

kiwi1hu

11th April, 2012, 10:30 PM

Hi all!

Interest me working 100% GAlletto 2 clone!

If you have please write private mail.

now black box or alu box is correct?

thx

BR

moky

12th April, 2012, 07:40 AM

post edited sorry

Metin

13th April, 2012, 06:59 PM

picture black box from car-prog
i tested on some ecus and ok

blacktoy

14th April, 2012, 02:47 AM

hp of car-prog seems to be down?
does anyone have any info regarding this?

pencho

14th April, 2012, 10:55 AM

Hello Metin;
black box work TRW Volvo P01 P02 P03 P04 ?

Metin

14th April, 2012, 01:51 PM

i not tested volvo

tellfaia

18th April, 2012, 09:09 AM

could someone please share link trough pm from galletto2 :)

pablo1971

18th April, 2012, 07:14 PM

me too...a link and price in pm please.

pencho

18th April, 2012, 07:28 PM

please share link and price in pm .

exxl

19th April, 2012, 03:59 PM

i want only to suggest you to be carefull with galetto buying now on market are 3 different galettos, 2 of them have not good hardware i can tell from experience, it cant read any edc16 on k line or it makes id only or sometimes it beginns to read but fails on reading everytime, this galettos with this hardware bug have bad k line and you will not even can do 60% of cars with k line also bdm bugs has this two type galettos.

be carefull when buying, seller should asure you with video or something that it can work with edc16u1 or u34 on k line read and write if it cant then you can be sure in bad hardware, most of seller will claim that this is sofware bug or firmware bug, but you can belive me it has nothing do to with software or firmware it is just bad hardware :)

only one type hardware on market of galetto is complete deal so watch out and dont throw money away for half working device.

ipejasinovic

19th April, 2012, 05:48 PM

This guy bought device same as mine:

Galletto v2 Clone - VAG EDC16U34 - K Line Test - YouTube

BTW, how can I record video like this one?

moky

19th April, 2012, 06:57 PM

a simple mpps can do it,did you test on last processor in tricore boot? and others more recent ecu ?

ipejasinovic

19th April, 2012, 07:01 PM

Yes, I tested, but don't know how to record video like this. I can record with phone, but not good quality.

moky

19th April, 2012, 07:05 PM

I think original fgtech have problem too on this ecu,i've got first quality clone from port..l and never had problem (bdm ,last tricore processor etc..) but some U31/34 don't work here too..(not all) only problem I had so...

Metin

19th April, 2012, 07:07 PM

a simple mpps can do it,did you test on last processor in tricore boot? and others more recent ecu ?

tricore working ok
see: carprog2010 - YouTube (http://www.youtube.com/user/carprog2010)
i have the same box, tested personaly some ecus vag, bmw, psa and all ok

moky

19th April, 2012, 07:08 PM

I know metin i work with it since 8 months (other manufacturer of course) but what about this new clones..video is simple to do...be careful

.

ipejasinovic

19th April, 2012, 07:09 PM

@Metin
Did you test version from carprog on EDC16U34? Or EDC15P? In car?

Metin

19th April, 2012, 07:13 PM

I think original fgtech have problem too on this ecu,i've got first quality clone from port..l and never had problem (bdm ,last tricore processor etc..) but some U31/34 don't work here too..(not all) only problem I had so...

i think that problem is in PC, Windows or software have bad timeout communication
i read few EDC16u1, u34 but not working on every PC
edc15 not tested yet, (this museum :) ) and working with old galletto

exxl

19th April, 2012, 07:15 PM

its not a problem of PC this is a lie :)

you cant read any edc16u1 or edc16u34 on K-Line because of bad hardware and bad k line
even not some simple edc15 from inside car and few more ecu dont need to mention now just mention the most one that occures

i can lean you my clone device it will work on every pc and you know why it will work on every pc ?

because it has no hardware bugs like this :) and its a complete device not half working device

moky

19th April, 2012, 07:15 PM

possible,never tested on other pc..

blacktoy

19th April, 2012, 07:18 PM

hi,

another question:

did anyone test the following:

- VAG Tools: set Counter EDC16
- Renault Tools: Injector Coder CAN
- Renault EDC16 CP33/C36

br

moky

19th April, 2012, 07:19 PM

its not a problem of PC this is a lie :)

you cant read any edc16u1 or edc16u34 on K-Line because of bad hardware and bad k line
even not some simple edc15 from inside car and few more ecu dont need to mention now just mention the most one that occures

i can lean you my clone device it will work on every pc and you know why it will work on every pc ?

because it has no hardware bugs like this :) and its a complete device not half working device

you want i send you list of ecu i do with mine? 2000 to 2011 all process and only this "small" ecu take problem..so..

ipejasinovic

19th April, 2012, 07:24 PM

All clones working OK on CAN and Tricore, but why pay 1300e for not fully working clone instead 1250e for fully working clone?!

exxl

19th April, 2012, 07:25 PM

this is not a small problem

vag edc16 over k line finish in 3 minutes everything

vag edc16 over can can take with galetto more then 30 minutes

you think this is small problem when battery goes flat or you have to wait?

this is maybe not problem for amateurs and people who like half working devices but for some professionals it is sure a problem

and you cant do edc15p from golf 4 inside car you can do it only on bench, you think for a professional it is good to take out ecu from car and do on bench?

my device that i have bought does golf edc15p from car my friend.

and this is belive me not a small problem on other clone galettos this is big problem, professionals will know what i mean.

why give money for a solution that you never know when and where it will work when you have a chance to have a solution that will work anywhere :)

at least i have laugh here a little bit :) pc problems on edc16 k line change pc :) ahhaha

moky

19th April, 2012, 07:27 PM

ipejasinovic, I have cmd obd official too and sometime i have problem on simple ecu....so why paid for that ? :D

ipejasinovic

19th April, 2012, 07:29 PM

Yes, why? :D

Metin

19th April, 2012, 07:31 PM

its not a problem of PC this is a lie :)

you cant read any edc16u1 or edc16u34 on K-Line because of bad hardware and bad k line
even not some simple edc15 from inside car and few more ecu dont need to mention now just mention the most one that occures

i can lean you my clone device it will work on every pc and you know why it will work on every pc ?

because it has no hardware bugs like this :) and its a complete device not half working device

not true, maybe you use 2 good pc :)
my friend have original box form 2011y. and have the same problem
i get photo orig. pcb and all componnent, pcb is the same

moky

19th April, 2012, 07:31 PM

Ip,you know...:D

exxl

19th April, 2012, 07:32 PM

i can try on my 5 lap tops on my friends lap tops and everywhere it works

please metin dont lie to people too much is not good :) just admit to yourself that you have bad hardware and you will see you will feel much better :)

moky

19th April, 2012, 07:33 PM

this is not a small problem

vag edc16 over k line finish in 3 minutes everything

vag edc16 over can can take with galetto more then 30 minutes

you think this is small problem when battery goes flat or you have to wait?

this is maybe not problem for amateurs and people who like half working devices but for some professionals it is sure a problem

and you cant do edc15p from golf 4 inside car you can do it only on bench, you think for a professional it is good to take out ecu from car and do on bench?

my device that i have bought does golf edc15p from car my friend.

and this is belive me not a small problem on other clone galettos this is big problem, professionals will know what i mean.

why give money for a solution that you never know when and where it will work when you have a chance to have a solution that will work anywhere :)

at least i have laugh here a little bit :) pc problems on edc16 k line change pc :) ahhaha

there is here more professional that you think but some pro like to play with clone,it's normal doctor ?

exxl

19th April, 2012, 07:37 PM

moky i know exactly who you are and what interest you have in this thread and it is ok its not bad to have interest but it is bad when you will convince people in something that is not true and in this case this is the k line problem on some galetto clones, you cant go over this problem and tell people its good.

till now only one clone producer has everything put together like it should be.

blacktoy

19th April, 2012, 07:45 PM

a stupid question but:

vag edc16 over k line finish in 3 minutes everything

vag edc16 over can can take with galetto more then 30 minutes

isn't CAN normaly faster than KLine -> so why galetto makes it with kline faster than with CAN?

further how is it possible to make a CAN ECU with KLINE protocol?