PDA

View Full Version : needed immo off for siemens ecu T4



haroutioun
24th August, 2011, 07:56 AM
Hello Dear friends,
plz can any body have idea about vw transporter 98 year, 2.5 ?
i need to turn the ecu immo off .
Siemens 5wp4 (1 plug, 023 906 025 A) i get inside ecu eeprom 93c56, is right it must this is the eeprom 93c56?
so plz if can any body give me solution about this....
thank you....

sogaro
24th August, 2011, 09:27 AM
Try this or post dump immo box if this does not work

haroutioun
24th August, 2011, 11:28 AM
Try this or post dump immo box if this does not work
--------------------------------
Hi,
Dear thank you for your dump & reply, i try to write your dump but it be the same the car do not start,
my costumer buy the car without immo box ,so please did you have solution from ecu immo off ?
thank you (sogaro)

nany
24th August, 2011, 06:04 PM
Hello Dear friends,
plz can any body have idea about vw transporter 98 year, 2.5 ?
i need to turn the ecu immo off .
Siemens 5wp4 (1 plug, 023 906 025 A) i get inside ecu eeprom 93c56, is right it must this is the eeprom 93c56?
so plz if can any body give me solution about this....
thank you....


Hi , my friend try with this 76792
and post reply

haroutioun
24th August, 2011, 07:14 PM
Hi , my friend try with this 76792
and post reply
------------------------------
Dear friend,
thank you for your care, but your dump the same like our friend (sogaro)
i try to load this dump but the car do not start still immo on.
so i am waiting to news about this ecu,
thank you....

damih
24th August, 2011, 07:26 PM
Hello Harout

Do you have a flash 27C256 in ecu ?

haroutioun
24th August, 2011, 08:08 PM
Hello Harout

Do you have a flash 27C256 in ecu ?
-------------------------------------
Hello damih,
no my friend, ecu do not show (27C256) only with eeprom 93c56 & the ecu is siemens
so i dont know how it must to do immo off.if i dont get immo off solution, my idea is to install
emulator or i buy immobox after readapt.....

damih
24th August, 2011, 08:22 PM
Hello,yes best way use an emulator and job done

sogaro
24th August, 2011, 09:41 PM
The ECU has a flash, it should be 27F010 or so. I believe you can use an immo box and then do off from it. Got a similar one today and i will do off on immobox. I will get back with good news hopefully.

haroutioun
24th August, 2011, 10:12 PM
The ECU has a flash, it should be 27F010 or so. I believe you can use an immo box and then do off from it. Got a similar one today and i will do off on immobox. I will get back with good news hopefully.
--------------------------------------------------
our friend, in the board of ecu do not show me (27f010) i see eeprom 93c56 .
i wont to do immo off this ecu because the car he dont have immobox , so i dont know if he have another kind of flash to read from??? to get immo off is any body have photo for flash (27f010) maybe can help me to know which one is the flash. we try off dump by eeprom 93c56 but no rezult , so i try to wait till tomorrow if i dont get rezult i must to install immobox after readapt.
in the end i am very thankfully for my all friends in DK which try to help me about my problem...

damih
24th August, 2011, 10:14 PM
Post picture of ecu

sogaro
24th August, 2011, 10:23 PM
Look for a chip that has 9 legs on either sides and also 7 legs on either sides. maybe its written in a generic name.

damih
24th August, 2011, 10:29 PM
sorry here

damih
24th August, 2011, 11:25 PM
Hello Harout

try this last dump

haroutioun
25th August, 2011, 08:08 AM
Post picture of ecu
-----------------------------
Hi,
this is the picture of my ecu ...
thank you...

haroutioun
25th August, 2011, 08:53 AM
Look for a chip that has 9 legs on either sides and also 7 legs on either sides. maybe its written in a generic name.
------------------------------------------
My Dear Friend
The moment you sent me your mail I was away from my workshop.
So, today I checked the ECU and found the flash with 7 legs + 9 legs on the ecu board (27F010)
As I don't have the adapter for this flash to read I'm obliged to buy the Immobox
Thanks in advance for your kind help
Best Regards

haroutioun
25th August, 2011, 08:59 AM
sorry here
-----------------------------------------
Dear Damih
The picture you sent me was very useful.
thanks

sogaro
25th August, 2011, 09:27 AM
in another few hours i will let you know how the immobox option works.

haroutioun
25th August, 2011, 09:49 AM
in another few hours i will let you know how the immobox option works.
---------------------------------------------------
ok thank you ,
i have 1 more question about immo off for this ecu ,
it most read the 93c56+27f010 to get immo off? or only by flash
27f010?

sogaro
25th August, 2011, 05:55 PM
I did immo off for mine, used Immobox