Seat leon 1.9 - 2001 TDI Aura CD radio problem

[hacko12]

I have problem with Seat leon 1.9 - 2001 TDI - Aura CD radio show ERROR 1. I change millage with VAG K+CAN Commander Full 3.6 and after success change km in dash and motor ecu on the radio show ERROR 1. Someone please help me how to fix problem...

[M1DJF]

Read the radio EPROM and upload dump here so we can reset the timer in the EPROM.

[murat332]

I have problem with Seat leon 1.9 - 2001 TDI - Aura CD radio show ERROR 1. I change millage with VAG K+CAN Commander Full 3.6 and after success change km in dash and motor ecu on the radio show ERROR 1. Someone please help me how to fix problem...
hello friend
inside the radio and read the eeprom

[lupu_sandu]

ERROR1 = empty eeprom or FF in place of the code

Do as advised.

[hacko12]

Read the radio EPROM and upload dump here so we can reset the timer in the EPROM.

With what tool to read eprom with my VAG K+CAN Commander Full 3.6 or i need something else? I can read full eprom from ECU and Instrument/immobiliser witch one to upload??

[hacko12]

hire is.. someone explain me more im new and i dont understand everything.. Thank you!!

[lupu_sandu]

Read eeprom from CD-Player using an eeprom programmer.

[hacko12]

What i need to do exactly did i need take off the radio from the car and conect to other programmer diferent than mine vag k+can or how? hot to do explain more please..

[skyline-GTR]

exactly u must remove radio from car and write from label datas about radio then u will get what need made with radio

[hacko12]

exactly u must remove radio from car and write from label datas about radio then u will get what need made with radio

I have a original user manual of Radio Acura CD also have a radio card with serial no. SEZ2Z6B1672037 and code no. 1017 what alse u need? Im new in this and i dont understend everything and i dont know how to read eeprom from CD-Player using an diferent eeprom programmer then what i have vag k+can 3.6 someone plese explain more thank you!!

[skyline-GTR]

need remove radio, disassemble and find one small chip with 8 pins on him writed 24lc16, 24c16 or just c16 but for that u will must have some programmer cant do that job with your k+can or find local decoder who will solve that job

[murat332]

radio in the 8-pin mini-24LC16B
To read the eeprom :
http://www.lancos.com/e2p/si-prog-v2_2.pdf
PonyProg2000 - Download page (http://www.lancos.com/ppwin95.html)
use ponyprog :vollkommenauf:

[hacko12]

For everyone who have the same problem there is Aura cd dump..

seat aura cd Service Manual free download,schematics,datasheets,eeprom bins,pcb,repair info for test equipment and electronics (http://www.eserviceinfo.com/download.php?fileid=28699)

[vladim1]

Hello,

Seat Aura V4
1M0 035 186F
SEZ2Z6

Error1 on display, reset counter does not help, please repair this dump.
Thank you

[shooting]

Hello,

Seat Aura V4
1M0 035 186F
SEZ2Z6

Error1 on display, reset counter does not help, please repair this dump.
Thank you

Re-Solder the chip.., error1 is common with bad soldering

wbr

[vladim1]

Unfortunately it dont help.

[shooting]

Unfortunately it dont help.

Maybe component is missing after soldering, post picture of your chip and area

wbr

[vladim1]

Underneath the little label the link was broken, fixed, everything works well now, thank you shooting.