skoda octavia pin from dash

[huzzen27]

Hi group,
can any one help please to extract the pin from dash dump for skoda octavia 2,dash eeprom 24c32,regards and thanks in advance-Huzefa
:wink:

[cjawahir]

cant see any vin and pin in this dump , did you read with xprog -m ?

please try again .

cj

[lupu_sandu]

AFAIK, only thru OBD2 you can read pin code.

[cjawahir]

hi all , i read same chip on 2007 model and was able to get pin from this site , here is the file you can check it your self .

i try to do the same with your file but gets error .

ELDB Electronics (http://www.eldb.webuda.com/calc_vdo.php)

cj

[huzzen27]

hi all , i read same chip on 2007 model and was able to get pin from this site , here is the file you can check it your self .

i try to do the same with your file but gets error .

ELDB Electronics (http://www.eldb.webuda.com/calc_vdo.php)

cj

pleae check the dump i have attached recently

[pinkfloyd5eg]

data is encrypted , you have to decrypt it first , you may try this online calculator >> http://www.digital-kaos.co.uk/forums/images/styles/digital/statusicon/thread_hot.gif ONLINE CALCULATOR FOR ENCRYPTED DUMPS ,TRY IT!! (http://www.digital-kaos.co.uk/forums/f174/online-calculator-encrypted-dumps-try-212897/) :questionmark:
Good luck.

[huzzen27]

Hi group,
can any one help please to extract the pin from dash dump for skoda octavia 2,dash eeprom 24c32,regards and thanks in advance-Huzefa
:wink:

Hi, My dump is corrupted and it shows error in display i forgoten to keep the post regarding this so please any one can repair it or modify it,thanks in advane,regards-Huzefa

[pinkfloyd5eg]

Hi, My dump is corrupted and it shows error in display i forgoten to keep the post regarding this so please any one can repair it or modify it,thanks in advane,regards-Huzefa

hiya mate ,, read 24c32 again by UPA or any other good programmer then try that online calculator again , but keep in mind that it works only for micronas CDC 3272 + 24c32 clusters , It will work with golf, caddy, touran, octavia etc. partnumber must be xxx920x5x
VDD should work all 3HL only some.

so, the best way for those vag cars with micronas or NEC + 24c32 or 24c64 is to use an OBD programming tool ,, there are some good tools for this purpose have been discussed on DK-Dashboard forum ..
have a good day everyone :ciao:

[cjawahir]

Hi, My dump is corrupted and it shows error in display i forgoten to keep the post regarding this so please any one can repair it or modify it,thanks in advane,regards-Huzefa

hi , does the vehicle still start ? you can use my dump but you still need the old pin to adapt the dash .

cj

[huzzen27]

hi , does the vehicle still start ? you can use my dump but you still need the old pin to adapt the dash .

cj

ya it starts but dash shows error on it