Chip-tuning for Alfa 156

[BALOO]

Hi guys, I'm newbie regarding chip-tuning Galletto own cable, just do not know how. I want to try Alfa Romeo 156 1.8 TS, I have the files, only how to recognize which is the right one. Furthermore, I do not know how it will behave immo. Thank you for your help:questionmark::stupido3:

[brchip]

Hi guys, I'm newbie regarding chip-tuning Galletto own cable, just do not know how. I want to try Alfa Romeo 156 1.8 TS, I have the files, only how to recognize which is the right one. Furthermore, I do not know how it will behave immo. Thank you for your help:questionmark::stupido3:

What year is you car? Which ECU, M155? No problem with immo, it's stored in another eprom, just be careful with files that you found in the web. You need to flash it with the correct file, if the file is wrong or corrupted you could lock the ECU. But if this happens, I can still help you.

[BALOO]

It is the year 1998, so Bosch 1.5.5, those files I got the cable, but I do not know according to what are known as ECU programming should be on the table, or just join Galletto

[atd]

You can search ori file by the same SW and HW numbers or read it by your interface selecting brand and engine, then make a mod (or somebody can do it for you for money or free - it depends). Writing the same way. If you have mod files, you can download Winols here on dk forum, use it to recognise your files, do checksums and compare with your original. The safest way is to read ecu on the table with programmator and you will have full flash then. If you will block ecu by the file with bad cks, you will have full orig file to repair ecu... Obd flasher don't read full file area.

[brchip]

You cannot read the M.155! It's write only, so you need to find the ori file. Tell us the HW and SW numbers and we'll try to help.

[BALOO]

Ecu info:
DEVICE INFO:
Fiat drawing number: 46739435
Hardware number: 0261204947
Hardware version: 00
Software number: 1037359649
Software version: 0204
Homologation number: 932_18
ISO code: FE86839773
Programming date: 07/01/1999

I have winols 1.721, how to work it?
File it?s ok?

[atd]

Sure, I wrote overall how does it look like - like for newbie ;)
Here I have something... Check this!
BALOO have you bought original Winols 1.721 or downloaded somewhere?

[euroscan]

- 156_18 or 932_20 -- http://img89.imageshack.us/img89/7199/baloo.th.jpg (http://imageshack.us/photo/my-images/89/baloo.jpg/) -- http://img847.imageshack.us/img847/655/akaf.th.jpg (http://imageshack.us/photo/my-images/847/akaf.jpg/) -- http://img716.imageshack.us/img716/828/aka2q.th.jpg (http://imageshack.us/photo/my-images/716/aka2q.jpg/) --

[BALOO]

winols I downloaded, just do not know what there is to be monitored and adjusted. Inadvertently from it live, you only need to make their own cars, I have Alfa GTV 2.0 TS Alfa GTV 2.0 V6TB and Opel Vectra 1.8 16V. These vehicles, I would actually try to do, that Alfa 156 is your friend and we have to do a lot of things, so it is suitable for experiments

[oem]

If you want best tuning file for your car PM me. I have maked tune this cars on dyno with best AFR, without knock-ing for +12 hp at 6700 rpm and +24Nm.

PM me for best price!

You cannot flash on the table. If your immo not work i will say how to flash on the table. :) You must open ECU.

P.S. Look my avatar :) My tuning cars are 70% Alfa Romeo. I love this cars and i have best of the best 100% tested on dyno and meassured AFR, and knocking. I make tune at maximum of this engine when he is stock.