autocom cdp 2011 vci no found

[sidj]

help autocom interface no found

[argegsm]

help autocom interface no found

check other forum i write answer first hardware connect to car and connect usb cable to pc check in automotic mode...if you are write tiny45 you must make any false same problem i see tiny45 dump fault but i think problem connection

[argegsm]

usb cable led light green vci not found... must light red when connect usb cable

[sidj]

I tried everything

[argegsm]

I tried everything

maybe hardware problem burn any component or bad solder

[argegsm]

are you try with bluetooht

[sidj]

no try with bluethoot

[argegsm]

try with bluetooth easy bluetooht pass key 0000

[argegsm]

if not find same problem have hardware problem send back supplier and change it

[Meat-Head]

try with bluetooth easy bluetooht pass key 0000

rumor going around says 0 (one zero) is the code

[xrhstaras77]

Connect usb cable, go to VCI connection, select manually, select COM port end ok! After select update firmware (only with cable). Finish!

[xrhstaras77]

The key is 0000 no only one 0 (for bluetooth)

[Meat-Head]

The key is 0000 no only one 0 (for bluetooth)

not going to argue - go to top of programme - ~~~~s knows where, click something .pdf files, read it tells how to make the bluefish work

[cipijoint]

ive met that problem too. i want to settings, and choose manual port, VCI port . before was automatic and vci not found.

[Meat-Head]

POST CLOCKING:-

The orginal plays up like this, so nothing new there then

[k1champion]

C:\Documents and Settings\All Users\application data\autocom
C:\Documents and Settings\Admin\application data\autocom
delete folders uninstal autocom install again
activate and you are done i have the same problem and i solved.

[slubberkop]

my bleutooth key is 1234