View Full Version : Trouble with Cummins Genset - Urgent
singleperson
29th August, 2011, 10:36 AM
Dear All,
Please help me, please help me.
Now I use 2 Genset C2250D5A - PCC3201. I want to synchronize between 2 Gensets & Utility.
Can you help me?
Does anybody have the diagram to connect between 2 Gensets & Utility to synchronize.
Thanks.
jctech
29th August, 2011, 12:18 PM
The installation manual for these gensets is in the CPG quickserve DVD that you posted.
singleperson
1st September, 2011, 03:47 PM
Hi mate,
Do you have any experience with PCC3201?
I have problems when I operates 2 Genset 2250KVA synchronization together after these Genset must synchronize to Utility during 5 s.
I read Service manual but it doesn't show how to connect or control.
Does anybody know this problem?
Please help me. Thank so much.
jctech
2nd September, 2011, 07:38 PM
Hi mate,
Do you have any experience with PCC3201?
I have problems when I operates 2 Genset 2250KVA synchronization together after these Genset must synchronize to Utility during 5 s.
I read Service manual but it doesn't show how to connect or control.
Does anybody know this problem?
Please help me. Thank so much.
Never had to install a set with PCC3201, they are always set up by the time I get to work on them
singleperson
3rd September, 2011, 03:44 AM
Dear mate,
Can you explain clearly? To syn 2 Genset to Utility.
At first, I will syn 2 Genset. After that I will syn to Utility, won't you?
What signals or what terminal cause Genset unsderstand that Genset will syn together or 2 Genset syn to Utility????
Thanks
Poptest
17th September, 2011, 11:15 PM
Dear mate,
Can you explain clearly? To syn 2 Genset to Utility.
At first, I will syn 2 Genset. After that I will syn to Utility, won't you?
What signals or what terminal cause Genset unsderstand that Genset will syn together or 2 Genset syn to Utility????
Thanks
Did you succeed in syncing these?
singleperson
18th September, 2011, 12:12 AM
Dear All,
Does anyone have the software or drawing or instruction to syn many gensets & Utility?
Please help me. Thanks
jctech
18th September, 2011, 02:26 PM
As I understand the PCC system, the gansets all start, the first one to a stable rated speed syncs to the utility grid, the remaining sets then sync to the first set.
below are the links to the PCC3201 manual. hope its helps
https://rapidshare.com/files/996211292/0908-0104v1.pdf
https://rapidshare.com/files/1141984030/0908-0104v2.pdf
singleperson
18th September, 2011, 10:48 PM
Dear Mate,
Thank you very much for your help.
Do you have any drawing or any instruction to syn many gensets & Utility, using PCC3201?
Please help me.
Thank you
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.