A3 2.0 TDi hotstart issue

[levisdj]

So i read the file from the car, I fixed it with Carsoftware 5.0 saved the file, corrected checksum with winols... I wrote the file into the ecu, at 100% writing with MPPS it gave : Routine not complete.Car didn't start, wrote back original file... all back to normal.Can someone figure out what's the problem? I post the orig and hotfix file for comparison.

[ecutuners]

Use galletto it will be fine

[atd]

Here is full read. Hotstart fixed. Try this.
It's 100% ok. I had the same troubles with older mpps but car started everytime. Try few times writing... It helps ;)

[monitel_service]

this is your file