PDA

View Full Version : 2003 Dodge Sprinter 3500 2.7 Disel Turbo


alexG
31st August, 2011, 09:21 PM
Hi to all .
Need help my ECU on sprinter bad .Use DRB3 can not read it .
Install other ECU with same Ser# number .
Can not start the van.
Shows start error . I found eprom inside 95320 replased but no luck ,Need help pleas .
mercis
1st September, 2011, 04:24 AM
clone with bdm
alexG
1st September, 2011, 04:37 AM
Hi.
Which one prosseor have immo ?
mercis
1st September, 2011, 06:06 AM
"I found eprom inside 95320"
this is rigth
clone flash and work
alexG
1st September, 2011, 09:08 PM
Hi.
what do you meen clone flash and work /
I did change 95320 from my ECU to new and nothing heppen .
Can some give me good edvice or just help me.
thanks a lot
keygargoil
1st September, 2011, 10:26 PM
was it key problems or intermitant faults if your changing the ecu you need to read the flash aswell there should be a larger chip ie 29f200, 400 etc swap this aswell