fiat doblo 2001 1.9 jtd immo off

[gomarota]

Hello, i need to do this immo off, its posible done via MPPS or i have to unsolder and read the eeprom soic 8 pin? i have not the car yet, i need to know first if i will be capable to do the work
can be done with xprog 5?, i have bdm too



thanks!!

[lupu_sandu]

Read flash with mpps

[gezame]

Hi
Ecu is with two plug, or five plug?
Regards.

[gomarota]

Thanks really for both post!
I will read flash with mpps, the problem is i have to do all in 2 hours because its 200km far away from here.

The ecu i dont know yet if its two plug or five plug.

So its stored in flash? can you tell me with with sw can i do this work? (if you dont want to tell me i will understand :) )


thanks mates!

[gomarota]

I offer money for this info. I have to do it.
thanks

[lupu_sandu]

So, where is flash?

[gezame]

Hi
Bdm, do not serve for this ecu, flash 29f400 for sure.
If ecu is with five plug, car is euro 2, and immo-off do not posible with dump 29f400, with eprom serial 8 pin (24c04) only posible immo-reset.
I know immo-off is possible only with emulator.
If ecu is with two plug, immo-off is posible in flash 29f400.
Regards.

[gomarota]

tomorrow i will read flash on car,
so immo-reset is not the same that immo-off? whats the difference?

will pray for be five plug ecu :)

thanks

[gezame]

tomorrow i will read flash on car,
so immo-reset is not the same that immo-off? whats the difference?

will pray for be five plug ecu :)

thanks

Hi
I supose you mean:
"will pray for be two plug ecu":)
two plug=immo off in flash.
five plug=immo off, only with emulator.

Immo off:
Other immobilizer system (keys, code box, antenna, etc.) to be in bad condition, car starts anyway.
Immo reset:
Other immobilizer system (keys, code box, antenna, etc.) must be in perfect condition, or car will not start.
Regards.

[gomarota]

here is the ecu id,

Fiat Hawdware Number 46737473
Bosch Hardware Number R04010036
Bosch Hardware Id 0B
Bosch Software Number R2L01
Bosch Sofware Id 0C00
Fiat Identifacation Number 3F.003
Fiat Iso Code C207019837
Fiat Tester Number LUCAS001
Programming Date 31/05/2001

dont know why i couldnt read with my mpps, i have defective i think, the immo is in flash or with emulator?

thanks!

[lupu_sandu]

Remove ECU and open. Look at serial eeprom

[gezame]

Hi
Ecu lucas is for 1.9D, not for 1.9 jtd.
I do not flash eprom.
Normally serial eeprom 25080.
Regards.

[gomarota]

Ok, thanks, i will ask him to get the ecu out and give me, i will post here the 25080 eeprom if he give me the ecu.

Thanks both mates!

[skens]

hi
position eeprom
regards