PDA

View Full Version : Peugeot 206 1.4 HDI Edc16C34



lolooo1981
1st September, 2011, 07:54 PM
Hello,

Anyone have good tune file for Peugeot 1L4 HDI 68 HP ?
ECU is Edc16C34

Hw 9654490280 Sw 9655919780

77808

Read by MPPS

Thanks in advance

leaserhu
1st September, 2011, 08:42 PM
Try this and report!:wink:

alexs307
1st September, 2011, 09:26 PM
How can you say for a tuned file "try and report"?
It is not an EGR OFF file or DPF OFF file...

What if lo_loo1981 comes tomorrow and says: "well, i tried it, engine blew, so I guess it is not ok...maybe you can make another file".

Although I am not happy with the idea of free tuned files for people, at least make something you are sure of and do not test on people's cars.

lolooo1981
1st September, 2011, 11:05 PM
How can you say for a tuned file "try and report"?
It is not an EGR OFF file or DPF OFF file...

What if lo_loo1981 comes tomorrow and says: "well, i tried it, engine blew, so I guess it is not ok...maybe you can make another file".

Although I am not happy with the idea of free tuned files for people, at least make something you are sure of and do not test on people's cars.

Thanks,
I am not in search of free file but only on proper tuner who made good file.
I take good proposition of good tuner :)

Best regards

alexs307
2nd September, 2011, 02:43 PM
I feel good today because I was able to help some people far away that were in trouble.

Here is a tuning file for your car as a gift, I just finished it.

Usually, as far as I've seen, all 1.4HDI have turbo mechanically regulated. Leave the turbo as it is, do not adjust actuator length.

Waiting for feedback.

bts
2nd September, 2011, 03:04 PM
Hello,

Anyone have good tune file for Peugeot 1L4 HDI 68 HP ?
ECU is Edc16C34

Hw 9654490280 Sw 9655919780

77808

Read by MPPS

Thanks in advance


Tuning mod file

:wink:

lolooo1981
2nd September, 2011, 05:42 PM
I feel good today because I was able to help some people far away that were in trouble.

Here is a tuning file for your car as a gift, I just finished it.

Usually, as far as I've seen, all 1.4HDI have turbo mechanically regulated. Leave the turbo as it is, do not adjust actuator length.

Waiting for feedback.

Thanks for help @Alexs307 i will try and report it.

Many thanks for gift

Best regards

bts
2nd September, 2011, 08:07 PM
Hello Bts,
Thanks for job,what do you need for password ?

Bestregards


Sent to passs

lolooo1981
2nd September, 2011, 08:41 PM
Sent to passs

Thanks for file @Bts.
I will test and report.

Many thanks and best regards

lolooo1981
3rd September, 2011, 11:29 AM
Hello,
Need help,after flash of @Alexs307 the car is in trouble.
Injection lamp is on.
When i reflash it in origine same problem lamp is on.
Someone have solution?
Origine is corrupted ?

I lose power after reprog over 3000rpm and with ori file same problem.
Flash with mpps V10
Thanks for help i need it

Best regards

grinovsky
3rd September, 2011, 11:54 AM
check the injectors code by an interface diag
may be they are ereased when you had flashed the ecu

lolooo1981
3rd September, 2011, 12:06 PM
check the injectors code by an interface diag
may be they are ereased when you had flashed the ecu

Is it possible to retrieve injector code with Lexia-3 V46 PP2000 ?

I think this is the problem.
If i drive with this problem for the moment, it is risky ?

Thanks

grinovsky
3rd September, 2011, 12:14 PM
yes,you can write the injectors code by lexia
and i think that you have to repair your ecu first
then drive your car

lolooo1981
3rd September, 2011, 12:18 PM
yes,you can write the injectors code by lexia
and i think that you have to repair your ecu first
then drive your car

What do you mean about "repair" ?

Best regards

grinovsky
3rd September, 2011, 12:28 PM
What do you mean about "repair" ?

Best regards
write in ecu the injectors code for each injector,to make able the ecu to drive the injectors well

alexs307
3rd September, 2011, 02:25 PM
ECU coding is gone due to OBD flashing.
You should have waited 5min at least after flashing procedure.
With PPS or Lexia restore engine ecu coding and injector codes also.
If you would have used BDM, you wouldn't have this specific PSA problem.
Same thing would have happened even if you tried to flash original file back from the first time.

lolooo1981
3rd September, 2011, 06:07 PM
Thanks at all for your help i will try to restore injectors next week.

Best regards

J_amb_o
3rd September, 2011, 10:52 PM
If you wait 5 mins do you not need to recode?

elchip
3rd September, 2011, 11:47 PM
If you wait 5 mins do you not need to recode?

If you flash via OBD yes , it depend of tool you use for flashing...

So the best is to usage BDM100 if you have and you don't have any problem ;-)

The best regard's

lolooo1981
9th September, 2011, 08:17 PM
Problem solved.
Thanks to @Alexs307 and @Grinovsky for support.
Modded file is very good

Many thanks

Best regards

jejevfr
11th September, 2011, 09:28 AM
Hello,

please i have a 207 hdi 1.4 edc16c34
help me for a good tune file for this Peugeot.
ECU is Edc16C34

i read the ecu whit mpps.
I made a mod but must miss a deadline I can not find, because the result is not terrible.

This joint, the original and the mod


thank you very much

thank you, but I managed to find a problem in the file

lolooo1981
4th December, 2011, 11:56 PM
Hello,

After all these problems with this car i decide to retrieve old ecu for check it by @Alexs307.
If anyone have informations about problem encounter like me, give me your sense about this.
After flashing (by mpps)mod file car was loose injector coding, one week later injectors and entirely ECU was recoded.Car work well.After 1 week, car loose power and 3 injectors stay in open position and error with glow plugs.After 2 or 3 of recode by Peugeot planet, ECU loose entire memory...Result is 1200 euros of reparation include new ECU.
Who was encounter this problem and who was found solution?
PSA don't ask me found the error...just say to me that is the file of @Alexs307 but i don't think so...

Any informations would be appreciated.Engine is DV4.

Thanks in advance

Regards

Foblas
6th December, 2011, 08:37 AM
mpps working with these ecus, but only reads the calibration. Sometimes when you write, something goes wrong. Perhaps this is a mistake of the mpps or soft or features of the ecu.
I killed the same way the firmware to the 407sw, has been erased a full flash. But thanks to God I was able to restore ecu and erased firmware.
Now I always do full bdm file from edc16.
It takes a little more time and effort. but guarantees a good result.
You can always restore ecu to its original state, or clone it to another ecu.

elektronur
7th December, 2011, 03:06 PM
thanks... but where is the password????

DuDeTuning
7th December, 2011, 07:02 PM
Hello,

After all these problems with this car i decide to retrieve old ecu for check it by @Alexs307.
If anyone have informations about problem encounter like me, give me your sense about this.
After flashing (by mpps)mod file car was loose injector coding, one week later injectors and entirely ECU was recoded.Car work well.After 1 week, car loose power and 3 injectors stay in open position and error with glow plugs.After 2 or 3 of recode by Peugeot planet, ECU loose entire memory...Result is 1200 euros of reparation include new ECU.
Who was encounter this problem and who was found solution?
PSA don't ask me found the error...just say to me that is the file of @Alexs307 but i don't think so...

Any informations would be appreciated.Engine is DV4.

Thanks in advance

Regards

Hello lo looo1981, do you coded injectors in right order ?
Lot of car i have seen in psa group, specially this car had a lot of problem with injectors.
But this engine is very reliable.
Edc16c34 work properly in all case.That seems to be another problem.
The amt cartech mpps is a good tool but BDM (Official) is better for this job.

Regards

lolooo1981
7th December, 2011, 08:21 PM
Hello lo looo1981, do you coded injectors in right order ?
Lot of car i have seen in psa group, specially this car had a lot of problem with injectors.
But this engine is very reliable.
Edc16c34 work properly in all case.That seems to be another problem.
The amt cartech mpps is a good tool but BDM (Official) is better for this job.

Regards

Yes, of course.
The ECU was recode by automatic in PSA garage.But no way...
As i said before, injectors stay in open position.

Best regards

DuDeTuning
7th December, 2011, 09:51 PM
Yes, of course.
The ECU was recode by automatic in PSA garage.But no way...
As i said before, injectors stay in open position.

Best regards

Problem of injectors i think.
But ecu....i think it run properly.
Open it to check it or send it to electronic reparator.

PM me i can redirect you to good contact.
I think you change it for nothing.

Cordialy

gzk
10th December, 2011, 06:18 AM
i have make lot of edc 16 psa 1.6 and 1.4L hdi
stock and most not stock engine .
with mpps 3 5 10 & 12 never have problem of injector coding .
you juts have to follow the mpps message and thats all .
when you kill an edc 16 ecu you don't need to buy a 1200***8364; one .
you can get one in a crapyard for cheap and switch the eeprom .

another think it's to backup the whole ecu with bdm before all .
if something wrong happend , just get a spare ecu in a crapyard and restore the bdm copy that's all no recoding .

DuDeTuning
10th December, 2011, 03:34 PM
No, the time for waiting is a little bit more, if you don't wait longer you loose coding of injectors.

Just save original flash by BDM for security thats all.
I think this ecu is not dead just need a little inside view.

Regards

Ed


i have make lot of edc 16 psa 1.6 and 1.4L hdi
stock and most not stock engine .
with mpps 3 5 10 & 12 never have problem of injector coding .
you juts have to follow the mpps message and thats all .
when you kill an edc 16 ecu you don't need to buy a 1200***8364; one .
you can get one in a crapyard for cheap and switch the eeprom .

another think it's to backup the whole ecu with bdm before all .
if something wrong happend , just get a spare ecu in a crapyard and restore the bdm copy that's all no recoding .