PDA

View Full Version : EOBD 1250 cant read PSA EDC15C2?



z786
1st September, 2011, 11:29 PM
Hi, im tryin to read a 307 hdi ecu edc15c2 but i get errors sayin something to do with speed

any ideas please

thanks

levisdj
2nd September, 2011, 11:41 AM
Speed related errors are usually from bad driver in Galletto.Hope this helps

z786
2nd September, 2011, 11:53 PM
hardware or software?

Eight
3rd September, 2011, 12:34 AM
Try connecting gnd on ecu. Have some funny exeprience with that ecu. Obd read is not complete without gnd connected. Tested on two ecus at peugeot 307 but in citroen c5 that is not case.

BR

levisdj
3rd September, 2011, 01:29 PM
I'm sorry, I didn't make myself clear : driver related meant when selecting ECU type and car from list in Galletto software.

z786
4th September, 2011, 12:53 AM
i got it done with kess v2 instead, no gnd needed :)

thanks

gzk
6th September, 2011, 02:50 PM
galletto clone 100% work with psa edc15C2 and with all edc15 no worry about the manufacturer i have test .
no trick like ground to do
if you get error and have to make some trick ( i don't speak about vag and fuse 11) :

* bad clone
* reinstall your drivers , sometime if you have vag.com or other interface using ftdi chip , the drivers can make some trouble , be sure to manually chose the driver of the galetto in his directory
* check another usb port
* be sure to use xp with 1250 , vista or 7 is supported on the 1260 clone .
* disable Antivirus soft .