AUDI A4 01J 927 156 HT (TEMIC) NEED DETAILS

[kasim_izmir]

Hi to all
Please can you help me ?
I saw this unit for the first time, I need repair details
Please can you share with me , I check all wire , all is ok
Please see picture of ecu in attach

With best regards
kasim

[haroutioun]

Hi to all
Please can you help me ?
I saw this unit for the first time, I need repair details
Please can you share with me , I check all wire , all is ok
Please see picture of ecu in attach

With best regards
kasim
-------------------------------------------------
Hi,
Dear what is the fault? did you check with scan your transmition? & what you mean i check all wires? did you check in ecu board the wires? Do it with great care! There are very thin wires all around, try to look well if any wire is not connected to ecu board try to resolder it,
Good Luck..

[kasim_izmir]

-------------------------------------------------
Hi,
Dear what is the fault? did you check with scan your transmition? & what you mean i check all wires? did you check in ecu board the wires? Do it with great care! There are very thin wires all around, try to look well if any wire is not connected to ecu board try to resolder it,
Good Luck..
Hi , I can not check ecu via diagnose, Car is not in the my workshop
They brought ecu dismantle to me
I check very thin wire ( please see picture) , not broken
But, I think fix standard error , because , some people saying can be repair with 2 years warranty , i saw in the internet

BTW , thanks for quckly answer
WBR
kasim

[haroutioun]

Hi , I can not check ecu via diagnose, Car is not in the my workshop
They brought ecu dismantle to me
I check very thin wire ( please see picture) , not broken
But, I think fix standard error , because , some people saying can be repair with 2 years warranty , i saw in the internet

BTW , thanks for quckly answer
WBR
kasim
-------------------------------
ok Dear but first must to have detail about this ecu, must connect to scanner to know what is the fault & where? after can begin to ficks....is right?...

[grinovsky]

-------------------------------
ok Dear but first must to have detail about this ecu, must connect to scanner to know what is the fault & where? after can begin to ficks....is right?...
RIGHT M8....

[kasim_izmir]

-------------------------------
ok Dear but first must to have detail about this ecu, must connect to scanner to know what is the fault & where? after can begin to ficks....is right?...
Hi , of course , you are saying right ...
But , I get ecu from customer 15 days before for repair :)
BTW , 9 days Ramadan holiday in the turkey, my workshop closed..
I lost many time .. I tried my luck , maybe can be find any solution :)
OK thanks , to send back ecu for dtc codes

THANKS
kasim