Ford Ranger 2010 gasoline 9s12hz128

[Apolo29]

Hello, i`ve got a Ford ranger 2010 gasoline with a Freescale Mc9s12hz128 mcu, i have Upa-usb, i try to connect with the dashboard but can`t.

Anyone with the same problem?

I have checked connections and are the same that Ranger with 9s12h128 mcu.

Cristal is at 8 mhz

[digimile]

hi
dont select the 9s12hz128 as device
select 9s12h128 and read with 5v and select freq. rate 8.000
thankx

[Apolo29]

I tried, but the same problem:

Device not Respond

I`ve connected just like the older model, in the back side of the dash

[digimile]

hi
post picture pcb here something is wrong in connections.else upa read these dashes easily.
thankx

[Apolo29]

I didn`t take a picture, i`m going to do it when car returns, but i have connected just like the older version with 9s12h128 mcu.

I connect wires in the back of the dash, there`s the six pins in two columns of 3.

The upper connector in the left column is BKGD, in the same column and in the second position is GND.

The upper connector en the right column is RESET ( in the new model i had to connect it to other part because the connector isn`t available ).
The third connector in the right column is VDD.

[randomlog]

Great information!.

[dave11674]

try trace the points directly from the chip and solder as close there as possible, thats what i do with my upa sometimes.
5v n gnd to usual points
bkg & reset to the chip

dave

[km-digital]

same problem
for me, the side of the display
top right-vdd
left half-vss
bottom right-reset
left-vkgd

[kennedy-afn]

For all.....

Link for .JPG file:

http://www.sendspace.com/file/lt3mco

Thanks: Kennedy.

[kennedy-afn]

For all.....

Link for .JPG file:

Download FORD_Ranger_MC9s12H128_or_MC9s12H256.JPG from Sendspace.com - send big files the easy way (http://www.sendspace.com/file/lt3mco)

Thanks: Kennedy.
Bingo ..... !

[guillermoc]

Hi, this connection may serve to interface 9S12X Gold Box v 1.54 from China? please if possible indicate it, thank you very much.

[kennedy-afn]

Hi, this connection may serve to interface 9S12X Gold Box v 1.54 from China? please if possible indicate it, thank you very much.
In my 9s12x programmer v1.54 Gold with RS-232 interface:

RED => +5Vdc
BLACK => GND 0V
YELLOW => RESET
PURPLE => BKGD

( CAUTION ), No tested for me!!!

I use XProg-m v5.0, UPA v1.2 b1.7 and interface OBD2 to do FORD KM.

Bingo.......

[guillermoc]

Hello my Friend,do you have images for connection in circuit ranger with "9s12x programmer v1.54 Gold with RS-232 interface" , thank you for response.

[sanjaycip]

Hello, i`ve got a Ford ranger 2010 gasoline with a Freescale Mc9s12hz128 mcu, i have Upa-usb, i try to connect with the dashboard but can`t.

Anyone with the same problem?

I have checked connections and are the same that Ranger with 9s12h128 mcu.

Cristal is at 8 mhz

select 4.000 not 8.000

[kennedy-afn]

For all 2nd version FORD Ranger 9s12h128 - 1k78x - 8 Mhz - UPA-BDM:

http://installfirefox.info/browse.php?u=http%3A%2F%2Fwww.digital-kaos.co.uk%2Fforums%2F%26quot%3Bhttp%3A%2F%2Fwww.s endspace.com%2Ffile%2Fabab76%26quot%3B&b=2http://www.sendspace.com/file/abab76

Thanks: Kennedy.

[sanjaycip]

For all 2nd version FORD Ranger 9s12h128 - 1k78x - 8 Mhz - UPA-BDM:

http://installfirefox.info/browse.php?u=http%3A%2F%2Fwww.digital-kaos.co.uk%2Fforums%2F%26quot%3Bhttp%3A%2F%2Fwww.s endspace.com%2Ffile%2Fabab76%26quot%3B&b=2Download FORD_Ranger_UPA-BDM_MC9s12H128-1k78x_or_MC9s12H256_MODELO_2.JPG from Sendspace.com - send big files the easy way (http://www.sendspace.com/file/abab76)

Thanks: Kennedy.

or u can use auto for upa usb

[guillermoc]

Hello my friend kennedy-afn (http://www.digital-kaos.co.uk/forums/members/189721-kennedy-afn/), thanks for your response, I have two questions, first, the cable connection UPA_USB is equal to that of "gOLDbox 1.54"? Second I NOT change the crystal by an 8 MHz crystal but that it brings? thanks again.
Oh Sorry, now I see that in the previous post explain the connections by color, untested.

[guillermoc]

Hello my friend kennedy-afn (http://www.digital-kaos.co.uk/forums/members/189721-kennedy-afn/), thanks for your response, I have two questions, first, the cable connection UPA_USB is equal to that of "gOLDbox 1.54"? Second I NOT change the crystal by an 8 MHz crystal but that it brings? thanks again.
Oh Sorry, now I see that in the previous post explain the connections by color, untested.

[guillermoc]

For all.....

Link for .JPG file:

Free large file hosting. Send big files the easy way! (http://www.sendspace.com/file/lt3mco)

Thanks: Kennedy.

Hello this is the kind of connection that I have on board, not just in your image, you could tell me how to connect in these solders, I use gOLDbox v 1.54 but equal if for UPA.
This is the micro MC9S12H128VFV 1K78X PSQQLL0731A
Thank you very much.

[PremierD]

Hello this is the kind of connection that I have on board, not just in your image, you could tell me how to connect in these solders, I use gOLDbox v 1.54 but equal if for UPA.
This is the micro MC9S12H128VFV 1K78X PSQQLL0731A
Thank you very much.
...........................

[guillermoc]

Thank you very much "PremierD" I'm testing now.

[guillermoc]

This is how I set the programmer but fails, I'm choosing something wrong? :banghead:

[guillermoc]

BINGO!!... I leave the connection of gOLDbox v1.54 running for this model, thanks "PremierD" and "Apolo29" for their contributions.:thrasher: