View Full Version : EDC16C3 no communication
kiriki6969
6th September, 2011, 07:17 PM
I have a citroen xsara edc16c3 with number of 0281011233
No communication with lexia3.
We sent 95160 dump.
Having someone can give me a clue.
Thanks to all.
kiriki6969
7th September, 2011, 11:45 AM
Full dump for this ecu?
comert50
7th September, 2011, 11:56 AM
Can you read good, but not the mpc mpc eprom can be collapsed with BDM-style reader
kiriki6969
7th September, 2011, 12:25 PM
I can read with xprog-m?
borysgo2
29th October, 2011, 10:31 PM
Check power supply, eartchs and can line (when connected you schould have approx 60 Ohm between can wires) - if everything is ok prapobly you have problem with bosh driver inside edc16 ecu (as far i remember number ends 423).
I think you can read with xprog mpc im not sure about flash (eternal as far i remember for this ecu).
I have full dump.
borysgo2
29th October, 2011, 10:37 PM
There you go.
mustafa deveci
29th October, 2011, 10:46 PM
Can you read good, but not the mpc 555 eprom can be with BDM-100 style reader
borysgo2
11th November, 2011, 12:09 AM
Dump is good readed with bdm100. Just put *.bin extention at the end of the files.
MACKIE
11th November, 2011, 12:48 AM
I have a citroen xsara edc16c3 with number of 0281011233
No communication with lexia3.
We sent 95160 dump.
Having someone can give me a clue.
Thanks to all.
Did you check power supply of ecu ?
Regards
Mackie
teuton
11th November, 2011, 04:52 PM
as said before, check power supply, grounds and continuity of com lines (CAN). If all these are good you got a controller problem!!
MACKIE
11th November, 2011, 05:20 PM
Thats what we talking about ;)
Regards
Mackie
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.