DPF off file needed fore VW Passat EDC16

[Mario32]

Hi,

I need help with DPF off file fore this car.
Filter is already removed and after I made DPF of file with ecusafe 2.0 the lamp is lighting on the board, and the car goes one limp mode.
In attachment is MPPS read.

Thanks in Advance

Vehicle: Passat 2.0 TDI
Bosch Hardware Number: 0281012119
Vw Software Number: 03G997021J
System Type Number: R4 2,0L EDC G000SG

[alexs307]

no chance with ecusafe or swiftec. must be removed manually. i give you a hint, it is a single value.

[bazare]

I give you another hint ... alexs307 knows how to do it. contact him by PM and ask him to do it for the correct price offcourse.

[Mario32]

Hi Friends,

I still need help with this one.

Thanks in Advance.

[grinovsky]

read with bdm100 flash and eprom and upload your dumps

[bazare]

no need to read anything ... dpf off in this car is single value switch - which is already present in the dump he posted.
I thought you are the specialist but apparently not ...

[alexs307]

copyright Macxlulu: "Ecusafe era is ending..."

[grinovsky]

copyright Macxlulu: "Ecusafe era is ending..."
a new medecine is coming;hehehe
listen Mario32
flash the original,then make this 2 addaptations with interface diagnostic:
1) reset DPF after replace
2)adaptation differentiel sensor
after that,the lampe on the bord will come off,if not ,don't continus DPF OFF you will not succes
if yes,read flash with mpps and upload here,i will make you DPF OFF with ecusafe

[bazare]

mr G please use the other "secret" and "most powerfull" software which is your favorite and remove the DPF ... Ooopps it doesn't work and you have no ideea where the switch is. Frustrating isn't it?

p.s. mario just pay someone who can do it in the right way and stop fooling around before you mess something else in ECU adaptation. It might cost more after you brick the ECU.

[Mario32]

no chance with ecusafe or swiftec. must be removed manually. i give you a hint, it is a single value.


Can you be more specific about this changing only one single value manually.

[alexs307]

Mario, what is the purpose? You want me to tell you what and where the value is? Single DPF free files on this forum are those made by Ecusafe...show me a marelli working solution, show me a PPD working solution, show me a VAG edc17 working solution shared on this forum...

What did you not get from my message? Ecusafe does not work. Swiftec also. One bit, DPF OFF. Not for free. Tested solution.

In your case i would be happy that there is someone able and willing to do your DPF OFF as an open file, meaning me. I met situations where I wanted to pay for a DPF OFF file and no one was willing to sell me the solution as an open file.

The fact that is not for free...well, that's it...I earn my daily money from this stuff. Or you can as well try the other shitty options of the famous Ecushitsafe software...

[macxlulu]

7F ............. :) and all is clear:)

:party:

[bazare]

well said mate ... let him try ecusafe, swiftec etc. He will probably pay for a real solution in the end:)

[macxlulu]

and what will be on EDC16 cp34: D smoke from the exhaust and the arrival of oil .... and vw crafter .... ?? :D

[cseko]

Hi
Please someone help me!
I need DPF off file this ecu:
Passat 20tdi
0281 011 145 EDC16u31
Thanks in Advance
cseko

[LaraVAG]

Swiftec correct romove dpf in Passat!

[LaraVAG]

test many times! If you dont have original softwer like swiftec, how can you now that it isnt work??!! Swiftec in many case disable dpf by switch in that car too!

[cseko]

Swiftec correct romove dpf in Passat!

Can you help me?
I haven't swiftec soft.
This is the full dump with bdm.
thanks cseko

[skywoker]

Your file dpf off. Pass in PM

[barteczekk]

try it and report.246899

[angelx431]

Where you live? March,2012 ?

[cristecristian]

I can help me someone canceled particulate filter in 2004 passat? MPPs is read
281254

[tarts1999]

I can help me someone canceled particulate filter in 2004 passat? MPPs is read
281254

Dpf off, pass in pm.
If error Code software incompatible then disconnect all dpf sensor (diff. press ,temp ).

[cristecristian]

Thank you, tarts1999 , worked perfectly

[alex77vl]

Hello friends ,

I have a 2005 vw passat 3b 2.0 TDI-PD 136 hp.I want to make dpf off and hot start fix and i have read the edc 16 with mpps . I have read in two ways ,mean data area and full read.