Passat 2005 b3 pin locations

[z786]

Hi i have a passat here, i need to know locations where the pin is and whats the easiest to remove/read

thanks

[bram380]

TMPro2 reference:

Software module 22 - VW, Skoda, Seat IMMO1 immobox Siemens
Memory device is Motorola MCU MC68HC05B16 PLCC52 package.
Expected file size is 256 bytes.Use T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
VW: Caddy(-1998), Golf 3, Passat 3, Polo 3(-1998), Sharan(-1998), Transporter(-1998), Vento
Seat: Arosa(-1998), Alhambra(-1998), Cordoba(-1998), Ibiza(-1998), Inca(-1998), Toledo
Skoda: Felicia, Pick-up
Ford: Galaxy


Software module 149 - VW Passat 3C comfort and ECU with ID48
Depending on job with car you have 2 options:
1.If job is NEED SPARE KEY,you need ONLY file from comfort unit.
2.If job is LOST ALL KEYS,you need files from comfort and engine ECU.
For engine ECU supported are EDC16 with eeprom 95c320,MED9 with 95c080 and Siemens SIMOS PPD with 95c320.For comfort unit eeprom is 95c320.
Use Megamos Crypto or Silca T6 - JMA TP08 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
VW:Passat 3C (B6/CC)

[z786]

can any1 tell me where comfort unit is?
is file crypted in it?

[ray-ray]

Sbb bypass the pin on 05 to 05.5 only that the fastest way.

[z786]

i need a pin to readapt steering lock

any other locations be will be at?

[H.Wessel]

hi

steeting lock pin is located on ELMOS or Motorola unit, microprocessor 68HC908,
if you upload the dump I can find Pin for you, no problem

best regards
H.W

[sherl645]

Comfort module is behind the glovebox.
Ronan

[z786]

i have comfort module here in front of me

what eeprom holds pin data?

i cant see any standard eeps here

is the right eeprom on other side of PCB?

how do i take out PCB without damage?

thanks

EDIT: iv got the CECM here not the comfort module :( lol