PDA

View Full Version : EGR switch - EDC15C2 2.0 HDI



Azzx
17th September, 2011, 04:28 PM
Hey

Anyone of you have a clue how to disable EGR
without any DTC on EDC15C2 (Citroen C5, 2.0 HDI, 107 PS)?

I was messing around with the FLOW MAPs
- requested 600mg of air and it looks like
the Antipollution doesn't appear (egr disconnected from vacum).
But after while with no light on I got the DTC P0400
about wrong flow cause there is nothing to control
the air flow since I disconnected the air doser too.

I know there is EGR switch off somwhere.

Anyone?

ORG dump with FAP off.

grinovsky
17th September, 2011, 06:20 PM
right, there is EGR switch off
mp me for proffessionnel job

dgmcan
18th September, 2011, 12:14 PM
Please,
upload original file for do EGR OFF.

Azzx
18th September, 2011, 12:57 PM
This is still unsolved.

dgmcan
18th September, 2011, 12:59 PM
This is still unsolved.

Please
upload original file.

Azzx
18th September, 2011, 02:35 PM
Here is orginal file with FAP on.

I tried to set up the values on EGR map to 8080 etc.
this doesn't work on this ECU.

dgmcan
18th September, 2011, 06:58 PM
Try this file.

grinovsky
18th September, 2011, 10:07 PM
sens me pw by pm and i will tel you if the egr is desactived or not

Azzx
19th September, 2011, 08:58 AM
There is still DTC after few seconds on idle P0400, after while Check engine + Service.
Doesn't work.

Any other ideas, thanks

Azzx
28th September, 2011, 11:06 AM
I found it on my own, thanks.
Duty cycle 0% :).

pititec
22nd November, 2011, 10:38 PM
really you've found this solution?? it works fine?

Azzx
23rd November, 2011, 06:26 PM
Works fine, 0% on EGR, you must after disconnect the plug from electrovalve - NO DTCs.

Screen attached (polish Lexia).

z786
24th November, 2011, 01:58 AM
care to post solution

Foblas
24th November, 2011, 11:44 PM
Azzx can you upload modified file please?

Zorro1984
31st May, 2012, 04:22 AM
EGR Citroen c5 2006

lupak
17th July, 2012, 11:22 PM
I have 307 with fap off, can yuo share egr off?

assitutto
18th July, 2012, 08:26 PM
see my screenshot.
info FREE for all

ammarben
18th July, 2012, 10:27 PM
EGR switch EDC15C2 (http://www.ecuedit.com/#p135)



1. Look the hex dumhttp://www.ecuedit.com/styles/we_clearblue/imageset/icon_post_target.gif (http://www.ecuedit.com/egr-switch-edc15c2-t31#p135)p in 8bit Text mode.
2. Set the number of columns to 10.
3. Look for: 001 001 000 000 001 000 001 000 001 048 string.
4. The first 001 is EGR Switch with/without (1/0).
5. The second 001 is Boost Control Switch with/without (1/0).

assitutto
19th July, 2012, 07:25 AM
same as mine :D
only diference is that i look my hex dump in decimal and i see 1 1 0 0 1 0 1 0 1 48

lupak
19th July, 2012, 09:53 PM
thanks to all !!!
In the next day I try it

lupak
19th July, 2012, 11:27 PM
Is right like in the picture?

assitutto
20th July, 2012, 07:50 AM
yes, it's ok

pawliukazz
9th August, 2012, 05:08 PM
same as mine :D
only diference is that i look my hex dump in decimal and i see 1 1 0 0 1 0 1 0 1 48
The string: 001 001 000 000 001 000 001 000 001 048 is in decimal to begin with, so no differences from yours.