PDA

View Full Version : renault edc16c3 problem



techman1
19th September, 2011, 09:40 PM
Hi guys, have a renault megane 2003 edc16c3 which following a bad read with mpps v10 has left the ecu with no injector coding. All injectors show a coding of A. I have tried to manually program the injector codes with clip but it fails stating internal electrical failure.
The car starts and runs but only to 1500rpm, MPPS read the id ok but failed almost straight away when attempting a normal read instructing me to contact amt, my mpps is a clone. Can anyone suggest a fix please?

Many thanks in advance.

Stanton
19th September, 2011, 09:56 PM
BDM ori data and start again.

MPPS doesnt recode config data such as inj coding on Renault or PSA, so best to use tool that does or BDM.

eduardo74
20th September, 2011, 08:46 PM
You must code injectors with proper diagnostic tools like renault can clip without any problem, I did it few times!

ominimicu
20th September, 2011, 10:24 PM
you can find the codes written on each injector, make sure you count injector 1 from the belt

Stanton
20th September, 2011, 10:27 PM
Cyl 1 is flywheel end :)

furnata
26th September, 2011, 06:47 PM
And the injectors code is writen in e2prom -8pin soic:)

i_shot_the_sheriff
14th May, 2012, 07:08 AM
ARe the injectors in the 95160 8pin? If yes is there a way to add them manually (with hex editor?)

mbtuning
14th May, 2012, 10:24 AM
just use renault can clip ... in most of cases works great.

i_shot_the_sheriff
14th May, 2012, 10:40 AM
It is weird that can clip won't program the injectors for this ecu!!!! I've tried another ecu with different numbers and it worked,,, but not with this one!
That why i'm searching for a way to add them manually via the eprom

ecutuners
14th May, 2012, 10:51 AM
The codes are inside eeprom in hex format,read eeprom of the spare ecu and then program some injectors to it, read eeprom again you will see where they are stored

i_shot_the_sheriff
14th May, 2012, 10:55 AM
THe problem is that the Injector codes are not in plain text (in the hex format)....but are encrypted!!!

koolstuff
27th March, 2017, 12:48 PM
i have similar problem with renault master2 and my clip can is bricked

Aivis3
27th March, 2017, 03:01 PM
Easy with Galletto4. Need to read injector file, save, repair it and upload to ecu.