PDA

View Full Version : 06 VW Passat ECM replacement



ernesto125
20th September, 2011, 05:40 AM
I have a 2006 VW Passat with bad ECM and I would like to swap it with the used one so my question is if this is possible. If yes, I'd like to know what needs to be done to make it work.
ECM p/n: 03H 906 032 C
As always, any help will be greatly appreciated.

haroutioun
20th September, 2011, 07:49 AM
I have a 2006 VW Passat with bad ECM and I would like to swap it with the used one so my question is if this is possible. If yes, I'd like to know what needs to be done to make it work.
ECM p/n: 03H 906 032 C
As always, any help will be greatly appreciated.
-----------------------------------
Hello,
about your ecu vw passat 3.6 fsi type formula MED9.1, yes is possible swap. copy eeprpm + flash. after can you start the car.
or if want try immo off.

lateef
20th September, 2011, 04:12 PM
is immo off possible? IF yes how do we do it?

ernesto125
21st September, 2011, 04:55 AM
haroutioun, thank you for your replay, but can you be more specific with which eeprom has to be copied and flashed.
I can post the picture if this will help in any way.

cqae
21st September, 2011, 05:32 AM
post a pic of the internals of the ecu, try to get a close up of any 8 leg eeproms, These are where the immo info is most likely held

haroutioun
21st September, 2011, 10:44 AM
haroutioun, thank you for your replay, but can you be more specific with which eeprom has to be copied and flashed.
I can post the picture if this will help in any way.
------------------------------------------------------
Hi,
about eeprom 8 legs (95160) & about flash you need (BDM) programmer to read & write the flash.

cqae
4th October, 2011, 02:39 AM
yes, post the pic............and thank those that have tried to help you

ernesto125
4th October, 2011, 03:56 AM
Thank you guys for the help, but I was unable to finish the job. The owner pulled the car from the shop to send it to the dealer.