chriskross
21st September, 2011, 06:44 PM
Hi!
Is it possible to power on RCD 300 on bench to test it?
i put in 12V on pin 15 and ground to pin 12
when i press power button radio only is blinking for 1 second.
do i need can bus module to run? which was can do this?
thx chris
Is it possible to power on RCD 300 on bench to test it?
i put in 12V on pin 15 and ground to pin 12
when i press power button radio only is blinking for 1 second.
do i need can bus module to run? which was can do this?
thx chris