BSI Peugeot 407 epron 95256

[Rito]

I do this car Peugeot 407 but after I mount BSI nothing appears in dash and car not start.

I put original dump in car and nothing, Car not star and dash nothing appears..

I do it in option 95XXX in enigmatool.

So i need virgem dump or what can I do??

Here is dump I had save:
I write wrong in name file this is 95256

Thanks

[andersonmaxi]

write original dump of bsi car start and post original dump

[drpeter]

I do this car Peugeot 407 but after I mount BSI nothing appears in dash and car not start.

I put original dump in car and nothing, Car not star and dash nothing appears..

I do it in option 95XXX in enigmatool.

So i need virgem dump or what can I do??

Here is dump I had save:
I write wrong in name file this is 95256

Thanks

Your original dump is ****ed, you only read the half of the dump.

dump should go to 7FFF not 3FFF you have read BSI as 95128.

[Rito]

Your original dump is ****ed, you only read the half of the dump.

dump should go to 7FFF not 3FFF you have read BSI as 95128.


I see this now....my mistake..
That is possible virginise one dump??and after program lexia??

[newgeniehex]

I see this now....my mistake..
That is possible virginise one dump??and after program lexia??
HELLO
put all FFFF in your dump and try to reprogramme whit PPS
regard
if it is ok post your answer!!

[tachonow]

HELLO
put all FFFF in your dump and try to reprogramme whit PPS
regard
if it is ok post your answer!!
Yes mate youre right but not all bsi work withh FF in all dump for coding.
BTW Enigma users be aware that dump from 128 and 256 arent well saved. First make backup with another tool and then correct with Enigma.
My 2 cents.

[Meat-Head]

Your original dump is ****ed, you only read the half of the dump.

dump should go to 7FFF not 3FFF you have read BSI as 95128.


Perhaps it would be a good idea for all you IN-correctors out there to download a bucket of eeproms, and copy the IN-corrected dump
onto that - if it don't work you have something to fall back onto.

Also a tip suggested by Obdmaster is to mark with black marker part of the board which is the same side as pin 1 of your chip.

prefer to use knife blade

Meat

[tachonow]

Perhaps it would be a good idea for all you IN-correctors out there to download a bucket of eeproms, and copy the IN-corrected dump
onto that - if it don't work you have something to fall back onto.

Also a tip suggested by Obdmaster is to mark with black marker part of the board which is the same side as pin 1 of your chip.

prefer to use knife blade

Meat
Mate you are kidding again. For profis that not necessary. Its obvious pin 7 and 8 are bridged and pin 4 its gnd easy to check so what for it worth to make signs with marker ? LOOOOL !
Anyway newbies are always learn.......

[Meat-Head]

Mate you are kidding again. For profis that not necessary. Its obvious pin 7 and 8 are bridged and pin 4 its gnd easy to check so what for it worth to make signs with marker ? LOOOOL !
Anyway newbies are always learn.......

Yeah, that's fine, but you might be IN-correcting the number of slices of bread a toaster had done.

Or the french tw*at decides to make the links in different place

[tachonow]

Yeah, that's fine, but you might be IN-correcting the number of slices of bread a toaster had done.

Or the french tw*at decides to make the links in different place
Np mate . Also this job is solvable. Just talk with the right guys in charge.

[Rito]

So, What do??
Try programe BSI whit all FF or someone can give-me vigem dump??

[tachonow]

So, What do??
Try programe BSI whit all FF or someone can give-me vigem dump??
Do as you learned. All okk mate.

[looly]

So, What do??
Try programe BSI whit all FF or someone can give-me vigem dump??

I would program with all FF FF and then recode with pp2000. What have you got to lose??

[Rito]

I would program with all FF FF and then recode with pp2000. What have you got to lose??

Read post nr1.
Car not start and not show any in dash..
Mayby I put my dump (50% dump) and rest in FF???

[Rito]

Anyone can help???

Monday I will bay new BSI....:beheaded::beheaded::beheaded::beheaded:

[Meat-Head]

why buy new bsi, see if you can leech off here a virgin file, or look in the download section.

do a search by member melcool he had a bucket full of dumps, no idea if they will help.

[Rito]

Problem resolved.
I put my dump saved (95128) inside Epron 9526 and rest all FF.
Programme Lexia successful.

Thanks to all...