View Full Version : Focus 2011 9S43 14B321 good clear?
okidedrak
25th September, 2011, 07:08 AM
Can someone more experienced let me know if i cleared this file correctly? Thanks
AMLGAR
25th September, 2011, 05:44 PM
you clear too much...:toilet:
okidedrak
30th September, 2011, 01:22 AM
maybe but I used AMLGAR's cleared bin and that one i actually get the crash detected message again. In my clear, the crash data was gone but i get the OCS code B2290.
okidedrak
4th October, 2011, 09:30 PM
Anyone else?
AMLGAR
4th October, 2011, 11:02 PM
maybe but I used AMLGAR's cleared bin and that one i actually get the crash detected message again. In my clear, the crash data was gone but i get the OCS code B2290.
,:eviltongue::top:, i clear your file like mine form a no deplyed module, maybe i missed something, and im comparing your crash file and isnot complete comparing all here in the forum, ummmmm, good luck
u need a good scan to acces OCS,american scans (SOLUS)(VCM IDS,)(ETHOS), (AUTOENGINUIty) try to clear the codes direct to OCS
okidedrak
5th October, 2011, 03:42 AM
maybe you missed something or i missed something or the OCS code really wont go away without a scantool....
anyone have any experience with this?
okidedrak
5th October, 2011, 10:15 PM
Ok, i managed to read the dump of the module
airbagunit
6th October, 2011, 05:01 AM
hear is a bad 1
8S43-14B422-AF BAD
8S43-14B422-AF BAD.bin (http://www.mediafire.com/?b2r8n2l4hixa7i2)
hear is a good tested file
8S43-14B422-AF OK.bin (http://www.mediafire.com/?xxbeq1ye3l7xziv)
don't forget to thank
clear crash and when you have ocs code open ocs and clear the ocs eprom 95080 TESTED works
okidedrak
6th October, 2011, 05:36 AM
my OCS eprom is actually an atmel 25160, how do i clear that??
airbagunit
6th October, 2011, 07:26 AM
line 200 to 350 clear put fffffff is foe the ocs module not airbag module
let me know
okidedrak
6th October, 2011, 05:57 PM
line 200 to 350 clear put fffffff
let me know
Not sure why you chose those lines to clear, obviously you did not do that in your files. i gave it a try tho and didnt work, then i looked at your files did exactly what you did and magically the OCS code is gone ;-) Thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.