audi A4

[faiscamix]

0 281 001 366/367

2 eproms can any of you guy's clear this for me please. I was searching on my softwares but i could not find nothing. Thank you guy's

p.s 93c46

[vuno01]

try this one and report bro
if your ecu is a bosc msa 11edc1.3.1

[faiscamix]

I'm going to compare and try

Thank you

[faiscamix]

Hi again

This car was tunned so now i'm puting original map files on eproms. I changed the 2 93cXX images and after it started to acelerate alone and do not have throtle response. After some analisis i discovered the problem about imo probably was the 2 93c46 burned. I can't program them right. I got 2 new ones and programed with the images both with imo and with imo off. Still no response from throtle. The acward on this is that the engine always run and acelerate alone. With the original eeproms i had alot of strange ecu dtc's , now with the new eeproms only apear imo dtc , one only ,but the engine starts. I'm getting crazy with this absent of throtle response. The throtle pedal is nice i can read nice values over the ecu to diagnostic tool. Any of you guy's got some experience with the same "happenings". Thank you again for your time

[baltazar3]

Check wiring,resistance on throtle pins and voltage on ECU pins.If all OK you have bad driver in ECU and must repair or change ECU.

[faiscamix]

I will make rework of ecu and test drivers.