VW POLO IMMO INFO

[cqae]

Hi guys & gurus, I have a 2005 vw polo with a BBZ engine.
I have a faulty ecu & want to know where the immo info is held so I can replace it.

I was hoping for either how to get the SKC or to know if it is possible to swap eeproms over?

It has a magneti marelli ecu in it part no. 036 906 034 AK

I have had a quick look inside this but cant see anything that look familiar

or can I immo off this one?
or with vcds & vag tacho can i re-code another ecu to this car?

[lupu_sandu]

No immo off solution.
Swap eeprom 95080 between ecu's.

[cqae]

ok lupu, that should be no problem, but i cant see one with that number on it, although there is only 1 8 leg eeprom on the board. Can you confirm that one in the shot is it? I think it has 2904 on it, but can confirm that tomorrow
or is it under that metal box? I havent taken that off yet, i am not sure which one to swap, do you want me to take that cover off and post another pic?

[haroutioun]

Hello,
1) if you don't found the eeprom (95080), (maybe)>> some one remove it from ecu board >>(maybe).
2) because in first photo look carefully between the (2) big I-C you have empty place for eeprom with 8 legs, try to see.....
Good Luck....

[cqae]

nah, no one has removed it cos it starts and runs fine.

Ive just taken the cover off from isdie & there is an eeprom in it with the number 95080. So thanks Lupu, I will just swap it from a second hand ecu , but just so I know, if I posted a dump would someone be able to get the pin from this?

And just in case, can you confirm this is the right eeprom?

[faze]

nah, no one has removed it cos it starts and runs fine.

Ive just taken the cover off from isdie & there is an eeprom in it with the number 95080. So thanks Lupu, I will just swap it from a second hand ecu , but just so I know, if I posted a dump would someone be able to get the pin from this?

And just in case, can you confirm this is the right eeprom?


About PIN see here ,and yes is the right eeprom http://www.digital-kaos.co.uk/forums/f178/bora-1-6-immo-problem-198239/index3.html

[cqae]

thanks so much FAZE, I really appreciate it. Ive got a second hand ecu on its way-will be a few weeks.

Im gonna swap eeproms just to get it going, but will read them & try to work out the pins too, for my own benfit!

[cqae]

ok guys I have attached the dumps from both the original ecu & the eeprom from the donor ecu in case anyone finds it helpful. I just swapped them over & away it went. I just wanted to sort out the SKCs so I can do it in the future, thanks to all that replied!

[wembleyhill]

No immo off solution.
Swap eeprom 95080 between ecu's.

Hi all i have same problem swaped eeprom 95080 but no good
car will not start both ecu's have same part No
036 906 034 DE can someone Help please ?

Address 01: Engine Labels: 036-906-034-APE.lbl
Control Module Part Number: 036 906 034 DE
Component and/or Version: MARELLI 4MV 5084
Software Coding: 00073
Work Shop Code: WSC 00022
VCID: 58BB8EDD9283
2 Faults Found:
18048 - Internal Control Module: EEPROM Error
P1640 - 35-00 - -
17978 - Engine Start Blocked by Immobilizer
P1570 - 35-00 - -
Readiness: 1110 0101

Address 17: Instruments Labels: 6Q0-920-xxx-17.lbl
Control Module Part Number: 6Q0 920 900 A
Component and/or Version: KOMBI+WEGFAHRSP VDO V14
Software Coding: 01443
Work Shop Code: WSC 00050
Additional Info: VCID: 2C53020DF69B
2 Faults Found:
01177 - Engine Control Unit
65-10 - Unauthorized - Intermittent
01314 - Engine Control Module
49-10 - No Communications - Intermittent
can someone Help please ?