W203 all keys disabled, Help needed

[bluesky2010]

Hi guys,
I have 2001 C200, W203. EIS # 203 545 01 08. inside MCU is 4j74y. When read EIS by Star all keys disabled. Could someone fix my dump ? Or should I swap from other cars dump 4j74y (only this mcu) ? I used to read MCU by AK500. Also this dump can generate new keys as well.
Any help will be appreciated.

[bluesky2010]

Hello, I repaired key dump and now on EIS all keys enabled. But now facing with new problem on ESL all key tracks are disabled. when go to EIS and actual values of (ESL ) read key values : it shows all key tracks ESL = disabled.
Help please! What should I do?
EIS # 203 545 0108 has two MCU-s , I read only one 4J74Y (key data). So is it possible to change by other cars dump (only 4j74y) and matching ESL data ?

[dilick]

Hello, I repaired key dump and now on EIS all keys enabled. But now facing with new problem on ESL all key tracks are disabled. when go to EIS and actual values of (ESL ) read key values : it shows all key tracks ESL = disabled.
Help please! What should I do?
EIS # 203 545 0108 has two MCU-s , I read only one 4J74Y (key data). So is it possible to change by other cars dump (only 4j74y) and matching ESL data ?

hi
check your pm box mate

[HONDA C]

Hi guys,
I have 2001 C200, W203. EIS # 203 545 01 08. inside MCU is 4j74y. When read EIS by Star all keys disabled. Could someone fix my dump ? Or should I swap from other cars dump 4j74y (only this mcu) ? I used to read MCU by AK500. Also this dump can generate new keys as well.
Any help will be appreciated.

with this dump all position keys are disabled .if you have fix the position key to enabled state post the new dump and i will sent you new key dump to make a working key
regards

[bluesky2010]

Hi, this is dump which is enabled all keys. But if go to EIS - ESL key tracks still all keys disabled. I attached 2 pictures which is read by Star.

[HONDA C]

Hi, this is dump which is enabled all keys. But if go to EIS - ESL key tracks still all keys disabled. I attached 2 pictures which is read by Star.


must to activate the esl module (means to synchronized) with eis .after read from keys the position number of any key .make dump (if you have ak 500 you have this opportunity) and put the right dump in the right key .for example if your one key is No 2 (EIS read this key as No 2 ) must to put only the dump key No 2 as well .
regards

[adikk]

Hi, this is dump which is enabled all keys. But if go to EIS - ESL key tracks still all keys disabled. I attached 2 pictures which is read by Star.
Your ESL dont personalisation and dont activation (see DSC01348.JPG). Start activation from Star and see status of key after activation

[bluesky2010]

Toady I go to the car and will try to activate ESL with Star. And let you know results.
Thanks

[vanos batam]

virgin esl think will work

[bluesky2010]

Hello Vanos, How to virgin ESL? Is it AK500 capable to do virginize?

[vanos batam]

yes sure..ak500 can do that

write this file to your esl

[bluesky2010]

Hello Vanos, virgin ESL dont work, I think EIS data is corrupted, Have you seen photo of EIS actual values, there's all ESL key disabled. it's not in ESL, it's inside EIS i think, I'm tryieng put another data into EIS and ESL. Looking for wiring diagramm EIS and ESL for test key on the table .

[MJPOWER]

Hello Vanos, virgin ESL dont work, I think EIS data is corrupted, Have you seen photo of EIS actual values, there's all ESL key disabled. it's not in ESL, it's inside EIS i think, I'm tryieng put another data into EIS and ESL. Looking for wiring diagramm EIS and ESL for test key on the table .


Can you post your ESL dump i will try to enable all keys

Regards
MJPOWER

[puu]

@mj power.
No need enable keys from esl.
If esl virgin alls key are enable

[puu]

@mj power.
No need enable keys from esl.
If esl virgin alls key are enable.
@ bluesky. Cheks again your ezs micro swict,coil or some part may be damage.
Finaly cheks the flash dump..

[JOHNCICY]

Hi mates i read ths dump 4J74Y,bt it shows its all keys are nt used.when i try to calculate key number 4 is fffffffff.cant calculate.can anybody correct the dump please.

[bluesky2010]

Hello mjpower and puu, i will psot esl dump and will check all others, will post results,
Thanks

[MJPOWER]

Hi mates i read ths dump 4J74Y,bt it shows its all keys are nt used.when i try to calculate key number 4 is fffffffff.cant calculate.can anybody correct the dump please.


Hi,m8

Try it

[Label55]

Hi mates i read ths dump 4J74Y,bt it shows its all keys are nt used.when i try to calculate key number 4 is fffffffff.cant calculate.can anybody correct the dump please.

Try this dump. I've added four hash key.

[bluesky2010]

here's original esl dump

[vanos batam]

here's original esl dump


all keys enable

[bluesky2010]

Hello Vanos , I wrote other cars data into EIS and ESL . and made new key , tested on table, it's working (i mean can turn eis and unlock esl), My car is w203 C200 K, data is from W203 C180K, EIS number is same 203 545 0108. So should I use this dump ? by making ECU virginizing. Thanks

[vanos batam]

yes..
read ecu

[bluesky2010]

Hello guys , If I use my original data EIS(which is corrected by label55 and mjpower) and ESl (virgin by Vanos), Can anyone give me key dump? cause original key is also broken, I can make keys by AK500, but it needs to modify ECU. Whitout modifing ecu.

[vitoria]

hello friends I have a W203 kit files over not knowing to put here in the forum could help me on this W203 has to generate new keys with here and there will work EZL

[vitoria]

Thank you all could put

[MJPOWER]

Hello guys , If I use my original data EIS(which is corrected by label55 and mjpower) and ESl (virgin by Vanos), Can anyone give me key dump? cause original key is also broken, I can make keys by AK500, but it needs to modify ECU. Whitout modifing ecu.

Hi,

Here is your ESL and EZS dumps all enabled

Pass in PM

[bluesky2010]

Hi here is screen shots

[MJPOWER]

Hi here is screen shots

Hi,

OK try last Edited dump.

regards
MJPOWER

[bluesky2010]

Ok, will try it tomorrow and let you know result.
Regards,
Bluesky,

[bluesky2010]

Hello ,
MJpower, I used your last edited dump and no good result. Key was turned twice and nothing more. Just died. I have not diagnosed . So Also I found W203 C240's ECU and EIS with key and ESL. Should I put into this car ? What i need to change inside ECU ? (My working car is C200 Kompressor). also mine is left hand drive and c240 is rigth hand.
Regards,