iaw16F EB

[jordiksvk]

hello
i have IAW 16F.EB
PUnto 1.1 SPI

i tryed coded key, and immo off
but car still not started,

i measured that the mag.marelli ecu not have Gng impulses on the pin1 and pin19 from ecu - its for the Ignition Coils...

have somebody dump for 27c512 original and hc11f1 ??? (Pair)
i will try with this, if not helped must order new ecu.

thanx

[fodortms]

Hi!
Immo in HC11F1!
Search in DK or
upload the file 'n i will do it!
You need remove immo box from the car!
Br.

[eleeinidis]

immo off HC11F1
00000000 - FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
000001f0 - FF FF FF FF FF FF FF FFFFFFFFFFFFFFFFF

[mcdc]

Hi,
I'm having a problem with HC11F1.

I've tryed the last post and no luck. Also tried with immokiller, still no luck.

What could be the problem?

Thanks in advance

[Kanaan]

you must have a programer that can read hc11f1
then you can reset the ecu or make immo off

[AlfaRed]

File decode for 68HC11F1!
:wink:

[mcdc]

Thanks for your fast answers!


you must have a programer that can read hc11f1
then you can reset the ecu or make immo off

I have Xprog-M and i have old Xprog from TelWis

With Xprog-M i allways get an error.

I read and write with old xprog on windows 98



File decode for 68HC11F1!
:wink:

Sorry for my neebie question, but this bin is for replacing my original dump? can i write it to the MCU?

Best Regards,
MCDC

[mcdc]

here is my Original file
113852

[huba301]

try this file and report

[unu]

try this file and report
if still doesn't work replace ecu , maybe it's defective ...
I have it this issue 2 weeks ago ..