View Full Version : audi a4 bosch ecu
keygargoil
2nd October, 2011, 02:55 PM
i have a bosch audi a4 ecu 0 261 203 938/939 i need to immooff it i read the 24c02 and wrote an immo off on it but it restores the file to its original file there isnt a 27f010 or 28010 only a big 87c196 does anyone have the connections to read it via x prog
abuuauto
13th October, 2011, 07:00 AM
hi,members l have same problem on audi A4, 1.8 petrol modell 1999-2000 bosch ecu 0 261 203 938/939. 8D0 907 557C .l read 24c02 to make immo off and i disconect immo box the car start fine but if l switch off the car immo it came back and start and die in second.please any on have idea of this problem?. thanks
ecufix
13th October, 2011, 08:21 PM
Use this unplug immo box
keygargoil
14th October, 2011, 02:36 AM
i still have the issue with mine does anhyone know the ecu connections so i can read the flash
keygargoil
14th October, 2011, 03:04 AM
i still have the issue with mine does anhyone know the ecu connections so i can read the flash
these are the files ecu 24c02 and the off file
immo box file 93lc46b
and even the dash file
some one please help me sort this piece of shit out
immokill
14th October, 2011, 03:33 AM
Hi
Here is some help.
Regards
bram380
14th October, 2011, 03:37 AM
ECU Pin Out for BDM, Flash, Boot, etc:
Flasher-Instruktion - OBD-Wiki (http://wiki.obdtuning.com/?title=Flasher-Instruktion#Audi)
immokill
14th October, 2011, 05:31 AM
Hi
i did it with labtool48 ..years ago .
It has OTP EPROM flash .you can only readi it!!!! New eprom is needed for prog.
I think immo off is in checked 24cxx dump, but only need to remove key reader from ign lock.
Regards
zoro1
14th October, 2011, 09:46 AM
desolder pin 7 of 24cXX and solder it to pin 8 ,so can not be programed by Immo
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.