IMMO OFF IAW 1AF.1G FIAT ECU

[pnj]

Hi

Can anybody help have to exchange ECU in foat with IAW 1AF.1G ECU
Car does not start with used ECU and therefore need Immo off or virgin

The type with TMS374 and 28pin Rom

Attached is dump from TMS374

Hope some can break this

Thanks in advance

[vanos batam]

Hi

Can anybody help have to exchange ECU in foat with IAW 1AF.1G ECU
Car does not start with used ECU and therefore need Immo off or virgin

The type with TMS374 and 28pin Rom

Attached is dump from TMS374

Hope some can break this

Thanks in advance


try this one

[delio78]

try this working tested

[guillermoberenguer]

try this working tested

a question.
I'm trying to do this inmo off.
inmo off the file is written in a 27C512, is inserted into the engine unit is given contact, wait 30 seconds and the engine is started or 27C512 ori is inserted and the engine is started377665
I need to know if just put in the 27C512 with inmo off and start.or conversely to contact for 30 seconds and then put the 27C512 ori and start

upload my original fileI need to know if just put in the 27C512 with inmo off and start.or conversely to contact for 30 seconds and then put the 27C512 ori and bo

[guillermoberenguer]

try this working tested
the file runs, checked.
just type a new 27C512 put it in the zocalo and the vehicle starts.
thanks

[Hack01]

Hi
I want to do immo off. Should I insert the M27C512 from Immo of a start vehicle and then insert the original 27C512 from the original file?
Thanks