View Full Version : suzuki baleno immo i need dump
cardiag
4th October, 2011, 03:39 PM
hello,
i need paired dump from ECU and immo box
Suzuki baleno '96 1.6 benzin
ECU: 6R 33920-60GS0 Denso TC97101P
Immo box: 33970-60G00 TOKAI RIKA 93lc66
bram380
4th October, 2011, 03:50 PM
read eeprom from ecu & immo box.
post at here.
DK members will help you.
gadroulll
4th October, 2011, 04:25 PM
if car not statred you can change immobox and copy the data 93c66 to the other box ,it will work
immobox dies in this cars
LATTINO
5th October, 2011, 03:53 AM
hello,
i need paired dump from ECU and immo box
Suzuki baleno '96 1.6 benzin
ECU: 6R 33920-60GS0 Denso TC97101P
Immo box: 33970-60G00 TOKAI RIKA 93lc66
you have instruction in pm
do it and report please
Nevidimia
21st August, 2015, 04:18 PM
Hi,
i need some one pair this Orig dump from ECU: 6R 33920-60GS0 Denso TC97101P and Immo box: 33970-60G00 TOKAI RIKA 93lc66
Suzuki baleno '96 1.6 benzin
327540
ngakson2002
22nd August, 2015, 09:20 AM
Hi,
i need some one pair this Orig dump from ECU: 6R 33920-60GS0 Denso TC97101P and Immo box: 33970-60G00 TOKAI RIKA 93lc66
Suzuki baleno '96 1.6 benzin
327540
Hello Mate,
If your customer can accept to carry out immo off, follow the steps listed below
1) desolder (remove it completely) the eeprom TC9710P from the engine ECU
2) Disconnect the immobox
3) Plug back the engine ECU and start the car
Best Regards
zanovo
7th June, 2021, 03:18 PM
Suzuki Baleno 1999 1.3L MT
ECU Denso 33920-61GC0 TC97101P eeprom
IMMO 33970-60G02 93LC66 eeprom
Key 4C
Looking for synchronisation or working couple
IMMOoff solution from previous post doesnt work/
speedservice
9th October, 2023, 02:04 PM
Hello
can someone synchronise my dumps from Engine ecu and immo box from suzuki Baleno please?
Engine ecu is Denso 33920-61GA0 TC97101 EEPROM
Immo box 33970-60G00 93LC66 EEPROM
ID key is A8D801
Thank in Advance!!
speedservice
10th October, 2023, 05:46 AM
Can someone to help please?
sawp g16b
10th October, 2023, 04:25 PM
hi all,
I am making the swap in my Samurai, so i have decided to mount the engine suzuki baleno 1.6 g16b with ecu 6M denso 33920-65g6 , but when i bought the engine, only buy the minimum harness (sensors and little box fuses, and without inmo box. then as far i know for start to engine should be have the inmo and the keys, things that i havent, someone could you help me to remove the inmo of my ecu for it can start it
the Eco is 6M 1.6 EU
33920-65G6 BRAND DENSO below i attach the eeprom information and photos of my ECU
speedservice
11th October, 2023, 11:47 AM
hi all,
I am making the swap in my Samurai, so i have decided to mount the engine suzuki baleno 1.6 g16b with ecu 6M denso 33920-65g6 , but when i bought the engine, only buy the minimum harness (sensors and little box fuses, and without inmo box. then as far i know for start to engine should be have the inmo and the keys, things that i havent, someone could you help me to remove the inmo of my ecu for it can start it
the Eco is 6M 1.6 EU
33920-65G6 BRAND DENSO below i attach the eeprom information and photos of my ECU
put the ecu on the car without eeprom inside and try to start.
tell us the results !!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.