SPINTER IMMO MCU READ

[makura]

Hi guys

I have here a MB SPRINTER immo box with mc68hc08az34a with mask 4L52H and i want to read it with my xprog-m but this mask is not on the list,if i try using mask 0J66D it reads but the data come as AD AD AD right through the whole file.
Has any one faced this problem before?is it in my wiring of i need to read it as something else?

[makura]

By the way its a 2002 412D

[icogsm]

skip securiti !
B.R.

[makura]

skip securiti !
B.R.
What do you mean?
If its a question the answer is yes it does pass security and reads but all get is rubbish data.

[joubliss]

Select MC68HC08AZ32 and Skip Sec.

[makura]

Select MC68HC08AZ32 and Skip Sec.
ok one minute..

[makura]

Select MC68HC08AZ32 and Skip Sec.
Ok,i have selected MC68HC08AZ32,how do i skip security?when try reading it says communication error(1)

[joubliss]

Select : Device - Skip Sec

[squirrelbandy]

make sure you have entered security bytes in enviroment settings
F1 6A FA 04 - E4 DA FA 04

[makura]

make sure you have entered security bytes in enviroment settings
F1 6A FA 04 - E4 DA FA 04
put in the security bytes,and now i get device is silent error.i am using xprog-m and i dont see the option to skip security

[makura]

Update''''''
Device read,selected MC68HC08AZ32(0J66D) and added the security bytes F1 6A FA 04 - E4 DA FA 04(thanks to squirrelbandy (http://www.digital-kaos.co.uk/forums/members/96388-squirrelbandy/)) and it read just fine.

[squirrelbandy]

glad to hear you read successful :top:

[makura]

Now that the chip is read, i cant get the key logic right any one help?

[HONDA C]

Now that the chip is read, i cant get the key logic right any one help?


your keys.pass pm
regards

[makura]

your keys.pass pm
regards
So what tool did you use?AD900?on the MB sprinter,vito "START ERROR" V1.3 software it says key 1=788A2FC576 and key 2=9C586A9AFB
So which one is right here,the car is a bit far away so driving all the way with the wrongly coded key would be a waste.

[HONDA C]

[QUOTE=makura;1280419]So what tool did you use?AD900?on the MB sprinter,vito "START ERROR" V1.3 software it says key 1=788A2FC576 and key 2=9C586A9AFB
So which one is right here,the car is a bit far away so driving all the way with the wrongly coded key would be a waste.[/QUOT

generated from tango .now you have modify the dump from immobox and from ecu with help from this soft or post the ecu dump (inside have sp08c3 or 24c04)
regards

[makura]

[QUOTE=makura;1280419]So what tool did you use?AD900?on the MB sprinter,vito "START ERROR" V1.3 software it says key 1=788A2FC576 and key 2=9C586A9AFB
So which one is right here,the car is a bit far away so driving all the way with the wrongly coded key would be a waste.[/QUOT

generated from tango .now you have modify the dump from immobox and from ecu with help from this soft or post the ecu dump (inside have sp08c3 or 24c04)
regards
Ok,but my question is still which is the right key logic?the one generated by TANGO or the one displayed by the START ERROR repair software?
Its amazing how one truck can have so many key logic contradictions...
TANGO key 1=66 0F 78 8A 2F C5 76 E1
AD900 KEY 1=66 F0 1E 51 F4 A3 6E 87
MB ERROR SW=76 8A 2F C5 76
Any one know which one is garanteed to start my truck?
help please.........

[HONDA C]

[quote=HONDA C;1281126]
Ok,but my question is still which is the right key logic?the one generated by TANGO or the one displayed by the START ERROR repair software?
Its amazing how one truck can have so many key logic contradictions...
TANGO key 1=66 0F 78 8A 2F C5 76 E1
AD900 KEY 1=66 F0 1E 51 F4 A3 6E 87
MB ERROR SW=76 8A 2F C5 76
Any one know which one is garanteed to start my truck?
help please.........


from the beginning what problem has the car?

[makura]

Lost keys and has start error now after they tried using a new un-coded key

[HONDA C]

Lost keys and has start error now after they tried using a new un-coded key

ok
write the new key with my first key dump and after modify the immobox and ecu dump with programme which i post and it will be start the car
.if you cant fix the immobox and ecu dump post the ecu dump and i will make it for you

[makura]

Ok thanks,truck started using the AD900 key logic.Thread closed.

[actionx]

Hi guys sorry to bring up a old toppic i need pin out for xprog m to read the same mcu

[Shmortz]

here is user manual

[nokwueze]

pls friends how can i read the vito with xprog