PSA EDC15C2 service history

[vey81]

Hi guys,
I ask for advice and assistance. Does anyone have the software ECU-Tool V00.05?
What bothers me: I need to change(required values ***8203;***8203;attached) or delete service history in the EDC15C2 ECU or virgin eeprom file for this ECU.

307 2.0HDi, EDC15C2
0 281 010 779
96 446 061 80

Thank you for your help

[lee_hdi]

ECU tool v00.05 is insanely hard to find, searched for hours and never found it.

Only ever found one link on immo-code.net but that forum is dead =/

[Meat-Head]

*BUMP*

Is this that STUID 50 erases?

What happens? - does it turn ECU into a pumpkin?

[gezame]

*BUMP*

Is this that STUID 50 erases?

What happens? - does it turn ECU into a pumpkin?

Hi
"EDC15C2 service history "
Every time you make a erase DTCs in these ECU edc15c2, service history increases, when it reaches a value of 50, any subsequent dtc is stored in the ECU , but do not can be erased with diagnosis , incuding the original interface (if the ecu goes limp-mode, and never leaves).
B.R.

[vey81]

ECU tool v00.05 is insanely hard to find, searched for hours and never found it.

Only ever found one link on immo-code.net but that forum is dead =/


exactly the same symptoms:toilet:

[elchip]

Hi guys,
I ask for advice and assistance. Does anyone have the software ECU-Tool V00.05?
What bothers me: I need to change(required values ***8203;***8203;attached) or delete service history in the EDC15C2 ECU or virgin eeprom file for this ECU.

307 2.0HDi, EDC15C2
0 281 010 779
96 446 061 80

Thank you for your help
Make virgin eeprom and perform telecode , after finished service counter will be 0.
Beafor perform virgin memorize screen to you have in backup ECU telecoding option from original so you will do it again in minute ;-)

Regard's

[vey81]

How to make this ECU eeprom virgin? Fill FF and configurate by PP2000?
Any idea?
thx

[Meat-Head]

awsome, just wait untill you come across one if them tricore dodeccahedraion processers, mcu, eeprom and flash in one lol

fill it full of ff see what happens

[vey81]

awsome, just wait untill you come across one if them tricore dodeccahedraion processers, mcu, eeprom and flash in one lol

fill it full of ff see what happens

O.K. Meat-Head
clear that it will not work.lol

[Meat-Head]

well like others say, immo off there is some recent threads aout them on here

it's frogench, you got nothing to loose

[vey81]

well like others say, immo off there is some recent threads aout them on here

it's frogench, you got nothing to loose


you're right as always:jiggin:

[Meat-Head]

you're right as always:jiggin:
DAMM can't find the post, but member Z786 things i'm correct only 80% of the time.

[vey81]

Of course, this intervention does not work :-)
ECU is locked, even if it remains registered pin code. pps says that the ecu was already once paired with the BSI and can not configure it, esp as FAP, etc.:bawling:

[pandora6]

Probably it will help

[vey81]

problem solved
thank you very much. I used a virgin file and configured.
thanks for your help:D

[Meat-Head]

can you upload the virgin file to this thread to make life easier next time - with no password

[vey81]

can you upload the virgin file to this thread to make life easier next time - with no password

Perhaps you disappoint:bawling:
This change is only for this ECU. Not counting that will be used globally, because the ECU configuration remained intact in terms of ESP,tempo,cooling fan,presostat, FAP, joining BSI, pin, mileage, maybe just an idea and compare changes.
Of course, disappeared faults and service history.
I also had to relearn the key. I know it's jagged but it is functional

I can still add the exact configuration of the ECU in the event of interest.

Good luck

[BubbaFet]

Hi
"EDC15C2 service history "
Every time you make a erase DTCs in these ECU edc15c2, service history increases, when it reaches a value of 50, any subsequent dtc is stored in the ECU , but do not can be erased with diagnosis , incuding the original interface (if the ecu goes limp-mode, and never leaves).
B.R.

NOT right, you can erase DTC just fine, but you cannot store a service log once deleted the errorcodes.


anybody with a vurgin image? The ones here will not becoded with diagbox, since they have been coded once.