Citroen C5 2.2 hdi EDC15C2

[kusasusa]

Hello!

The problem is with the old original Ecu 0281010886 because it is destroyed. From him I could only read the EEPROM contents (st95p08), Flash was not possible (29f400BT).
I have one used Ecu with code 0281010808. I wrote in the content of EEPROM (original dump) and flash its database for the same model, which I enclose in attachments.When inserting the ECU in the car, it does not ignite in the state and condition of the Ecu show massage that the computer is locked (Lexia).

original: 0281010886
Used other:0281010808

Is it possible to make a solution for immo off the ECU and what do you recommend?

Best Regards!

Kusasusa

[immokill]

Hello




Is that ecu 0 281 010 808 working ,is it checked ?

EEPROM 9p08 readied from yours ecu already without immo !

Put these files and try to start engine


Report please :top:


Regards

[kusasusa]

I tested your file , but a car not start.
When I made the diagnosis of thy fillet, the tester did not find ecu. As the first test I just changed the eeprom and be the same again. After replacing the program again 0 281 010 886, the tester and then connect again illustrates that in the attachment.

Maybe other solution?Can you immo off for eeprom original 886 and flash 886?

Best Regards!

Kusasusa

[dune85872005]

ecu 0281010886 have ms10.1 injection and ecu 0281010808 is ms 11.1 if they have same motherboard you can write flash from 0281010886 in the second ecu and orig eeprom file immo off is in flash.....i will atach a copy from 0281010886 29f400bt .....test and report....copy whith immo off