PDA

View Full Version : Honda Civic 06 SNA-A216-M1


lawdog1
10th October, 2011, 08:30 PM
Hey guys,

I tried clearing this one the way I've done other civics. I get 54-50 Internal Failure of the SRS Unit. Anyone can please look at me dump and clear and see what I've done wrong?

Thanks!
alex1g35
10th October, 2011, 10:26 PM
hmm.. looks good to me.. same way i do it. maybe a fuse?
Zapp
10th October, 2011, 10:32 PM
:top:Try this and report

Your file on the right both pics
lawdog1
10th October, 2011, 10:47 PM
hmm.. looks good to me.. same way i do it. maybe a fuse?

Hey man, I saw your post where you had the same problem with the same module. How did you end up fixing it?

I am also able to read a code for the seat belt ... so there is communication. I wonder if the seat belt has to be fixed first?
TISHKA25
10th October, 2011, 10:47 PM
Check...Pass in PM...
lawdog1
10th October, 2011, 11:03 PM
:top:Try this and report

Your file on the right both pics


Thanks for the response, but I don't think this is correct because you are clearing the ID data of the module
lawdog1
10th October, 2011, 11:04 PM
Check...Pass in PM...

Thanks, going to try it now
lawdog1
10th October, 2011, 11:21 PM
Check...Pass in PM...

same code ... :(

may be the unit itself.
alex1g35
11th October, 2011, 06:58 AM
i dont think so... I remember i had the same problem with a hybrid civic... also said internal failure, but the owner drove around and finished fixing his car and the light went off... maybe the problem is with the car...
Zapp
11th October, 2011, 01:24 PM
Did you try mine??:tomato:
lawdog1
11th October, 2011, 03:06 PM
Did you try mine??:tomato:

Hey Zapp,

I did not. I appreciate your suggestion, but you cleared lines 320 and 330 which contain the module serial numbers. Even a new one from the dealer will have these lines programmed.

Have you cleared another civic before like this??
Zapp
11th October, 2011, 04:35 PM
Its an Ultraprog fix,so not tried myself yet...thats why i ask
lwood
11th October, 2011, 04:38 PM
this is the way i do them. all the time. i fix these civic modules around every day.
if this doesnt work then your module is bad.
lawdog1
11th October, 2011, 06:55 PM
this is the way i do them. all the time. i fix these civic modules around every day.
if this doesnt work then your module is bad.

no go ... must be the module or something else shorting the module ... i tried programming a dump from another module and it gave me just the seat belt buckle pretensioner and OPDS/OPD internal fault codes, without the srs internal fault code. Once I initialized the OPDS/OPD, then the SRS unit internal failure code reappeared ...
lwood
11th October, 2011, 07:05 PM
yes bad module.
it happens time to time.
icogsm
13th October, 2011, 12:08 PM
may by have EEP2 inside in this module (95C320)
b.R.
tima
18th October, 2011, 05:50 AM
I've done hundreds of these..roughly 1% of the time you will get a bad module. rare...but it happens.
lawdog1
19th October, 2011, 05:49 PM
I didn't get a chance to try icogsm's suggestion above, and anyway, he never sent me a password to the file, but the problem was fixed by installing a different module.
Air
22nd October, 2012, 06:56 PM
may by have EEP2 inside in this module (95C320)
b.R.

Hi
I have the same problem: "54-50 Internal Failure of the SRS Unit". While I'm sure the dump is cleared in right way

Can you send me the pass for your second dump (25320)for Civic module 77960-SNA-A216-M1. I'll try to fix in this manner

Thank you so much