PDA

View Full Version : code injectors to ecu



Maxpower50
10th October, 2011, 08:40 PM
eny nows which tool can code Renault Kango Injectors to ecu

slavisac
10th October, 2011, 11:35 PM
If some tool can,that would be Renault clip.

avtonega
11th October, 2011, 01:19 AM
BOSCH Kts 100%
Texa 100%

electrix
11th October, 2011, 05:53 AM
I didn\'t code injectors in Kangoo, but in other Renaults eg. Megane, Laguna with Launch Diagun and works fine.

Youneselm
26th October, 2011, 06:30 PM
Multidiag is ? good and cheep tool.

bodzio012
26th October, 2011, 10:02 PM
I didn\'t code injectors in Kangoo, but in other Renaults eg. Megane, Laguna with Launch Diagun and works fine.

Have you 1.9 or 1.5 dci??? !.9 not must coding only 1.5 dci.

electrix
27th October, 2011, 06:20 AM
Injectors must not coding in 1.9 EDC15C2 but must in 1.9 EDC16C3.

bursuc
27th October, 2011, 10:20 AM
Try Delphy ;)

alfabit
3rd November, 2011, 10:56 AM
eny nows which tool can code Renault Kango Injectors to ecu

Anybody thought about the cheapest, simplest, really useful Reno tool, DDT2000 ?

kool_mi
3rd November, 2011, 11:23 AM
x431 100% ALL TOOLS CAN DO

ammarben
3rd November, 2011, 09:32 PM
the cheapest, simplest,useful Renault tool,is DDT2000
i have posted a schematic interface KKL which work very well
i have tested it with clio 2004 1.5DCI

Maxpower50
20th May, 2012, 03:32 PM
I have now diagun and like to code Injectors on A fiat ducato 2,2 jtd 2007 modell Eny nows how to do it

smayer
20th May, 2012, 03:38 PM
Autocom can do.

Maxpower50
20th May, 2012, 04:07 PM
Which Prosedure to use
I have autocom to

otojm
21st May, 2012, 08:34 PM
Which Prosedure to use
I have autocom to
hi i don't know for autocom but with kts,i go to diagnostic>engine ecu>adaptation>injector
(before do it you must note the code of injectors,and the position of the first one!).
i think this is a general procedure for all tool if it's implemented yet by the manufacture of the tool and supported by the engine-ecu.hope this can help you to understand this process.

admiralx
24th May, 2012, 08:19 AM
Which Prosedure to use
I have autocom to....write in ecu ,,,,

clautosing
28th May, 2012, 09:03 PM
eny nows which tool can code Renault Kango Injectors to ecu

almost any universal diagnostic equipment can do this, but the best is Renault Can Clip.

but why do you want to write injector code ? did you change one of it ?

luis12
3rd June, 2012, 05:41 PM
Read a label in each inyector and record, go to special funtions, code inyectors and follow indications only if you changed inyectors or misspositioned, check values on scanner and compare fisically .

ghostridersa
4th June, 2012, 07:50 PM
launch Diagun

Shortie
25th June, 2012, 07:30 PM
Sykes ACR4 MAP can code the Clio 1.5dci so probably can do other 1.5dci models.

busaman
27th June, 2012, 07:17 AM
DEC superscan 100% also 1.9dci with imi must code injectors.