blade BM7000s-05-10-11-7ex

[delboy13]

BM7000s-05-10-11-7ex

IMPORTANT UPDATE - BM7000s - October 5th

All users are recommended to upgrade.


1.Fixed rare standby problem - Sometimes receiver does not exit standby correctly.

2.Better compatibility with USB devices - More hard drives are now ready to work with the receiver.

3.You Tube more stable.

4.Streaming video stability improved.

5.Blade Online updated.

6. Other minor problems have been fixed.

[zee24]

is this the official or the patched version?

[delboy13]

think this the patched one as last one had x on the end and offical when ends with e

[fylton03]

THANK
WORKS GREAT

[grubbyears]

Many thanks

Cheerz

[zee24]

yh think it's the patched version as it has he 9991 menu and works with mine, but not seen anything different then the beta version from september

[jon48]

this new fw on my blade does not have the 9991 option.....:manutop:

[vorlon2257]

9991 menu works for me on this latest firmware

[jon48]

9991 menu works for me on this latest firmware
hi m8 is your box the combo 1 with tuner

[zee24]

@jon48 as this thread states this new firmware is for the BM7000s NOT for the combo box.

[vorlon2257]

It's not the Blade Combo, it's the Blade BM7000s

[jon48]

hello lads ive got it sorted i will not mention the site were i got my fw from but it was the wrong 1 ive dloaded this 1 on this site and it works the 9991 option many thanks lads .......:manutop:

[joetwizzy]

thanks, appreciate this.

[markedz]

is this ok with my lines
as i dont wanna lose them,as they were prepaid for with box

[vorlon2257]

make a note of them first on some paper. or you will loose them

[markedz]

make a note of them first on some paper. or you will loose them

didnt get em when i got box,guess im stuck with older f/ware then cheers

[zee24]

didnt get em when i got box,guess im stuck with older f/ware then cheers

go to any channel and press 9991 on your remote a menu should appear and in there you will find your cline, just note everything down and your good to go.

But you won't lose your cline when updating firmware you only lose them when you factory reset the box, but id still make a note of them just in case.

[markedz]

go to any channel and press 9991 on your remote a menu should appear and in there you will find your cline, just note everything down and your good to go.

But you won't lose your cline when updating firmware you only lose them when you factory reset the box, but id still make a note of them just in case.

they are password protected by seller,and he aint been seen since april,so i dont no what he did as it isnt 0000

i updated firmware in may with no probs tho,just dont wanna do it and lose em,as it will be another sub then

[zee24]

you wont lose em dnt worry if you upgrade tho. The only way to overite the password is to do a factory reset but then you will deffo lose the cline n the info but i could be wrong.

Like i said you won't lose the cline if your just doing a firmware update

[mark8393]

they are password protected by seller,and he aint been seen since april,so i dont no what he did as it isnt 0000

i updated firmware in may with no probs tho,just dont wanna do it and lose em,as it will be another sub then

Try 9996 mate

[markedz]

Try 9996 mate

cheers wasnt that combination,how many tries to do you get,cud be any amonunt of combs

[mayne1872]

05-10-11 with the 9991 menu please

[zee24]

05-10-11 with the 9991 menu please

if you want that update its on the 1st page before this one

[ulrich100]

If this firmware doesn't solve my ip dropping problems, I shall be posting a video of Blade Vs sledge hammer.

[mupster]

Hi fellas,

I wonder if anyone can help me...

Whenever I switch channels via the number pad on the remote, the box seems to lose its signal and I get a 'no video/audio' message on the screen. I then have to swtch the unit to stanby and back on for the channel to show up. It doesn't happen if I switch channels via guide or prg up/down.

Any ideas?

[irishbluestaffy]

do u have the latest software on it as i had this trouble on old software.

[4sparx]

Just downloaded the latest BM7000s firmware from 1st page BM7000s-05-10-11-7ex, have noticed it does not end with .stb just ends with 7ex, before I flash my box and it goes flash, am I rigfht in saying to rename the unzipped file so it ends with .stb then the box will recognise it? :)

I renamed the file, ending it with .stb so the box would see it, it does see the file but as soon as you try to load it, "Invalid STB file", tried renaming it ending with 7e.stb to no avail, has anybody else had this problem, the blade took tha last firmware with no hickups

[irishbluestaffy]

u dont need to rename it m8 just flash it as it is thats wat i did.

[4sparx]

Its not seen as a file on the memory stick although it is there cause I just put it there, wierd, will give it another go, I am in utils, download, and as soon as I select the file, it tries to read then says "Invalid STB file"

Just downloaded the zip file again, its writing to the blade as I write, the file must have become corupt as I unzipped first time around, box reads 100% success, excellent, thanks for the updated file with the 9991 option, great

[3333]

http://www.digital-kaos.co.uk/forums/attachments/f11/83738d1318371825-blade-bm7000s-05-10-11-7ex-bm7000s-05-10-11-7ex.zip

[clearblue]

Thanks for the link I'm hoping this version is more stable.

[singhisking]

Folks, when I try an unrar the file, i keep getting an error.
"unexpected end of archive"
Any ideas on what's causing this?

[needy]

Folks, when I try an unrar the file, i keep getting an error.
"unexpected end of archive"
Any ideas on what's causing this?

i tried to download this for a few days getting same error, tried it on another laptop worked first time, strange as iv downloaded alot from this site on my laptop

[vkerai]

Does anybody have the latest patch for the BM7000s i think the version is 05-10-11 also the latest channel list.

[xopalx]

Hi guys, Is everyone happy with this version or are there some issues.
Has the router issue been sorted out yet?

[irishbluestaffy]

all good with mine

[ToshibaNull]

Cheers lads

[rupeshbmnoob]

Hi people!

In my epic quest to learn more about the Blade before I buy it, I want to know, does this latest patched f/w allow for the EPG to be saved on to USB or does it get deleted when the box is in standby?

[joetwizzy]

Hi people!

In my epic quest to learn more about the Blade before I buy it, I want to know, does this latest patched f/w allow for the EPG to be saved on to USB or does it get deleted when the box is in standby?

Saved to HDD. Not well tho, a bit intermittent.

[rupeshbmnoob]

Is there anyway to configure the channel numbers on an .ndf channel list. I can't find any option to configure the channel numbers on NDFedit.

For example, I want 101 to BBC 1 instead of 001. Similarly, I want 503 to BBC News and not just some random number.

I want the channel numbers on the Blade to mirror that on a sly box.

Can this be done on the computer using any software or will I have to do this on the blade box itself?

You must think of me to be so bizarre to worry about such trivial things before I even purchase the Blade! :eek:

[zee24]

cheers for asking im looking for the same info if its available, hope someone can help

[joetwizzy]

Is there anyway to configure the channel numbers on an .ndf channel list. I can't find any option to configure the channel numbers on NDFedit.

For example, I want 101 to BBC 1 instead of 001. Similarly, I want 503 to BBC News and not just some random number.

I want the channel numbers on the Blade to mirror that on a sly box.

Can this be done on the computer using any software or will I have to do this on the blade box itself?

You must think of me to be so bizarre to worry about such trivial things before I even purchase the Blade! :eek:

First thing I tried when I got my first dream box. I tell you, it isn't worth the hassle. You have to have blank channels.

[ramjet]

Is there anyway to configure the channel numbers on an .ndf channel list. I can't find any option to configure the channel numbers on NDFedit.

For example, I want 101 to BBC 1 instead of 001. Similarly, I want 503 to BBC News and not just some random number.

I want the channel numbers on the Blade to mirror that on a sly box.

Can this be done on the computer using any software or will I have to do this on the blade box itself?

You must think of me to be so bizarre to worry about such trivial things before I even purchase the Blade! :eek:

not really possible on any box as you would have to fill the spare slots with blank channels in order to achieve this , and that means 100 blank channels before you even start , and hundreds more to get sky news onto 503

these boxes have a favourites section , so you just add all the news into news , kids channels into kids , film channels into movies , sports into sports etc

then just use the categories in order to get to the genre required

I have bbc1HD on 1 , bbcHD on 2 , itv1HDgra on 3 etc in my favourite list

[jace b]

Just got my BM7000s this week after my dreambox 500 died. its better than i expected.
HD is great, definately worth the money....
does anyone know if blade BM7000s-05-10-11-7ex is the latest 3rd party software for the box..??

[dadon123]

Yes this is currently the latest and greatest :)

[OROURKE76]

Many thanks

[zee24]

this aint the latest

5/01/2012 is the latest