Dynamitik
12th October, 2011, 05:22 PM
Hello friends!
I need your help to properly remove the DPF from the ECU:
Passat B6 MT 2007
Siemens PPD1.2G 03G 906 018 EM
2.0Dti 170Hp
Also I ask to check up my variant of removal DPF made by means of program ECUSafe 2.0. With a file ecu_03G906018EM_FAP_OFF_CS_OK.bin the filter bulb was lit through 60 km after reprogramming ECU and has gone out when ignition off then on. The percent of filling of the filter 75.3 is equal in the block of measurements of 20 %. DTC isn't present. DPF it is physically removed, the gage of a difference of pressure is disconnected.
All files in archive. Thanks in advance.
I need your help to properly remove the DPF from the ECU:
Passat B6 MT 2007
Siemens PPD1.2G 03G 906 018 EM
2.0Dti 170Hp
Also I ask to check up my variant of removal DPF made by means of program ECUSafe 2.0. With a file ecu_03G906018EM_FAP_OFF_CS_OK.bin the filter bulb was lit through 60 km after reprogramming ECU and has gone out when ignition off then on. The percent of filling of the filter 75.3 is equal in the block of measurements of 20 %. DTC isn't present. DPF it is physically removed, the gage of a difference of pressure is disconnected.
All files in archive. Thanks in advance.