PDA

View Full Version : renault clio pin label



synkrotronic
13th October, 2011, 07:50 AM
Hi
It is possible to get pin from label inside key : EUA1JYYY

Thanks

albertros
13th October, 2011, 08:04 AM
Hi,
try 7934

KILL_THE_IMMO
13th October, 2011, 08:46 AM
7934 IS UR PIN

synkrotronic
13th October, 2011, 07:29 PM
7934 IS UR PIN

Sorry what do you mean "UR"

Going to try and will tell something

Regards

synkrotronic
14th October, 2011, 07:20 AM
Hi,
try 7934

The code is correct,but engine don?t start.
The light is off,maybe having problems with unit under dasboard.
When get communication,have the information that,injection,airbag and others are not present,try to adapt and still the same.

Thanks one more for the code

Regards

albertros
14th October, 2011, 08:55 AM
Hi,
post year engine ecu.

Try clio 2 not clio 2/3 etc on clip as this will look for multiplex network.

Common faults
red button near battery needs reset or plug not pushed on all the way.

Little black relays near battery, small fuses in same box

2 amp fuse in fuse box end of dash

ecu

someone kicked out a fuse under passenger feet bmt.

synkrotronic
16th October, 2011, 10:08 PM
Engine D7F 726
Fuse is ok and when remove it ,red light turn off.
The relays had changed.
Do not have can clip,only access bmt immo by Texa,it accept one remote control and unlock ecu to start engine,but not allways.
On alignment network (units),give me information there are units not present.
Only one time,doing nothing,turn on ignition and the car starts,when stoped,blocked again.
To change bmt only need original eeprom data to adapt?

Regards