View Full Version : ETL software problem HC08 and HC05
roth18
14th October, 2011, 04:57 AM
Hi M8s,
did anyone had software problems with ETL programmers HC08 and HC05? When I start the soft the CPU maxes out and the program just sits there.
Bllinda
14th October, 2011, 08:42 AM
The 908 is not a big problem
for any act, before they burn.
www.digital-kaos.co.uk/forums/f155/clone_etl_908-burned-227741/
And I have trouble with the
705 in more detail here:
www.digital-kaos.co.uk/forums/f155/clone_etl_705-dont-see-lpt-read-writes-230459/
roth18
15th October, 2011, 12:06 AM
The problem is with the software m8. The programmer is OK.
Bllinda
15th October, 2011, 07:49 AM
Etl908 works. About 705 are in
trouble with the soft. In my
case, does not see the LPT port
gcesare21
15th October, 2011, 11:50 AM
Etl908 works. About 705 are in
trouble with the soft. In my
case, does not see the LPT port
Up...
i have same problem..
tried on two pc lpt port not working.:afraid:
Bllinda
16th October, 2011, 07:29 PM
There really is not where people faced with this problem and solved?
Do you have any ideas?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.