nissan radio code help

[laserkill]

hi i need radio code for nissan
serial no CL052440045871
Model pp-2424T
In radio say first wait after 30 sec sey secure i dont know what to read is only on big nec

[smoggy]

don't think I can help but radio here -= CODEDRADIO =- Base navigation (http://codedradio.info/?i=bn&st=CL0524)

[fukukum]

hi i need radio code for nissan
serial no CL052440045871
Model pp-2424T
In radio say first wait after 30 sec sey secure i dont know what to read is only on big nec
L46 eeprom read send forum

[laserkill]

i cant read eeprom 93c46 beacose is roated and i have seeprog i cant read
and like what to read and dose the seeprog have any optione to read it please

[Zoka52]

Seeprog is an excellent programmer.
See what is rotated Eeprom?
http://pdf1.alldatasheet.com/datasheet-pdf/view/74910/MICROCHIP/93C46.html

[fukukum]

i cant read eeprom 93c46 beacose is roated and i have seeprog i cant read
and like what to read and dose the seeprog have any optione to read it please
elnec .....bee.prog ok eeprom 93c46x :top:

[laserkill]

elnec .....bee.prog ok eeprom 93c46x :top:

look i have no original see prog you know look in the pictures i use this with all eeprom. but in roated i dont know why this not work
look my seeprog please is not from original you know.
I need to know like what to read what to change in seeprog software you know.thanks

[murat332]

NISSAN (http://codedradio.info/show.php?p=pics/NISSAN/cy690.jpg&title=NISSAN) CY690 PP-2424T
93C46 ponyprog http://www.lancos.com/e2p/si-prog-v2_2.pdf
Download PonyProg: serial device programmer from SourceForge.net (http://downloads.sourceforge.net/ponyprog/PonyProg_V207c.zip)
93C46 pdf, 93C46 description, 93C46 datasheets, 93C46 view ::: ALLDATASHEET ::: (http://pdf1.alldatasheet.com/datasheet-pdf/view/74910/MICROCHIP/93C46.html)
or
normal eeprom : your programmer pin soket ( out / in )
1-CS
2-CLK
3-DI
4-DO
5-VSS
6-ORG
7-NC
8-VCC
rotate eeprom:your radio eep.pin out / in
1-NC
2-VCC
3-CS
4-CLK
5-DI
6-DO
7-VSS
8-VCC http://forum.gsmhosting.com/ubb/smile.gif

[laserkill]

thankyou very much for all help.
I just need to know if i can read with whis programer seeprog 93c46 rotate. You know only this i needto know. beacose i dont have time to create the new programmer like ponyprog.

[murat332]

elnec yes my friend, see you can read by programmer,
connections necessary to make changes, but the foot :top:

[laserkill]

i dont know but im confused why whis cant work . bu i like to know if i just need to search on seeprog eeprom like only 93c46 or any thing els. maby you know what i want. sorry for my bad language. i have olways problem with this radio you know like clarion and pioneer japan radio.thankyou very much

[Argento7]

You can add some wires between your programator (Seeprog) and soic8, to read chip out of mainboard... must read in 16 bits

[Argento7]

NISSAN (http://codedradio.info/show.php?p=pics/NISSAN/cy690.jpg&title=NISSAN) CY690 PP-2424T
93C46 ponyprog http://www.lancos.com/e2p/si-prog-v2_2.pdf
Download PonyProg: serial device programmer from SourceForge.net (http://downloads.sourceforge.net/ponyprog/PonyProg_V207c.zip)
93C46 pdf, 93C46 description, 93C46 datasheets, 93C46 view ::: ALLDATASHEET ::: (http://pdf1.alldatasheet.com/datasheet-pdf/view/74910/MICROCHIP/93C46.html)
or
normal eeprom : your programmer pin soket ( out / in )
1-CS
2-CLK
3-DI
4-DO
5-VSS
6-ORG
7-NC
8-VCC
rotate eeprom:your radio eep.pin out / in
1-NC
2-VCC
3-CS
4-CLK
5-DI
6-DO
7-VSS
8-VCC http://forum.gsmhosting.com/ubb/smile.gif

I think pin 8 is wrong. See image

[murat332]

I think pin 8 is wrong. See image
The 8-pin does not mean anything to give the empty chassis gnd or think:top:

[laserkill]

i try with 16 bit but nothing

[Zoka52]

It is necessary to make a small adapter for a few minutes and read 93c46 rotated.
93C46 pdf, 93C46 description, 93C46 datasheets, 93C46 view ::: ALLDATASHEET ::: (http://pdf1.alldatasheet.com/datasheet-pdf/view/74910/MICROCHIP/93C46.html)

[laserkill]

thanks zoka i will try.

[laserkill]

It is necessary to make a small adapter for a few minutes and read 93c46 rotated.
93C46 pdf, 93C46 description, 93C46 datasheets, 93C46 view ::: ALLDATASHEET ::: (http://pdf1.alldatasheet.com/datasheet-pdf/view/74910/MICROCHIP/93C46.html)

look i have read the eprom from roated in normal but look if is ok and unblock the security code you know.i hope is good dump.

[laserkill]

look
0000000000-AAAA 0248 0000 0001 571D B131 0000 FFFF

[smoggy]

try 0248 or 8420

[laserkill]

how to try when radio is on security i need first to exit security

[Zoka52]

0000000000-AAAA 0248 0000 0002 571D B131 0000 FFFF

[giarod]

please help mi for radio code!
philips car400
gm0400x2273769

[laserkill]

0000000000-AAAA 0248 0000 0002 571D B131 0000 FFFF
so we need to change from 0001-in to 0002 so this can unlock
this SECURITY

[juisro]

please help mi for radio code!
philips car400
gm0400x2273769


Hey, man you do not need several posts. Regards

http://www.digital-kaos.co.uk/forums/f176/car-400-philips-229607/

[Argento7]

so we need to change from 0001-in to 0002 so this can unlock
this SECURITY
I think Zoka is showing you COUNTER RESET!

[Argento7]

Hey, man you do not need several posts. Regards

http://www.digital-kaos.co.uk/forums/f176/car-400-philips-229607/
Hi Juisro! He need several post because He cant read/write your own dump...
Regards, nice to see another Argentinean here!
Saludos! Que bueno ver otro Argentino por aca!

[juisro]

Hi Juisro! He need several post because He cant read/write your own dump...
Regards, nice to see another Argentinean here!
Saludos! Que bueno ver otro Argentino por aca!


Hey, buddy, this is not the problem, in both post is well uploaded the file, not like other forums where you can not post dumps. The forum is excellent for those who want to learn, you just have to keep and help we can to that end. Regards

Hola , compa?ero , no es ese el problema , en los dos post esta bien subido el archivo , no es como otros foros donde no se pueden postear los volcados . El foro es exelente para los que quieren aprender , solo hay que mantenerlo y ayudar en lo que podamos para tal fin . Saludos

[Argento7]

[QUOTE=juisro;1292267]Hey, buddy, this is not the problem, in both post is well uploaded the file, not like other forums where you can not post dumps. The forum is excellent for those who want to learn, you just have to keep and help we can to that end. Regards

Ohhh!!! I was blind! You was replying to "giarod", not to Laserkill... Sorry, my mistake. And yes, this is the better forum I know, and I am here to help if I can, and to learn from people like you, not only "codes", to be a usefull person and to take care of people learning like me.
Its a real pleasure to be talking with you. Thanks 4 your time!
PS: To much words to translate...! :D