PDA

View Full Version : nissan pathfider 2008 MC 9S12



rodrigonicolas
15th October, 2011, 09:21 PM
Hi, I have a problem with a nissan pathfinder 2008, I read the microcontroller MC cluster 9s12h128vfv 1K87X mask, I used the XPROG, initially corect have read eeprom memory, modify the eeprom memory dump to lower the mileage, then the vehicle cluster works well only for 2 minutes, then the cluster is off, someone could help me.
my question is whether to modify only the eeprom or flash also?

nimnul
15th October, 2011, 09:31 PM
There is a dump of a bar .
PART 24810-EA31A
CONFIG CODE 0727031508
VP5NEF-14A608-AD
PWB12906
CPU MC9S12H128VFV - 1K78X
JA XPF1184397
vp5nef-10849
1014925
made in mexico
OMEGA read if I have to reset it.
Sorry for my English.

rodrigonicolas
16th October, 2011, 02:27 AM
thanks friend, I read the dump with XPROG, but also I have the omega programmer could tell me how connect omega to mc MC9S12H128VFV - 1K78X or maybe post some pictures.
Thank you.

bluedid
16th October, 2011, 08:01 AM
this dash is the same as navara look http://www.digital-kaos.co.uk/forums/f174/nissan-navara-2005-a-170498/
maybe you should check where you have solder ,solder the points again.

rodrigonicolas
16th October, 2011, 02:35 PM
hello friend, this is a picture of omega MTRK programmer, is different from UPA and XPROG.

MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=MRJ5VBJH)

nimnul
16th October, 2011, 05:57 PM
connect omega MTRK programmer


MC9S12H128/H256 (QFP112)
BKGD:39 - Prog. RxD
RST:40 - Prog. RST
EXTAL:44
VSS: GND

rodrigonicolas
16th October, 2011, 06:28 PM
thanks friend for your help, please show me:
- Whether to change the mileage I have to change only the eeprom or flash memory also?.
- The type of memory is QFP 144, including photographs, the connection is the same?

thank you very much for your help.

MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=EWRLG55S)

nimnul
17th October, 2011, 01:21 PM
only EEPROM