Renault Clio 2000 immobiliser

[charlieof9]

hello, removed the immo with immokiller on the 95160
its a iaw 5nr c2 also i tried a c5
the car starts and runs but next time it won't run until i clear the immo again
i have cut the orange wire 13 on the uch and it still does the same
any help would be much appreciated
thanks charlie

[bartekbartek]

You need make security write in 95160

[charlieof9]

car now runs but leaves glow plug light(engine light)on
i ran immokiller remove immobiliser for iaw 5nr c5 on the 95160
then cut and connected terminal 30(permanent live) wire to 15 (switched ignition)
still can't understand why the car would only run once after reprogramming the eeprom ,even tried a spare iaw 5nr c5 which did the same,put the c5 in a mk3 clio and no problems just with this mk2 and i cut pin 13 on the body ecu which should be the immo data wire very weird cutting the permanent live did it thou
good luck