Openbox Clone Safe Firmware

[nibblitz]

If you have a Clone Box
I have it on good authority that the best firmware for your Clone Box is
March 2011 Firmware: - 25/03/2011
CONM_CHDS2_CMT_SkyBox.abs

Audio Sync problems apparently resolved in this release, and rebooting problems not as bad.
Its totally clone safe, it will not brick your clone, it does not contain clone killer code.
It will change your boot logo from "Openbox" to a flashier looking "Skybox" logo
Its ok to use this firmware on either the S9 or the S10

So if you're frustrated with your clone box running on its factory firmware, give this a go..
Always system dump your original firmware before upgrading, just in case.
Then it is also a good idea to factory default your box before flashing the upgrade.

[sn00pbox]

Where can I download the latest OpenBox S10 Firmware?

[mtv1]

Where can I download the latest OpenBox S10 Firmware?

http://www.digital-kaos.co.uk/forums/f184/openbox-clone-safe-firmware-233934/#post1297641

dumnno m8 :hmmmm: here i guess welcome to Digital kaos ;)

[archers]

pmsl snoop hmmm maybe the link above m8

ok i have loaded the new firmware on my stuck on box after it burn's the box just turns off no life to it. Turn box on and get stuck on agine so no good for me

[pspmixer]

i have serval openbox s9 clone which all run the latest firmware
in order to update a clone box
first you have to do a factory reset (this gets rid of everything on your box so save what you want)
then update you box via usb update (as you would normally)
then put your details back in e.g sat 28.2, favourite list, tv line etc
this worked for me all the time i have restarted each box 20 times so i dont brick it (been told after 15 times of restarting each box they will be killec/brick)
i hvae put the latest firmware in download section at the top

[joazgroup]

i got clone box with ori ccid..00D0:bawling:

[vun]

I WAS INTERTED TO UPGARDE THIS FW BUT AFTER UPGARDE WHY ALL MENUS BECOME GRAY ??(CANNOT SELECTED)

[estm13]

i'm from malaysia, any safe firmware for clone openbox?

[slugworth]

Why not just leave the receiver on all the time?
As long as it doesn't reboot 10x,you should be fine.
I never turn my receiver off,just the tv.

[samuidiv]

i also just updated with the latest firmware from october 2011. Now it has shown. " You have clone". After that it turned itself off and cannot be turned on again. It just does not react to anything. switched on and off - but same. Any ideas?? Or how I can get back to the old firmware.

thank you

[slugworth]

i also just updated with the latest firmware from october 2011. Now it has shown. " You have clone". After that it turned itself off and cannot be turned on again. It just does not react to anything. switched on and off - but same. Any ideas?? Or how I can get back to the old firmware.

thank you
old style rs232 loader
I would have just left the receiver on all the time.

[volgren]

So does this all mean if I somehow have a clone box which is on factory firmware and has done <10 reboots so far, I can simply do:

1) Factory reset
2) Dump existing firmware to USB
3) Load March 2011 Firmware: - 25/03/2011
CONM_CHDS2_CMT_SkyBox.abs via USb
4) Reboot machine 20 times to make sure it is safe from being bricked?

I don't mind staying on a slightly old firmware if this means no more hassle to rescue down the serial port path...

[nibblitz]

Yes, thats correct..

[kabiela]

i'm from malaysia, any safe firmware for clone openbox?
This is also a clone version
I have also a colleague of mine did his openbox clone S10
and it works very well he is satisfied

http://www.wydvb.com/UploadFiles/SkyBox_S10_110731.rar

http://www.yojiatech.com/uploads/soft/100827/OpenboxS10-2011-7-21.rar
:party:

[pizz86]

hi i installed the firme wire... but its not allowing me to navigate in the menu. its all highlites in black... any help plsss

[nobody2k]

Is that FW working with CS?

[steven789]

Does flashing a new firmware will reset all my channel listing?

[slugworth]

Does flashing a new firmware will reset all my channel listing?
yes,it's a full 4meg load that overwrites everything.
Backup first with usb or rs232 or lan,then load new firmware.

[DX Swift]

Hello

my clone Openbox S11 HD satellite receiver

Despite being a clone

98F2 writes.

No. 1 in the message, the software safe?

This software, Avatarcam Is there ?

[DX Swift]

I threw the software.
Openbox S11 HD flash collapsed.
this is clone safe software huh ?
openbox 'On' remained.
I looked at the openbox does not turn on
I also threw recovery software.

[fidzy]

Where to get clone firmware that can be used without problem?


If you have a Clone Box
I have it on good authority that the best firmware for your Clone Box is
March 2011 Firmware: - 25/03/2011
CONM_CHDS2_CMT_SkyBox.abs

Audio Sync problems apparently resolved in this release, and rebooting problems not as bad.
Its totally clone safe, it will not brick your clone, it does not contain clone killer code.
It will change your boot logo from "Openbox" to a flashier looking "Skybox" logo
Its ok to use this firmware on either the S9 or the S10

So if you're frustrated with your clone box running on its factory firmware, give this a go..
Always system dump your original firmware before upgrading, just in case.
Then it is also a good idea to factory default your box before flashing the upgrade.

[markus625]

Is this safe with a genuine box, wont crash it will it,
bought my openbox s10 from CCTV Cameras UK | Dreambox UK | External Hard Drive UK (http://www.techkers.com/) so hope this is a genuine box and not a clone.

[Manic01]

Clone safe is ok on all stb.

[darcu5]

Is this safe with a genuine box, wont crash it will it,
bought my openbox s10 from CCTV Cameras UK | Dreambox UK | External Hard Drive UK (http://www.techkers.com/) so hope this is a genuine box and not a clone.

I got my s10 from techkers and it's been running septemer firmware since i installed it last october. But if you are worried it maybe a clone and not sure how to check it then the newest uptodate clonesafe firmware is available here http://www.digital-kaos.co.uk/forums/f184/openbox-s10-v2_new_red_gui-by_anonymousx-253796/

[peterdmullan]

Hi all,
I seem to have bricked my openboxs10. Here is what I have done so far.
-Upgraded via usb without taking backup first. Bad move!
-When it was finished I got a 'this is a clone' message.
-When i rebooted there is nothing on screen and 'On' is displayed on front of openbox.
-I have now tried the two firmwares for clones using 'STB EROM Upgrade' tool via null modem cable.
1). CONM_CHDS2_CMT_SkyBox.abs this firmware gave me the same 'on' display with no output to tv
2).HDS2_Openbox_by_anonymouSX_V2_New_Red_GUI.abs this has gotten further with the skybox boot image appearing on tv but it seems to be stuck. it comes on to display 'on' then '6000' then goes to number 4 which is CANAL + HD. Neither the remote or front menu buttons work. :(


Any suggestions??? :(

thanks in advance.
P

[DW190]

Here is the clone safe firmware by anonymouSX with full Uk channel list and time setting in the image.

[Wingnut]

is this ok for openbox s10? also mate do u have a link to were u got it from,i ask so i can follow the page for future updates,thanks
Here is the clone safe firmware by anonymouSX with full Uk channel list and time setting in the image.

[DW190]

is this ok for openbox s10? also mate do u have a link to were u got it from,i ask so i can follow the page for future updates,thanks

It is the Clone Safe by anonymouSX posted on this site. I have it running on a number of boxes without any problems.

The file I uploaded is from my box and was dumped from the box with the UK 28.2 channel file embedded. Upload it to your box and all the settings are done for the UK.

[Wingnut]

hi mate,i flashed your dump onto my orignal s10 and was working brill,after a few reboots the box deceides not to power on,no power whatsoever,i just send it back for a replacement,iv received a new box today and flashed your dump again as i cant get my head around this openbox s10 lol and all is great,im just scared if i reboot a few times it will brick again,is this possible? or was my box just faulty? cheers mate
Here is the clone safe firmware by anonymouSX with full Uk channel list and time setting in the image.

[DW190]

hi mate,i flashed your dump onto my orignal s10 and was working brill,after a few reboots the box deceides not to power on,no power whatsoever,i just send it back for a replacement,iv received a new box today and flashed your dump again as i cant get my head around this openbox s10 lol and all is great,im just scared if i reboot a few times it will brick again,is this possible? or was my box just faulty? cheers mate
There is no problems with this firmware. It is the Anonymus one but it has 28.2 list with all channels to make your box Plug n Play, No need to scan for UK channels.

[Wingnut]

thanks so much mate,now I will reboot it if needed lol,il report back if anything happens lol,ohh and thanks for ur dump,this will give me a chance to try learn about this box while the misses watches tv,thank again

[almadena2]

So does this all mean if I somehow have a clone box which is on factory firmware and has done <10 reboots so far, I can simply do:

1) Factory reset
2) Dump existing firmware to USB
3) Load March 2011 Firmware: - 25/03/2011
CONM_CHDS2_CMT_SkyBox.abs via USb
4) Reboot machine 20 times to make sure it is safe from being bricked?

I don't mind staying on a slightly old firmware if this means no more hassle to rescue down the serial port path...

why should i do this steps and restat 20 time
can any one tell me
thanks

[Manic01]

Because after 10 times reboot if clone can be bricked.

[r0nnie]

so if i have a clone and turn it off 10 times, it wont come back on??

also putting this f/w on the box will allow you to turn the box off +10 times?

i turn my plugs off at night when going to bed you see and ill be pissed if it bricks

[DW190]

so if i have a clone and turn it off 10 times, it wont come back on??

also putting this f/w on the box will allow you to turn the box off +10 times?

i turn my plugs off at night when going to bed you see and ill be pissed if it bricks

By using this firmware you should sleep with ease.

[r0nnie]

By using this firmware you should sleep with ease.

well im still waiting for royal mail to come, hopefully theyre here today, so im also hoping its NOT a clone

cheers

[testomik]

Please help me!
Where I can find firmware for my clone Openbox S1 ?
I inadvertently flashed the new firmware v22, and he died.
I am looking for clone version 6.0

[DW190]

Please help me!
Where I can find firmware for my clone Openbox S1 ?
I inadvertently flashed the new firmware v22, and he died.
I am looking for clone version 6.0

Just go back through this thread and you will find it.

[slugworth]

s1 is totally different

[lee3272]

Has anyone tried this firmware on s12 does it sort out the booting from cold problem ive got a s12 not sure how to tell if its clone or not

[mezzyg]

It works fine on a s12, I don't know if it sorts out the problem you described though

[spannande]

Hi,

Looking for another firmware to flash my Openbox S10 with and what I understand is that this should be the best version "March 2011 Firmware: - 25/03/2011
CONM_CHDS2_CMT_SkyBox.abs." or should I go with another?

[gibs]

I flashed this onto my clone S9 and got greyed out menu's.

Although I had tried the Anonymous S9 firmware previously which had major audio sync issues and I'm not sure if I reset back to defaults before trying the 25/03/2012 firmware...

I'll have to check it out tonight and see if that was the problem.

[forcefull]

Hi all , I have openbox S1 problem ,where can i download clone type firmware?

[roycey]

Hey guys im new to all this, purchased my box yesterday, the price i got it for, im assuming it is a clone.
which is the best clone safe one to try.

thanks in advance

[Shady]

dont be so certain you have a clone. check it bu going to menu > tool > info > then pres 8888 on keypad. check ur chip id against this list
00D0 00D0
00EA 00EA
085B 085B
0D0C 0D0C
98A1 98A1
98F2 98F2
9CF4 9CF4
9D1A 9D1A
if it matches one of them its an original

[dj1978]

is this safe to put onto a s11 and is it really clone killer safe.thnx

[nicocl]

Hi, is preconfigured to install any satellite with transpoint

[poppyjack]

Here is the clone safe firmware by anonymouSX with full Uk channel list and time setting in the image.

Can this firmware be used for a Skybox S12 clone?

Thank's

[swe74]

Is this still best for S10

[mezy]

hi all....can u guys help me..

i have openbox s16...but i not sure is it clone or original...if clone, where can i get the latest firmware?

1 more, the old version cannot make backup file...i want to backup my cccam data....any idea?



btw i'm from malaysia

[paldim]

which is the best clone s9 firmware with ccam key edit

[magbag]

Where can I download the latest OpenBox S10 Firmware thats clone safe

[maca]

http://www.digital-kaos.co.uk/forums/f184/ajs-sky-uk-channel-list-updated-regularly-260273/

[perfil2012]

Hola
Necesito un firware para latino america, para un openbox s10 plis

[tuggy]

Hi

Has anyone got the latest firmware foropenbox s11 to stop rebooting.
Thanks.

[coal1]

I like forcefull am looking for the latest version of firmware for an S1 ..... would prefer a usb upload if possible... box is an original .

[Raxone]

Hvala.Hvala.Hvala:hvala

[Hawk.]

Would anyone know if it's ok to use clone firmwares on original box s11? If not, where can I find original firmware?

Thanks.

[slugworth]

what's on it now?

[Hawk.]

Pardon my stupidity, but how do I check which firmware is on the box? When in sleep mode, the box turns itself off and it has to be booted again which takes a long time. Something wrong with the firmware, I think.

Thanks

[mtv1]

go to menu

and fiddle about a bit will say setup somewhere system

network

all the jibbly bits

or u could get the latest filmware pop it on a usb stick

put it in the usb slot go to menu scroll down till u see upgrade by usb ;)

bobs yer uncle

[slugworth]

Pardon my stupidity, but how do I check which firmware is on the box? When in sleep mode, the box turns itself off and it has to be booted again which takes a long time. Something wrong with the firmware, I think.

Thanks
in the menu-information screen last item is the firmware rev which has the date as part of the name

[onken]

Hello

please send me link to last firmware to clone box - S10 :)

Please not RED Gui :)

[africano]

I DID USE ONE OF THE SOFTWARE FOR CLONE AND IT WAS ALL OK. MY OPENBOX HAD HANGED IN BOOTING MODE. THANKS TO THE MEMBERS WHO UPLAODED IT

[jules60000]

is there a how to page for the open box x3

[mtv1]

your on it ask away ;)

[daimond]

my box stil noth boot after boot. it stays on and blue screen

[jalexx]

Anybody else confirm working on chinesse clone s10?

[jalexx]

yes, you must backup! dump tp_prog.dbs to usb first to save channels data, next flash up, then restore from usb

[hechu]

Where can I download the latest OpenBox S10 Firmware?


you can find it here Download / Software / Skybox F3/M3_Shenzhen Yojia Technology Co., Ltd. (http://www.yojiatech.com/a/Support/Download/Skybox_F3/)

[dedemccaw]

Hi people, just got my first box... "Openbox X3" Not sure if my box is a clone or not, so need a clone safe firmware update is the update on page one safe enough?

Thanks dedemccaw

[dedemccaw]

Bump, will this software work for an openbox x3, or is it only for s9/s10

Thanks dedemccaw

[djurhuus]

Will this work on a s11?

[Mick61]

I'm italian. i have a openbox S9 clone

[ventura580]

hello, my skybox f3 have this problem, start the count of the number 100 but starts again at the end, I have already installed firmware and backup and several things but still the same, when connected to the tv just shows the logo and skybox restarts. someone can help me fix it or tell me if my skybox has no solution, thanks in advance

[schwebs68]

HI ,

I'm looking for the last openbox S10 firmware , i have some trouble with hd channels.

thanks.