Santa Fe 2011

[remhonda]

95910-2b180
BOSCH 0258 010 625
hello
Please help to remove the crash in this block ...
thanks in advance

[morfej]

....................................

[remhonda]

hello
I checked your dumps - Test2 - the lamp is not extinguished, the test - went out and caught fire, all the bags are new. Unfortunately for the diagnosis of the machine does not (((
you have other suggestions for this unit?

[hamwi]

try and agine

[remhonda]

I'm sorry - but I can not open the archive, please repeat

[hamwi]

I'm sorry - but I can not open the archive, please repeat

chek in BM

[remhonda]

you give does not work - for internal fault diagnosis ... I am attaching a dump - I got that diagnosis is correct, but the lamp lights ... who will have thought about it

[Alex789]

Mate, i have a thought :)

[moto111]

Mate, i have a thought :)


Did this crash data work i have the same module please??

[Alex789]

Did this crash data work i have the same module please??

Yes. You can try.

[moto111]

Yes. You can try.


thanks alex the reason i ask isi have to send it back in the post and he is about 200 miles away

[Alex789]

This dump is crash free. The car should be with exchanged airbags after incident. If something in the vehicle will be wrong airbag light will come on. It's better if person who will install this module have diagnostic scanner to check possible problems (airbag/wires/connectors).

[moto111]

ok perfect alex, thanks for taking the time...........

[moto111]

Hi alex, customer reports that he cannot get into the module now to clear the faults any suggestions please?

[Alex789]

Hi. You don't need to use my dump directly. You have to find what i changed in original dump of "remhonda" and make such correction in your original one. I thought that you would do in such manner. Use your corrected dump only!

[moto111]

Have this board on my bench and forgot to mark where pin 1 was before removing could somebody please point to the purple or red mark as to which one pin one is please

[pititec]

HI, pin 1 is purple point...........i have crash file too and i can't found clear. tell me if you solve this car.

[zend]

First of all, attach the original dump file.

[blinpc]

Thanks for Alex789, same problew solved.
module 95910-0W100, eep 95640

[sawatdee0999]

This car is a can bus system for the airbag. you must scan it either any scanner with a can bus. the program has to be able to communicate threw can bus. if you don't have one
then your out of luck scanning for fault. If you have a launch. Scan using Sonata higher year since they were equipped with a can bus airbag system too. once you do that. you'll be all right clearing any fault codes. unless its internal program code error.