DAS and XENTRY-install in one step!

[selefkos]

hi guys,
here is the solution to install DAS and XENTRY in one step!!!
I've tested in three Mashines(IBM T30 ,Panasonic-CF 52 and Panasonic CF-29)!
1: change with this Tool your Harddiskdrive-number with the following serrials:

C: B826-A0F8

D: 8CF2-83A0

E: 8F0D-E990

F: 91E3-C5E0

2: reboot your Mashine and generate in Starutils for DAS and XENTRY a new Start-Key!!!
3: run in the SD-DVD the SDSwitch-installer.exe and you will see the result!!!

regards
Selefkos

:top::top::top::top:

[alexG]

Hi.
This is the best and fast way to install Das ,Xentry 09.2011
Thanks a lottttttttttttttttt

[pesona]

I try to update from 07-2011 using this trick.

And I see this result:
I get partition error and -5011 error.

So I still have to use compact4 reg to handling partition error and still have to use vladimir solution to handling -5011 error.

Anybody else get other result?

I will try to install das-xentry from scratch and see the result.

[selefkos]

hi m8,
first of all...run the solution from Mr-Zolookas from here!

http://www.digital-kaos.co.uk/forums/f152/das-installation-guide-updated-2011-a-226318/#post1241251

PS: after that,do not forget to change in the reg. from

BASICXP to COMPACT4

regards
selefkos

[impactops]

And I see this result:
I get partition error and -5011 error.

That's because he's forgotten to mention the 50million steps before this one step.This gives the illusion that with this method you can install das with a fresh copy of windows and no registry preparation required.

In other words he's forgotten the...Bla..Bla..Bla

Regrads
Impactops

[selefkos]

That's because he's forgotten to mention the 50million steps before this one step.This gives the illusion that with this method you can install das with a fresh copy of windows and no registry preparation required.

In other words he's forgotten the...Bla..Bla..Bla

Regrads
Impactops


It's true m8, but I think ... we all know what we need for the installation!!!

50million steps?????

regards
Selefkos

[impactops]

It's true m8, but I think ... we all know what we need for the installation!!!

50million steps?????

regards
Selefkos

Then you can't call it a one step solution then can you.Besides you have not stated what the difference is with or without the serial numbers since they still have to use the guide?

Regards
Impactops

[selefkos]

ok m8 you are right!
without this fix,many machines would not be able to
install XENTRY during the SD-Update-setup!

regards
Selefkos

[impactops]

Besides you have not stated what the difference is with or without the serial numbers

You still haven't mentioned it, i don't know about others but i would like to know preferably without having to re-install it to find out.

Can you please tell us what it does?

Regards
Impactops

[selefkos]

ok m8,
i think..you have more machines!!!!!!!
run the SD-setup in one of this Machines with the fix and in another machine without the fix!!!

afterwards check your system if it has installed

"XENTRYYYYYYYYYYYYYYYYYYY"

after the installation...look for the errorlogs in dasuinst

You need these Serrial -nummbers to change your HDD-Serrialnumber!

Dont ask me where i got these Serrials!!!!

I Think ....you "capito" Mr.Impactops!!!

END of Story :-))))))

regards
Selefkos

[impactops]

This only tells me what to do!!

This does not explain what the procedure does, what the advantage is of having the serial numbers present.

By not explaining what it does one can argue that it is propaganda since none of the members have come back to report what it does either

Regards
Impactops

[MBGL]

It's fake.

Installation way of DAS/Xentry doesn't depends on HDD's serial numbers.

[selefkos]

It's fake.

Installation way of DAS/Xentry doesn't depends on HDD's serial numbers.

Hi Junior,

The HDDserial will change your HW and lan ID!!!


maybe,you will get one or more thanks for your useful contribution :top:

regards
Selefkos

[3abas27]

hi guys,
here is the solution to install DAS and XENTRY in one step!!!
I've tested in three Mashines(IBM T30 ,Panasonic-CF 52 and Panasonic CF-29)!
1: change with this Tool your Harddiskdrive-number with the following serrials:

C: B826-A0F8

D: 8CF2-83A0

E: 8F0D-E990

F: 91E3-C5E0

2: reboot your Mashine and generate in Starutils for DAS and XENTRY a new Start-Key!!!
3: run in the SD-DVD the SDSwitch-installer.exe and you will see the result!!!

regards
Selefkos

:top::top::top::top:

THANKS FREIND GOOD JOB RELLAY

[silva]

Hello selefkos,
I do not has to create my xentry license key.
How to make!!!!!
Thank you

[hagop1]

this is great result it worked for me .

thanks

[mirek123]

thanks for this solution

[cocoh]

hi guys,
here is the solution to install DAS and XENTRY in one step!!!
I've tested in three Mashines(IBM T30 ,Panasonic-CF 52 and Panasonic CF-29)!
1: change with this Tool your Harddiskdrive-number with the following serrials:

C: B826-A0F8

D: 8CF2-83A0

E: 8F0D-E990

F: 91E3-C5E0

2: reboot your Mashine and generate in Starutils for DAS and XENTRY a new Start-Key!!!
3: run in the SD-DVD the SDSwitch-installer.exe and you will see the result!!!

regards
Selefkos

:top::top::top::top:

Mr. Selefkos... YOUR solution its working with SD-DVD 11.2011?
Please... i need to know..

thank you for your support..

best regards

[selefkos]

Hi mate,
sorry that i'm not here so often and i will not be online for a long time due to some problems i'm currently facing.i still haven't installed the new SD version,but i'm sure that you can use my fix whenever you want to start a new system in your pc and when you update that system,you will not have to use this fix again.

regards selefkos

[billboard]

Mr. Selefkos... YOUR solution its working with SD-DVD 11.2011?
Please... i need to know..

thank you for your support..

best regards

why you dont test it???
its not so difficult
if not working then you can put older hw

tip - it work