View Full Version : TMG220 not picking up Transponders on Satellite
kgom
23rd October, 2011, 08:37 PM
Good day
I have a TGM220 to which i recently added the satellite tuner. When i scan for transponders I get nothing. I am directly connected to the lnb and tried the connection on an old Coolsat receiver which worked.
I am using the Edy Nemesis 4.4 and the dish is pointing to 110.0W.
Any suggestions on what I maybe doing wrong ?
Kirk
Millzzy
31st October, 2011, 11:01 AM
If u bought the tuner from the Spanish shop try taking the lid off the itgate and pulling the tuner up slightly , they don't like being pushed all the way in
kgom
29th February, 2012, 01:33 AM
Thx Millzzy, tried your suggestion. The box seems to only function when the tuner is registering as connected correctly.
I am trying the UKURv9 image now with the satellite pointing to 119.0W. I have the satellite configuration as:
non-standard user defined configuration
Echostar 14 (119.0W)
LOF/L: 11250
LOF/H: 11250
Threshold: 11700
22Khz: Hi/Lo
Voltage: H/V
Transponder edit
Echostar 14 (119.0W)
Orbital position: 1190 West
Network Search
Freq: 12297MHz
Polarity: vertical
FEC:Auto
Symbol Rate: 20000KSymb/s
I get the following consistently
SNR 19%
AGC: 17%
BER: 0.00 - 5.0e-2
This should be dish USA. It works fully on a coolsat, but not on the Itgate.
Any suggestions as to what the problem could be ?
Regards
Kirk
mept1
29th February, 2012, 09:08 AM
You might have to ftp your local sat xml in var/etc,if your sat your pointing at (119.0) is not in the sat config drop down menu,you can genarate one here.
satellites.xml generator (http://www.satellites-xml.com/)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.